Doom

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 5070 combination delivers exceptionally high frame rates in Doom, making the game highly playable at all tested resolutions and settings. The data shows that this pairing is capable of pushing the game far beyond the 60 FPS playable threshold, with even the most demanding Ultra preset at 4K maintaining an average of 71.7 FPS. This analysis breaks down how this combo performs, what alternatives exist, and how to optimize settings for your preferred resolution.

Similar Performance Alternatives

Based on aggregate benchmark scores, the AMD Ryzen 5 7500F performs nearly identically to several other CPUs. The closest rival is the AMD Ryzen 5 8400F, which scores a mere 0.2% lower in average benchmark performance. Similarly, the Intel Core i7-11850H is just 0.1% behind, while the Intel Core i7-13620H and Intel Core 5 210H trail by 0.2% and 0.4%, respectively. In practical terms, any of these processors would deliver essentially the same frame rates in Doom when paired with the RTX 5070, as the game is not heavily CPU-bound at the tested settings.

For the GPU side, the NVIDIA GeForce RTX 5070 has a very distinctive set of nearest rivals based on average benchmark scores. The AMD Radeon Pro 580 is only 0.1% faster, while the AMD Radeon Pro WX 7100 is 0.8% slower. The AMD Radeon Pro 5300 is 1.2% faster, and the NVIDIA RTX A500 Mobile is 2% slower. It is important to note that these rival GPUs are professional or mobile workstation parts, not direct gaming competitors. However, the benchmark data indicates that in raw compute terms, their performance is in the same ballpark as the RTX 5070. For Doom specifically, the RTX 5070's architecture and drivers are likely to provide a smoother experience, but the raw score similarities suggest these alternatives would produce comparable average frame rates.

CPU and GPU Roles

In Doom, the balance between CPU and GPU workload shifts as resolution changes. At 1920x1080, the system is more likely to be CPU-bound, as the GPU has less pixel-pushing work to do. The frame rate difference between Low and Ultra settings at 1080p is significant, going from 340.8 FPS to 206.9 FPS, which indicates that graphical settings have a large impact on GPU load. However, even at Low settings, the CPU must feed the GPU fast enough to hit 340.8 FPS, and the Ryzen 5 7500F's strong single-thread performance (evidenced by its 3dmark_single_thread score of 974) is sufficient for this task.

As resolution increases to 2560x1440, the GPU becomes the primary bottleneck. The gap between Low and Ultra settings narrows in percentage terms but remains large in absolute FPS, with 221.4 FPS at Low versus 132.3 FPS at Ultra. The RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are well-suited for the increased pixel and texture demands of 1440p. Moving to 3840x2160, the GPU load dominates even more. The Ultra preset at 4K yields 71.7 FPS, while Low pushes to 121.7 FPS. This scaling shows that the CPU has ample headroom, as the frame rate drop from Low to Ultra at 4K is driven almost entirely by the GPU's rendering workload.

The data suggests that for this combo, the GPU is the limiting factor at every resolution above 1080p. At 1080p, the CPU is still capable of delivering over 340 FPS on Low settings, so it is not a practical bottleneck. The Ryzen 5 7500F's 6 cores and 12 threads are more than adequate for Doom's engine, which does not heavily utilize multi-threading beyond a few cores. In summary, the RTX 5070 dictates performance at 1440p and 4K, while the CPU is more than sufficient at all resolutions.

Measured FPS Breakdown

The measured FPS data provides a clear picture of how this combo performs across three resolutions and four settings presets. All numbers represent average FPS, as min and max FPS values were not recorded in the data.

At 1920x1080, the frame rates are exceptionally high. With Low settings, the average is 340.8 FPS. Moving to Medium, the average drops to 292.5 FPS, a decrease of about 48 FPS. High settings yield 251.7 FPS, and Ultra settings bring the average down to 206.9 FPS. Even at the most demanding 1080p preset, the frame rate is more than triple the 60 FPS playable threshold.

At 2560x1440, the performance remains very strong. Low settings produce an average of 221.4 FPS. Medium settings reduce this to 189.1 FPS, while High settings yield 163.1 FPS. Ultra settings at 1440p still maintain a high average of 132.3 FPS. The scaling from Low to Ultra shows a drop of nearly 90 FPS, highlighting the GPU's workload at this resolution.

At 3840x2160, the frame rates are lower but still well above playable levels. Low settings average 121.7 FPS. Medium settings drop to 100.7 FPS, and High settings produce 86.7 FPS. Ultra settings at 4K average 71.7 FPS. This is the only resolution where the Ultra preset falls below 100 FPS, but it remains comfortably above the 60 FPS threshold. The data shows a consistent pattern: each step up in settings costs roughly 15-20% performance, and each step up in resolution costs a similar amount.

FAQ

*Q: Can this combo run Doom at 4K with maximum settings?*

A: Yes. The measured data shows that at 3840x2160 with Ultra settings, the average FPS is 71.7, which is above the 60 FPS playable threshold.

Q: What is the best resolution to use for the highest possible frame rates?

A: At 1920x1080 with Low settings, the combo achieves an average of 340.8 FPS, which is the highest frame rate recorded in the data. Even at 1080p Ultra, it maintains 206.9 FPS.

Q: How much performance is lost when switching from High to Ultra settings?

A: The performance loss varies by resolution. At 1080p, the drop from High (251.7 FPS) to Ultra (206.9 FPS) is about 45 FPS. At 1440p, it drops from 163.1 FPS to 132.3 FPS, a loss of roughly 31 FPS. At 4K, it goes from 86.7 FPS to 71.7 FPS, a loss of 15 FPS.

Q: Is the Ryzen 5 7500F a bottleneck for the RTX 5070 in this game?

A: The data suggests it is not a significant bottleneck. At 1080p Low, the combo hits 340.8 FPS, indicating the CPU can feed the GPU quickly. The CPU's 3dmark single-thread score of 974 and Cinebench R23 single-core score of 3218 show strong single-thread performance, which is what Doom relies on.

Q: Are all settings presets playable at every resolution?

A: Yes, according to the verdict data. All four settings presets (Low, Medium, High, Ultra) are listed as playable at 1080p, 1440p, and 4K, as all measured averages exceed the 60 FPS threshold.

Q: How does this combo rank compared to other tested combinations?

A: The combo rank for this game is 671 out of 3712 tested combos. This places it in the top 18% of all tested systems, indicating above-average performance for Doom.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average FPS at or above 60 is the Ultra preset. The data confirms that this is the highest quality setting available and it remains playable at all three resolutions.

At 1920x1080, the best settings are Ultra, which yields an average of 206.9 FPS. This provides the maximum visual quality while still delivering frame rates far above the playable threshold, making it ideal for high-refresh-rate monitors.

At 2560x1440, the best settings are also Ultra, with an average of 132.3 FPS. This is well-suited for 1440p gaming, offering a smooth experience with all visual features enabled.

At 3840x2160, the best settings remain Ultra, averaging 71.7 FPS. This is the only resolution where the Ultra preset dips below 100 FPS, but it still comfortably exceeds the 60 FPS playability threshold. For players who prefer higher frame rates at 4K, the High preset (86.7 FPS) or Medium preset (100.7 FPS) are viable alternatives, but Ultra is the highest quality option that remains playable.

How This Combo Ranks

In the database of tested hardware combinations for Doom, the AMD Ryzen 5 7500F paired with the NVIDIA GeForce RTX 5070 ranks 671st out of 3712 total combos. This places the pairing in the top 18.1% of all tested systems, which is a strong result. The rank is a reflection of the overall capability of this duo, considering both the CPU's 77th percentile ranking among all CPUs and the GPU's 82nd percentile ranking among all GPUs.

The high rank is driven primarily by the RTX 5070's excellent 4K performance, as the GPU's 82nd percentile score and 30.87 TFLOPS of FP32 compute power allow it to handle Doom's demanding Vulkan-based rendering engine with ease. The Ryzen 5 7500F, while only in the 77th percentile, does not hold the system back. Its 6 cores and 12 threads provide enough processing power for the game's AI and physics, and its high single-thread performance ensures that frame pacing remains consistent. The result is a combo that delivers exceptional frame rates across all resolutions, justifying its position in the top fifth of all tested configurations. While there are faster combinations, this pairing hits a sweet spot for high-refresh-rate 1440p and smooth 4K gaming.