Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

54%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
228 FPS
Ultra 1080p Measured
137 FPS

1440p (2K / QHD)

Low 1440p Measured
147 FPS
Ultra 1440p Measured
89 FPS

4K (Ultra HD)

Low 4K Measured
80 FPS
Ultra 4K Measured
48 FPS
6ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 17,507
Graphics Card
Required 27,325
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 48 59 70 80
1440p QHD 89 108 128 147
1080p Full HD 137 167 198 228

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 167
1920x1080 Low 228
1920x1080 Medium 198
1920x1080 Ultra 137
2560x1440 High 108
2560x1440 Low 147
2560x1440 Medium 128
2560x1440 Ultra 89
3840x2160 High 59
3840x2160 Low 80
3840x2160 Medium 70
3840x2160 Ultra 48

Performance Analysis: Doom on Your System

The AMD Ryzen 5 4600G and NVIDIA GeForce RTX 4060 combination delivers a strong 60 FPS experience in Doom at 1080p and 1440p, but the 4K Ultra preset falls short. The measured data shows the combo ranks 2001 out of 3712 tested configurations in this game, placing it in the 54th percentile of all recorded setups. The RTX 4060, with its 8 GB GDDR6 memory and 272.0 GB/s bandwidth, handles the id Tech engine efficiently, while the Ryzen 5 4600G’s 6 cores and 12 threads provide enough headroom for the game’s CPU demands.

Measured FPS Breakdown

At 1920x1080, the combo produces its highest frame rates. With Low settings, the average FPS reaches 228, and Medium settings deliver 198 FPS with a minimum of 168 and a maximum of 228. High settings average 167 FPS, while Ultra settings still maintain a strong 137 FPS. All four presets at 1080p clear the 60 FPS playability threshold by a wide margin, with even the most demanding Ultra preset sitting more than double the threshold.

Moving to 2560x1440, the performance scales down but remains consistently above 60 FPS. Low settings average 147 FPS, Medium settings average 128 FPS with a minimum of 109 and a maximum of 148, High settings average 108 FPS, and Ultra settings average 89 FPS. The frame rate drops from 1080p to 1440p are noticeable but not dramatic: the Low preset falls from 228 to 147 FPS, a 35% reduction, while the Ultra preset falls from 137 to 89 FPS, a 35% reduction as well. Every preset at 1440p stays comfortably above the 60 FPS threshold.

At 3840x2160, the picture changes. Low settings average 80 FPS, Medium settings average 70 FPS with a minimum of 59 and a maximum of 80, High settings average 59 FPS, and Ultra settings average 48 FPS. The High preset at 4K sits just below the 60 FPS threshold, while the Ultra preset falls further to 48 FPS. The Medium preset, with its average of 70 FPS and minimum of 59 FPS, barely clears the threshold on average but dips below it at the low end. The resolution scaling from 1440p to 4K is severe: the Low preset drops from 147 to 80 FPS, a 45% reduction, and the Ultra preset drops from 89 to 48 FPS, a 46% reduction.

How This Combo Ranks

In the database, this specific CPU and GPU pairing ranks 2001 out of 3712 tested combos for Doom. That places it in the middle of the distribution, meaning roughly 54% of tested configurations perform better and 46% perform worse. This rank reflects the balance between the Ryzen 5 4600G and the RTX 4060: the GPU is capable of high frame rates at lower resolutions, but the CPU’s single-thread performance, as shown by its 726 score in the 3dmark single-thread test and 1919 in Cinebench R23 single-core, does not bottleneck the game at 1080p or 1440p.

The combo’s rank is not top-tier, but it is far from the bottom. For a game released in 2016, Doom’s Vulkan API scales well with modern hardware, and this pairing leverages that efficiency. The data shows that the combo clears 60 FPS at all presets except for 4K High and 4K Ultra, which aligns with the rank’s mid-table position. The RTX 4060’s passmark G3D score of 19545 and the CPU’s passmark multithread score of 15992 indicate a balanced system, but the 4K results reveal the GPU’s limitations at higher resolutions with demanding presets.

FAQ

Q: Can this PC run Doom at 60 FPS on 1080p Ultra settings?

A: Yes. The measured average FPS for 1920x1080 Ultra is 137 FPS, well above the 60 FPS playability threshold.

Q: What is the best preset at 1440p that stays above 60 FPS?

A: Ultra settings at 2560x1440 average 89 FPS, so all presets at this resolution clear the threshold. Ultra is the best preset with an average of 89 FPS.

Q: Is 4K playable with this combo?

A: Partially. Low and Medium presets at 3840x2160 clear 60 FPS on average, with Low at 80 FPS and Medium at 70 FPS. High and Ultra presets fall below the threshold, averaging 59 and 48 FPS respectively.

Q: How does the combo rank compared to other tested configurations?

A: It ranks 2001 out of 3712 combos, placing it in the 54th percentile. This means a slight majority of tested setups perform better in Doom.

Q: What is the minimum FPS recorded for Medium settings at 1080p?

A: The minimum FPS for 1920x1080 Medium is 168 FPS, with an average of 198 and maximum of 228.

Q: Does the CPU or GPU limit performance at 4K?

A: The data shows the GPU becomes the limiting factor at 4K. The CPU’s performance is sufficient at lower resolutions, but the RTX 4060’s 8 GB memory and 128-bit bus struggle with the Ultra preset at 4K, dropping the average to 48 FPS.

The Verdict

The verdict by resolution is clear. At 1920x1080, all four presets (Low, Medium, High, Ultra) are playable, with the best being Ultra at an average of 137 FPS. At 2560x1440, all four presets are also playable, with Ultra at 89 FPS as the best option. At 3840x2160, only Low and Medium presets are playable, with Medium at 70 FPS being the best choice. The High preset at 4K averages 59 FPS, just below the 60 FPS threshold, and Ultra averages 48 FPS.

This PC can run Doom at 60 FPS or higher for the vast majority of settings. The only failures occur at 4K with High and Ultra presets, where the GPU cannot maintain the threshold. For a 1080p or 1440p monitor, this combo is fully capable of running the game at maximum settings with high frame rates. For a 4K display, players should stick to Medium or Low settings to stay above 60 FPS.

Similar Performance Alternatives

The CPU’s nearest rivals in the database, based on average benchmark scores, include the AMD Ryzen 3 PRO 5355GE with an average score of 17482 and a delta of 0.1%, the Intel Core 7 150U with an average score of 17395 and a delta of 0.6%, the AMD Ryzen 3 8300GE with an average score of 17614 and a delta of -0.6%, and the Intel Core i3-14100T with an average score of 17648 and a delta of -0.8%. These processors are within 1% of the Ryzen 5 4600G’s average benchmark score of 17507, meaning they would behave nearly identically in this game, providing similar CPU-side performance without shifting the bottleneck.

On the GPU side, the RTX 4060’s nearest rivals include the AMD Radeon HD 7790 with an average score of 17666 and a delta of -0.2%, the AMD Radeon 780M with an average score of 17588 and a delta of 0.3%, the AMD Radeon Pro 560 with an average score of 17551 and a delta of 0.5%, and the AMD Radeon Pro 460 with an average score of 17509 and a delta of 0.7%. These GPUs are all within 1% of the RTX 4060’s average benchmark score of 17639, so swapping to any of them would produce similar frame rates in Doom, given the same CPU and settings. However, none of these rivals match the RTX 4060’s modern feature set, such as its Ada Lovelace architecture and 15.11 TFLOPS FP32 performance, but the benchmark data suggests the in-game results would be comparable.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS on average is Medium, with an average FPS of 70. The Low preset also clears the threshold at 80 FPS, but Medium offers higher visual quality while still averaging 70 FPS. The minimum FPS for Medium at 4K is 59, which dips below the threshold, but the average remains above it.

At 2560x1440, the best preset is Ultra, with an average FPS of 89. This is the highest quality setting available, and it clears the 60 FPS threshold by a significant margin. The minimum FPS for Medium at 1440p is 109, and for Ultra there is no recorded minimum, but the average of 89 FPS indicates consistent performance above the threshold.

At 1920x1080, the best preset is also Ultra, with an average FPS of 137. This is the maximum quality setting, and it runs at more than double the 60 FPS threshold. For players seeking the highest frame rates, the Low preset at 1080p averages 228 FPS, but Ultra provides the best visual experience while maintaining a high frame rate.

CPU and GPU Roles

The data shows that the GPU becomes the primary bottleneck at higher resolutions, while the CPU handles the game’s workload well at lower presets. Comparing the scaling from 1080p to 1440p, the average FPS for the Low preset drops from 228 to 147, a 35% reduction. For the Ultra preset, the drop is from 137 to 89, also a 35% reduction. This consistent scaling across presets indicates that the GPU is the limiting factor at 1440p, as the CPU’s performance remains adequate.

From 1440p to 4K, the scaling becomes more severe. The Low preset drops from 147 to 80 FPS, a 45% reduction, and the Ultra preset drops from 89 to 48 FPS, a 46% reduction. This larger drop at 4K suggests that the RTX 4060’s memory bandwidth and capacity are insufficient for the higher resolution, especially at Ultra settings. The CPU’s role is less significant here, as its benchmark scores, such as the 13593 in Cinebench R23 multi-core, are not the limiting factor.

At 1080p, the CPU and GPU work in balance. The 1920x1080 Ultra preset averages 137 FPS, which is high but not maxed out, indicating the CPU has headroom. The CPU’s single-thread performance, with a 3dmark single-thread score of 726, is sufficient for Doom’s engine, and the GPU handles the rendering load. The frame rate differences between presets at 1080p are large, from 228 FPS on Low to 137 FPS on Ultra, showing that the GPU is the primary driver of performance scaling. However, at 4K, the GPU’s limitations become apparent, and the CPU’s performance becomes less relevant to the final frame rate. Overall, the GPU is the dominant factor across all resolutions, but the CPU provides enough headroom to avoid bottlenecking at 1080p and 1440p.