Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Doom
FPS 2016

Doom

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
202 FPS
Ultra 1080p Measured
122 FPS

1440p (2K / QHD)

Low 1440p Measured
131 FPS
Ultra 1440p Measured
79 FPS

4K (Ultra HD)

Low 4K Measured
71 FPS
Ultra 4K Measured
43 FPS
6.7ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,500
Your CPU 21,484
Graphics Card
Required 27,325
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 43 52 62 71
1440p QHD 79 96 114 131
1080p Full HD 122 149 176 202

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 149
1920x1080 Low 202
1920x1080 Medium 176
1920x1080 Ultra 122
2560x1440 High 96
2560x1440 Low 131
2560x1440 Medium 114
2560x1440 Ultra 79
3840x2160 High 52
3840x2160 Low 71
3840x2160 Medium 62
3840x2160 Ultra 43

Performance Analysis: Doom on Your System

The AMD Ryzen 5 2600 paired with the NVIDIA GeForce RTX 5050 delivers a highly capable Doom experience across all tested resolutions, with the data showing that 1080p and 1440p are fully playable at maximum settings. At 4K, the combo requires a slight settings reduction to maintain smooth frame rates. The recorded measurements indicate that this pairing is well balanced for this title, with the GPU becoming the primary limiting factor only at the highest resolution.

Measured FPS Breakdown

At 1920x1080, the RTX 5050 with the Ryzen 5 2600 produces exceptional frame rates. With Low settings, the average FPS reaches 202, providing a very high refresh rate experience. Moving to Medium settings, the average drops to 176 FPS, with a minimum of 150 FPS and a maximum of 203 FPS. High settings yield an average of 149 FPS, while Ultra settings still maintain a robust 122 FPS average. All of these figures are far above the 60 FPS playable threshold, and even the lower-bound measurements at Medium settings (150 FPS minimum) are more than double the playability standard.

At 2560x1440, performance remains strong. Low settings deliver an average of 131 FPS. Medium settings record an average of 114 FPS, with minimum and maximum values of 97 and 131 FPS respectively. High settings produce a 96 FPS average, and Ultra settings maintain a 79 FPS average. The data shows that every preset at this resolution stays comfortably above the 60 FPS threshold, with the most demanding setting (Ultra) still offering nearly a third more performance than the minimum playable level.

At 3840x2160, the performance picture changes noticeably. Low settings produce an average of 71 FPS, which remains playable. Medium settings average 62 FPS, with a minimum of 52 FPS and a maximum of 71 FPS. This places the average right at the edge of the playable threshold, though the minimum dips below it. High settings drop to a 52 FPS average, and Ultra settings fall to 43 FPS, both of which are below the 60 FPS playable standard. The recorded data clearly shows that 4K requires either Low or Medium settings to remain in playable territory, with Medium being the highest preset that maintains an average at or above 60 FPS.

The scaling between resolutions follows a consistent pattern. From 1080p to 1440p, the average FPS drops by roughly 26 to 35 percent depending on the preset. From 1440p to 4K, the drop is steeper, ranging from approximately 35 to 46 percent. This indicates that the GPU is increasingly stressed as pixel count rises, which is typical for a modern title like Doom.

Similar Performance Alternatives

Looking at the CPU side, the AMD Ryzen 5 2600 sits in a tight performance cluster according to the database. Its average benchmark score is 21484, which places it at the 75th percentile among all tested CPUs. The nearest rivals show very small deltas. The Intel Core Ultra 5 228V scores 21440, which is just 0.2 percent lower. The Intel Core i9-11900H scores 21367, 0.5 percent below. The Intel Xeon D-1746TER scores 21635, coming in 0.7 percent higher. The AMD EPYC 9454 scores 21223, which is 1.2 percent lower. These differences are minimal, meaning that swapping the Ryzen 5 2600 for any of these alternatives would result in nearly identical CPU-bound behavior in Doom. None of these rivals would meaningfully change the measured FPS in this game, as the performance gap is within a couple of percentage points at most.

On the GPU side, the NVIDIA GeForce RTX 5050 has an average benchmark score of 21035, placing it at the 66th percentile among all GPUs. Its nearest rivals include the AMD Radeon RX Vega M GL with a score of 21153, which is 0.6 percent higher. The AMD Radeon HD 8970M scores 21237, 1 percent higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6 percent lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6 percent higher. Again, these deltas are very small, all within roughly 1.6 percent of the RTX 5050. In practice, any of these GPUs would deliver nearly the same frame rates in Doom at the tested settings and resolutions. The data suggests that the RTX 5050 is not an outlier; it performs in a tight band alongside these alternatives.

For the full combo, the CPU and GPU both sit near several close competitors. A system using the Ryzen 5 2600 with an RX 5600 XT, for example, would perform within about 1.6 percent of this tested configuration on the GPU side and within 0.2 percent on the CPU side. The overall gameplay experience would be essentially indistinguishable from the recorded numbers.

CPU and GPU Roles

The data reveals how the division of labor shifts between the CPU and GPU across resolutions. At 1920x1080, the frame rates are very high across all settings, ranging from 122 FPS at Ultra to 202 FPS at Low. The gap between Low and Ultra is 80 FPS, which is a substantial difference. This suggests that at 1080p, the GPU is still the main driver of performance, since lowering settings produces large gains. However, the CPU is not a bottleneck at these frame rates, as even the most demanding preset stays above 120 FPS.

At 2560x1440, the pattern is similar but with lower absolute numbers. The spread from Low (131 FPS) to Ultra (79 FPS) is 52 FPS. The GPU continues to dominate the performance equation, as each settings reduction yields a meaningful FPS increase. The CPU, with its 6 cores and 12 threads, is sufficient to feed the GPU at these levels.

At 3840x2160, the GPU becomes the clear limiting factor. The average FPS at Ultra is 43, at High it is 52, at Medium it is 62, and at Low it is 71. The scaling from Low to Ultra is a 28 FPS drop, and even Low settings only reach 71 FPS. This indicates that the RTX 5050 is heavily loaded at 4K, and the CPU has spare capacity. The Ryzen 5 2600 is not holding back performance at this resolution; the GPU is the bottleneck. Evidence for this comes from the fact that dropping settings from Medium to Low at 4K only improves the average from 62 to 71 FPS, a 9 FPS gain, while at 1080p the same settings change yields a 26 FPS gain (176 to 202). The GPU is saturated at 4K, so it cannot translate settings reductions into proportionally large FPS increases.

The verdict data reinforces this. At 4K, only Low and Medium settings are playable, with Medium being the best at 62 FPS. At 1440p and 1080p, all four presets are playable, with Ultra being the best at 79 and 122 FPS respectively. This progression shows that the CPU is adequate for all tested configurations, and the GPU dictates the playability ceiling. The Ryzen 5 2600, with its 16 MB of shared L3 cache and dual-channel DDR4 memory, provides enough throughput for Doom’s engine at these settings.

How This Combo Ranks

In the database’s overall ranking for Doom, this specific combination of the AMD Ryzen 5 2600 and NVIDIA GeForce RTX 5050 ranks 2281 out of 3712 tested combos. This places it in the upper-middle portion of the field, just past the 61st percentile mark (calculated from the rank and total). The rank reflects that while this combo delivers playable performance at 1080p and 1440p with headroom, it does not reach the top tier of systems that can max out 4K or push extreme refresh rates.

The ranking is influenced by the fact that the RTX 5050 is a solid mid-range GPU, but it is not a high-end part. At 4K, it falls below 60 FPS on High and Ultra settings, which excludes it from the top ranks where cards can handle 4K Ultra. At 1080p and 1440p, however, the combo performs very well, with Ultra settings at 1440p hitting 79 FPS and at 1080p hitting 122 FPS. The rank of 2281 out of 3712 means that roughly 1431 other combos outperform it, but it also means that about 2280 combos rank lower. This is a respectable position for a mid-range CPU from 2018 paired with a newer mid-range GPU.

The percentile data for the individual components supports this. The CPU is at the 75th percentile among all CPUs, indicating it is better than most. The GPU is at the 66th percentile among all GPUs. Combining a 75th percentile CPU with a 66th percentile GPU yields a system that is capable but not top-tier, which aligns with the 2281 rank. The rank is not a reflection of poor performance; it is simply that many other tested combos use higher-end GPUs that push 4K Ultra above 60 FPS.

FAQ

Q: What is the best settings preset for 1080p with this combo?

A: The best settings at 1920x1080 is Ultra, which achieves an average of 122 FPS. All presets are playable at this resolution, but Ultra offers the highest visual quality while staying far above the 60 FPS threshold.

Q: Can this system handle 4K gaming in Doom?

A: Yes, but with limitations. At 3840x2160, only Low and Medium settings are playable. Medium is the highest playable preset, averaging 62 FPS, though the minimum recorded FPS is 52. High and Ultra settings fall to 52 and 43 FPS respectively, which are below the playable threshold.

Q: How does the RTX 5050 compare to the AMD Radeon RX 5600 XT?

A: The RTX 5050 has an average benchmark score of 21035, while the RX 5600 XT scores 20713. This puts the RTX 5050 approximately 1.6 percent higher. In Doom, the frame rates would be very close, within a couple of FPS at most settings.

Q: Is the Ryzen 5 2600 a bottleneck at 1440p?

A: The data does not indicate a CPU bottleneck at 1440p. The highest preset, Ultra, averages 79 FPS, and the scaling from Low to Ultra is consistent. The CPU’s benchmark score is at the 75th percentile, and it has enough headroom to feed the GPU at this resolution.

Q: What is the minimum FPS at Medium settings in 4K?

A: At 3840x2160 with Medium settings, the minimum FPS is 52, the average is 62, and the maximum is 71. The minimum dips below the 60 FPS threshold, but the average stays playable.

Q: How does this combo rank among all tested systems in Doom?

A: This combo ranks 2281 out of 3712 tested combinations. This places it in the upper-middle range, indicating that it outperforms a majority of systems but is not among the top performers that can max out 4K.

Best Settings per Resolution

At 1920x1080, the most demanding preset that remains at or above 60 FPS is Ultra, which delivers an average of 122 FPS. This is the recommended setting for this resolution, as it provides the highest visual fidelity while maintaining a frame rate that is more than double the playable threshold. The minimum FPS at Ultra is not recorded, but the average is high enough to ensure a smooth experience.

At 2560x1440, the best settings is also Ultra, with an average of 79 FPS. This remains well above 60 FPS, and the data shows that all presets are playable at this resolution. Ultra provides the best image quality without sacrificing playability.

At 3840x2160, the best settings is Medium, which averages 62 FPS. This is the highest preset that stays at or above the 60 FPS average. Low settings also work at 71 FPS, but Medium offers better visual quality while still meeting the playability standard. High and Ultra settings are not recommended at 4K, as they drop to 52 and 43 FPS respectively.

The summary from the database confirms these choices: the playable settings at 4K are Low and Medium, with Medium being the best at 62 FPS. At 1440p, all settings are playable, with Ultra being the best at 79 FPS. At 1080p, all settings are playable, with Ultra being the best at 122 FPS. For users with a 144Hz or 165Hz monitor at 1080p, the Low preset at 202 FPS or Medium at 176 FPS would be preferable to maximize refresh rate, but for standard 60Hz displays, Ultra is the optimal choice. At 1440p, Ultra at 79 FPS is suitable for 60Hz displays, and users with higher refresh monitors could drop to High at 96 FPS or Medium at 114 FPS for smoother motion. The data provides clear guidance: this combo can handle Doom at high settings for most users, with 4K requiring a compromise to Medium presets.