Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
334 FPS
Ultra 1080p Measured
256 FPS

1440p (2K / QHD)

Low 1440p Measured
276 FPS
Ultra 1440p Measured
163 FPS

4K (Ultra HD)

Low 4K Measured
146 FPS
Ultra 4K Measured
91 FPS
3.3ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 21,088
Graphics Card
Required 27,325
Your GPU 56,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 91 109 133 146
1440p QHD 163 203 243 276
1080p Full HD 256 300 316 334

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 300
1920x1080 Low 334
1920x1080 Medium 316
1920x1080 Ultra 256
2560x1440 High 203
2560x1440 Low 276
2560x1440 Medium 243
2560x1440 Ultra 163
3840x2160 High 109
3840x2160 Low 146
3840x2160 Medium 133
3840x2160 Ultra 91

Performance Analysis: Doom on Your System

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 5080 delivers extreme performance in Doom, with every tested resolution and preset configuration clearing the 60 FPS threshold by a wide margin. The RTX 5080’s raw throughput dominates, while the Ryzen 5 5600G provides sufficient single-thread muscle to keep frames flowing even at 1080p. Measured data shows average frame rates ranging from 90.7 FPS at 4K Ultra to 334.1 FPS at 1080p Low, indicating that this combination is effectively overkill for the game’s engine. Below is a structured breakdown of settings, component roles, and comparative performance.

FAQ

Q: What is the highest playable preset at 3840x2160?

A: At 4K, all four tested presets (Low, Medium, High, Ultra) remain above the 60 FPS playable threshold. The most demanding preset that stays at or above 60 FPS is Ultra, with an average of 90.7 FPS.

Q: Does the Ryzen 5 5600G bottleneck the RTX 5080 in this game?

A: Benchmark results indicate no significant bottleneck. At 1920x1080, the average frame rate reaches 334.1 FPS on Low settings, suggesting the CPU’s single-thread performance (3dmark_single_thread score of 872, Geekbench single-core of 1801) is sufficient to feed the GPU even at high frame rates.

Q: How much faster is 1080p compared to 4K at the same settings?

A: At Ultra settings, the 1920x1080 average of 255.6 FPS is 2.8 times higher than the 3840x2160 average of 90.7 FPS. At Low settings, the gap widens to 2.3 times (334.1 FPS vs. 146.4 FPS).

Q: What is the combo’s overall ranking among tested systems?

A: The combination ranks 246th out of 3712 tested combos in Doom, placing it in the top 6.6% of all configurations measured.

Q: Is the RTX 5080’s performance consistent across DirectX and Vulkan?

A: The GPU’s benchmark scores show strong cross-API performance: Geekbench Vulkan score is 255450, while Geekbench OpenCL is 235901. The game itself benefits from high raw throughput, as evidenced by the PassMark G3D score of 36565.

Q: Can the system handle 4K Ultra with headroom for frame drops?

A: Yes. The 4K Ultra average of 90.7 FPS provides roughly 51% headroom above the 60 FPS threshold, meaning typical frame-time spikes are unlikely to cause perceptible stutter.

Best Settings per Resolution

At 1920x1080, the most demanding preset that keeps the average at or above 60 FPS is Ultra, yielding an average of 255.6 FPS. Every lower preset exceeds this as well: High (300.2), Medium (315.7), and Low (334.1). The GPU’s 16 GB of GDDR7 memory and 960.0 GB/s bandwidth are far beyond what this resolution requires.

At 2560x1440, the ceiling remains Ultra with an average of 163.2 FPS. The delta between presets is substantial: High drops to 202.9, Medium to 243.1, and Low to 275.7. Even at this resolution, the rendering pipeline is heavily GPU-bound, allowing the RTX 5080 to stretch its legs.

At 3840x2160, Ultra remains playable with an average of 90.7 FPS. The scaling from 1440p to 4K is roughly 1.8 times more demanding (163.2 → 90.7 FPS), but the system still clears the threshold comfortably. High (108.6), Medium (132.7), and Low (146.4) all provide additional headroom for those prioritizing frame rate over visual fidelity.

Across all resolutions, the data shows a monotonic relationship: higher presets cost proportionally more frames, but never enough to breach the 60 FPS floor. The widest gap between presets occurs at 4K, where Ultra (90.7) is 38% slower than Low (146.4).

CPU and GPU Roles

The RTX 5080 is the dominant performance driver in Doom, with the Ryzen 5 5600G playing a supporting role that becomes more relevant only at lower resolutions. The evidence lies in the scaling pattern: from 4K to 1080p, average frame rates roughly triple (90.7 → 255.6 at Ultra). This 2.8x increase indicates that the GPU’s fill rate and shading capacity are the primary constraining factors at 4K, while the CPU’s 6 cores and 12 threads (Cinebench R23 multicore score of 10551) are sufficient to keep up.

At 1080p, the CPU’s influence becomes measurable. The difference between Low (334.1 FPS) and Ultra (255.6 FPS) is 78.5 FPS, a 23.5% drop that reflects increased draw calls and physics computations. The Ryzen 5 5600G’s single-thread performance (3dmark_single_thread 872, PassMark single-thread 3177) is adequate for this workload, but it does cap the absolute maximum frame rate. The 3dmark_16_threads score of 5451 suggests the processor can handle multiple game threads, yet Doom’s engine relies heavily on single-thread efficiency.

Comparing resolutions, the GPU load shifts dramatically. At 1440p, the average at Ultra (163.2 FPS) is 64% higher than at 4K, indicating that the RTX 5080 has spare throughput that the higher resolution consumes. At 1080p, the gap between Medium (315.7) and Low (334.1) narrows to just 5.5%, showing that the CPU starts to limit gains at very high frame rates. The RTX 5080’s 56.28 TFLOPS FP32 throughput and 879.3 GTexel/s texture rate are far ahead of what any 1080p preset demands.

Similar Performance Alternatives

On the CPU side, the Ryzen 5 5600G’s average benchmark score of 21088 places it within 0.4% of several rivals. The Intel Core i3-1220P (avg 21066, delta 0.1%) is effectively identical in overall compute performance, though its mobile-oriented design may differ in sustained loads. The AMD Ryzen 5 7530U (avg 21133, delta -0.2%) and Intel Core Ultra 7 256V (avg 21112, delta -0.1%) are also within a fraction of a percent, meaning any of these would yield nearly identical frame rates in Doom. The Intel Core Ultra 7 155U (avg 21174, delta -0.4%) trails by a negligible margin.

For the GPU, the RTX 5080’s average score of 56083 is closely matched by the AMD Radeon 8060S (avg 55757, delta 0.6%) and AMD Radeon RX 6750 GRE 12 GB (avg 55698, delta 0.7%), both of which would produce nearly the same FPS in this game. The AMD Radeon Pro W5700X (avg 54828, delta 2.3%) is slightly slower, while the AMD Radeon RX 9070 GRE (avg 57367, delta -2.2%) edges out the RTX 5080 by a small margin. For practical purposes, all these cards would deliver playable frame rates at every resolution, though the RX 9070 GRE might offer a few extra frames at 4K Ultra.

The Verdict

Yes, this PC can run Doom at every resolution and preset combination tested. The verdict data confirms that 3840x2160 is fully playable with Ultra settings at an average of 90.7 FPS. At 2560x1440, Ultra delivers 163.2 FPS, and at 1920x1080, Ultra reaches 255.6 FPS. No configuration dips below the 60 FPS playable threshold, making this an unambiguous recommendation for high-refresh-rate monitors or 4K displays.

The only caveat is that the Ryzen 5 5600G, despite being a capable Zen 3 processor, is not the ideal match for an RTX 5080 in CPU-bound scenarios. At 1080p Low, the 334.1 FPS average is likely close to the CPU’s ceiling, as evidenced by the small delta between Medium and Low. For users prioritizing maximum frame rates at 1080p, a stronger CPU could push higher, but for 1440p and 4K gaming, this combination is more than sufficient.

How This Combo Ranks

The combination ranks 246th out of 3712 tested configurations, placing it in the top 6.6% of all systems measured in Doom. This is a strong result, reflecting the RTX 5080’s high percentile placement (87th among all GPUs) and the Ryzen 5 5600G’s solid 74th percentile among CPUs. The rank suggests that the GPU is the primary driver of this placement, as the CPU’s percentile is modest by comparison. Systems with weaker GPUs but stronger CPUs would likely rank lower, while those with both high-end components would surpass this combo.

The 87th GPU percentile translates to excellent raw rasterization performance, which Doom’s id Tech 6 engine exploits effectively. The 74th CPU percentile is adequate but not elite, meaning the combo’s rank is slightly limited by the processor. Nevertheless, the measured FPS data shows that this limitation only manifests at extreme frame rates above 300 FPS, which exceed typical display refresh rates.

Measured FPS Breakdown

At 1920x1080, the system delivers the following average frame rates: Low 334.1, Medium 315.7, High 300.2, and Ultra 255.6. The progression from Low to Ultra shows a consistent 8-15% reduction per step, with the largest single drop occurring between High and Ultra (300.2 → 255.6, a 14.9% decrease). No minimum or maximum frames were recorded, but the averages suggest high consistency given the GPU’s massive headroom.

At 2560x1440, averages are: Low 275.7, Medium 243.1, High 202.9, and Ultra 163.2. The scaling from Low to Ultra is a 40.8% reduction, indicating that the increased pixel count amplifies the cost of higher settings. The gap between Medium and High (243.1 → 202.9) is the steepest at this resolution, a 16.5% drop, while Low to Medium is a more modest 11.8% decline.

At 3840x2160, averages are: Low 146.4, Medium 132.7, High 108.6, and Ultra 90.7. The Ultra preset is 38% slower than Low, but still clears the 60 FPS threshold by 51%. The transition from High to Ultra (108.6 → 90.7) represents a 16.5% penalty, consistent with the 1440p pattern. Across all resolutions, the RTX 5080’s 16 GB GDDR7 memory and 960.0 GB/s bandwidth prevent any memory-related stutters, even at 4K Ultra.