Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

58%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
258 FPS
Ultra 1080p Measured
155 FPS

1440p (2K / QHD)

Low 1440p Measured
167 FPS
Ultra 1440p Measured
100 FPS

4K (Ultra HD)

Low 4K Measured
90 FPS
Ultra 4K Measured
54 FPS
5.3ms Frame Time
8ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 21,771
Graphics Card
Required 27,325
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 67 79 90
1440p QHD 100 123 145 167
1080p Full HD 155 190 225 258

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 190
1920x1080 Low 258
1920x1080 Medium 225
1920x1080 Ultra 155
2560x1440 High 123
2560x1440 Low 167
2560x1440 Medium 145
2560x1440 Ultra 100
3840x2160 High 67
3840x2160 Low 90
3840x2160 Medium 79
3840x2160 Ultra 54

Performance Analysis: Doom on Your System

How This Combo Ranks

The AMD Ryzen 5 5600X paired with the NVIDIA GeForce RTX 3070 sits at rank 1596 out of 3712 tested combos for Doom. That places this configuration in the upper half of all tested systems, though not near the very top. The CPU holds a 75th percentile rank among all processors, while the GPU sits at the 61st percentile among all graphics cards. This combination of a strong mid-range CPU with a solidly above-average GPU produces frame rates that comfortably exceed the 60 FPS playability threshold at most settings, but the data reveals some interesting ceilings at the most demanding preset.

The ranking position suggests this combo is neither a budget outlier nor a top-tier enthusiast build. It represents a balanced pairing where the GPU becomes the limiting factor at higher resolutions, while the CPU provides ample headroom at lower resolutions. The benchmark data confirms this split: at 1080p, the system reaches 258 FPS on Low settings, indicating the CPU and GPU together can push well beyond typical display refresh rates. At 4K Ultra, however, the average drops to 54 FPS, falling below the playable threshold. This spread of performance across resolutions tells a clear story about where this hardware excels and where it strains.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 155 FPS. The system maintains excellent headroom even at the highest quality settings, making 1080p Ultra the recommended configuration for maximum visual fidelity without sacrificing smoothness.

At 2560x1440, Ultra also remains the best playable preset, delivering an average of 100 FPS. This represents a significant step down from the 1080p result but still provides more than enough performance for high-refresh-rate monitors. The gap between 1080p Ultra (155 FPS) and 1440p Ultra (100 FPS) shows a 35% performance drop, which aligns with the increased pixel count demanding more from the GPU.

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 67 FPS. Ultra drops to 54 FPS, which falls short of the 60 FPS threshold. Medium achieves 79 FPS and Low reaches 90 FPS, but High offers the best balance of visual quality and playable performance at 4K. The 13 FPS difference between High and Ultra at this resolution highlights how steeply the RTX 3070's performance curve declines with the highest settings.

FAQ

Q: Can this system run Doom at 4K with maximum settings?

A: No. At 3840x2160 with Ultra settings, the average frame rate is 54 FPS, which falls below the 60 FPS playable threshold. The best playable preset at 4K is High, averaging 67 FPS.

Q: What is the highest frame rate this combo achieves in Doom?

A: The highest average frame rate recorded is 258 FPS at 1920x1080 with Low settings. Medium at 1080p reaches 225 FPS, and High at 1080p averages 190 FPS.

Q: How does performance scale between 1080p and 1440p?

A: At Ultra settings, performance drops from 155 FPS at 1080p to 100 FPS at 1440p, a decrease of 35%. The scaling is consistent across presets: Low drops from 258 to 167 FPS, Medium from 225 to 145 FPS, and High from 190 to 123 FPS.

Q: Is the RTX 3070 or the Ryzen 5 5600X more important for this game?

A: The data suggests the GPU becomes the primary constraint at higher resolutions. At 4K, the gap between Low (90 FPS) and Ultra (54 FPS) is 36 FPS, indicating heavy GPU load from settings. At 1080p, the same settings gap is 103 FPS (258 to 155), suggesting the CPU has more influence when the GPU is less stressed.

Q: What is the playable threshold and which settings cross it?

A: The playable threshold is 60 FPS. At 4K, Low (90 FPS), Medium (79 FPS), and High (67 FPS) cross it, while Ultra (54 FPS) does not. At 1440p and 1080p, all four presets exceed 60 FPS.

Q: How does this combo rank among all tested systems for Doom?

A: This configuration ranks 1596 out of 3712 tested combos, placing it in the 57th percentile of all systems tested. The CPU's 75th percentile and GPU's 61st percentile contribute to this mid-to-upper ranking.

Similar Performance Alternatives

The CPU's nearest rivals in benchmark scores are the AMD Ryzen 7 4800H, which scores 0.1% higher than the Ryzen 5 5600X, and the AMD Ryzen 5 PRO 6650U, which scores 0.5% lower. The Intel Core i7-11700 also sits 0.5% below, while the AMD EPYC 9554P trails by 0.6%. These processors would deliver nearly identical CPU-bound performance in Doom, meaning the choice between them would have minimal impact on frame rates at lower resolutions where the CPU matters more.

On the GPU side, the nearest rivals are the AMD Radeon RX 7600 XT, which scores 0.7% higher, and the NVIDIA GeForce GTX 690, which scores 1% higher. The AMD Radeon HD 7970M sits 1.1% higher, while the NVIDIA Tesla K40c scores 1.5% lower. These graphics cards would produce very similar GPU-bound performance at higher resolutions and settings. The RX 7600 XT in particular would be a nearly direct substitute, with the small delta suggesting it would hit the same FPS ceilings in Doom at 4K and 1440p.

The practical implication is that swapping the Ryzen 5 5600X for any of these CPUs, or the RTX 3070 for the RX 7600 XT, would shift performance by less than 2%. In real-world gameplay, these differences would be imperceptible, and the playable settings at each resolution would remain identical. The GTX 690 and HD 7970M are notably older architectures, yet their benchmark scores indicate they would still match the RTX 3070 in this specific game, which speaks to Doom's optimization and the nature of the benchmark metrics.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest performance. Low settings average 258 FPS, Medium averages 225 FPS with a minimum of 191 and maximum of 258, High averages 190 FPS, and Ultra averages 155 FPS. The tight range between minimum and maximum at Medium (191 to 258) indicates consistent frame pacing, with the minimum still well above the 60 FPS threshold.

At 2560x1440, performance scales down proportionally. Low averages 167 FPS, Medium averages 145 FPS with a range of 124 to 167, High averages 123 FPS, and Ultra averages 100 FPS. The Medium settings minimum of 124 FPS shows that even in demanding scenes, the system maintains more than double the playable threshold.

At 3840x2160, the performance curve steepens. Low averages 90 FPS, Medium averages 79 FPS with a range of 67 to 91, High averages 67 FPS, and Ultra drops to 54 FPS. The Medium minimum of 67 FPS exactly matches the High average, indicating that some scenes at Medium can be more demanding than typical High settings. The Ultra result of 54 FPS is the only preset across all resolutions that fails to clear the 60 FPS playable threshold.

The data reveals an interesting pattern: the gap between Low and Ultra widens as resolution increases. At 1080p, the difference is 103 FPS. At 1440p, it's 67 FPS. At 4K, it's 36 FPS. This suggests that at lower resolutions, the CPU and GPU have more headroom to absorb the visual complexity of Ultra settings, while at 4K, the GPU is already near its limit even at Low settings, leaving less room for settings to make a difference.

The Verdict

This PC can run Doom, but the answer depends heavily on resolution and settings. At 1920x1080, all four presets clear the 60 FPS threshold, with Ultra averaging 155 FPS. This makes 1080p the most versatile resolution, offering playable performance at maximum quality and extreme frame rates at lower settings. At 2560x1440, Ultra averages 100 FPS, also clearing the threshold comfortably, making 1440p Ultra a viable choice for high-refresh-rate displays.

At 3840x2160, the system can run the game but only up to High settings, which average 67 FPS. Ultra falls to 54 FPS, below the playable threshold. For 4K gaming, users would need to accept High settings or lower to maintain smooth performance. The verdict by resolution is clear: 1080p and 1440p offer full freedom of settings, while 4K requires a compromise on visual quality to stay above 60 FPS.

The verdict data lists the best settings at each resolution as High at 4K (67 FPS), Ultra at 1440p (100 FPS), and Ultra at 1080p (155 FPS). These represent the highest quality presets that maintain playable frame rates. The system is definitively capable of running Doom, with the only limitation being 4K Ultra, which is a demanding combination even for hardware significantly more powerful than this.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component dominates Doom's performance at each setting. At 1080p, the gap between Low (258 FPS) and Ultra (155 FPS) is 103 FPS, indicating that settings changes have a dramatic impact on frame rate. This suggests the GPU is not the bottleneck at lower resolutions, because even the most demanding preset still achieves very high frame rates. The CPU's 6 cores and 12 threads, with a boost clock of 4.60 GHz, provide enough headroom to feed the GPU at these high frame rates.

At 1440p, the settings gap narrows to 67 FPS (167 Low vs. 100 Ultra), showing that the GPU begins to take on more load. The pixel count increase from 1080p to 1440p is about 78%, yet the frame rate drop at Ultra is 35%, which is less than linear scaling would suggest. This indicates the GPU is becoming a larger factor but the CPU still contributes meaningfully.

At 4K, the settings gap narrows further to 36 FPS (90 Low vs. 54 Ultra), and the absolute frame rates drop significantly. The GPU is clearly the dominant constraint at this resolution, as even Low settings only reach 90 FPS. The CPU's role diminishes because the GPU cannot render frames fast enough to require more CPU throughput. The 4K Ultra result of 54 FPS, below the playable threshold, reinforces that the RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are being fully utilized, while the CPU waits.

The data implies that for Doom, the CPU matters most at 1080p where high frame rates demand quick draw call processing and physics calculations. The GPU becomes increasingly important as resolution rises, eventually becoming the sole limiting factor at 4K. Users with high-refresh-rate 1080p monitors would benefit most from a stronger CPU, while those targeting 4K should prioritize GPU upgrades. This combo's balance is well-suited for 1440p, where both components contribute meaningfully without either becoming a severe bottleneck.