Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 42 | 47 | 66 |
| 1440p QHD | 54 | 62 | 70 | 98 |
| 1080p Full HD | 71 | 82 | 92 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
Control is a demanding action-adventure title that stresses both the CPU and GPU, and this particular pairing of an Intel Core Ultra 9 290K Plus with an NVIDIA GeForce RTX 2070 SUPER produces a wide spread of results depending on the resolution and quality preset chosen. The recorded data shows that the combo ranks 2152 out of 3720 tested combinations, placing it in the lower-middle portion of the database’s tested pool. That ranking reflects a GPU that is solidly mid-range by current standards while the CPU is near the top of the charts, so the final experience in Control is almost entirely dictated by the graphics card’s capabilities. The measured FPS values across 1080p, 1440p, and 4K make it clear that this system can handle the game at 60 FPS or above, but only if the user selects the appropriate settings for their display resolution.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 66 FPS. The data shows that Medium drops to 47 FPS average, High falls to 42 FPS, and Ultra is even lower at 36 FPS. For a 4K display, the user should stick with Low to maintain a smooth experience, as the GPU simply does not have enough headroom for higher quality settings at this pixel count. The 66 FPS average at Low is above the 60 FPS threshold, but it is not a large margin, so any heavy scene could bring the frame rate closer to the boundary.
At 2560x1440, the best settings that remain at or above 60 FPS are High, with an average of 62 FPS. This is a much more reasonable situation than 4K, because the user can enjoy a high-quality visual experience while still staying above the playable threshold. Medium runs at 70 FPS average, which is smoother, but High is the highest preset that still qualifies. Low runs at 98 FPS average, which is the fastest option at this resolution, but High offers the best balance of visual fidelity and performance. Ultra drops below 60 FPS with an average of 54 FPS, so it is not recommended for a 1440p display if the goal is consistent playability.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 71 FPS. This is the only resolution where the full quality range is available, and the system can handle even the heaviest preset without falling below the threshold. High runs at 82 FPS average, Medium at 92 FPS, and Low at 130 FPS, so there is plenty of headroom at 1080p. Users with a 144Hz or higher refresh rate monitor may want to drop to Medium or Low to push frame rates higher, but for a standard 60 Hz display, Ultra is the recommended choice.
How This Combo Ranks
The combo rank of 2152 out of 3720 tested combinations places this system in the 57th percentile of the database’s tested pool, meaning roughly 43 percent of tested combos perform better in Control. This is not a top-tier result, but it is not a weak one either. The bottleneck is clearly the GPU, as the CPU is far more powerful than what this game requires at most settings. The RTX 2070 SUPER sits at the 65th percentile among all GPUs in the database, while the Core Ultra 9 290K Plus sits at the 96th percentile among all CPUs. That disparity explains why the combo rank is lower than the CPU’s individual standing: the graphics card holds the system back in a graphically intensive title like Control.
In practical terms, this combo is best suited for 1080p and 1440p gaming, where it can deliver 60 FPS or higher at respectable settings. At 4K, it is only playable on Low, which is a significant limitation. The ranking suggests that users with this CPU who want better 4K performance would need a much stronger GPU, but as configured, the system is a capable 1080p and 1440p machine.
Measured FPS Breakdown
The recorded FPS measurements provide a complete picture of how this combo behaves across all tested settings. At 1920x1080, Low produces an average of 130 FPS, Medium produces 92 FPS with a minimum of 78 and a maximum of 106, High produces 82 FPS, and Ultra produces 71 FPS. The minimum and maximum values are only recorded for Medium at this resolution, with the 78 FPS minimum still well above the 60 FPS threshold. The spread between Low and Ultra is 59 FPS, which shows that the GPU has a significant impact on performance even at 1080p, though the CPU is clearly not a limiting factor at this resolution.
At 2560x1440, Low produces an average of 98 FPS, Medium produces 70 FPS with a minimum of 59 and a maximum of 80, High produces 62 FPS, and Ultra produces 54 FPS. The Medium minimum of 59 FPS is just barely below the 60 FPS threshold, which means that even though the average is above 60, there can be brief dips below the playable line. This is worth noting for users who are sensitive to frame pacing. High at 62 FPS average is above the threshold, but the margin is small, so users who want a more consistent experience may prefer Medium despite the slightly lower average.
At 3840x2160, Low produces an average of 66 FPS, Medium produces 47 FPS with a minimum of 40 and a maximum of 54, High produces 42 FPS, and Ultra produces 36 FPS. The Medium minimum of 40 FPS shows a very wide frame time variance, which would be noticeable as stuttering in fast-paced combat. Low is the only playable option at 4K, and even then, the 66 FPS average does not leave much room for demanding scenes. The data makes it clear that 4K is not this combo’s strong suit.
Similar Performance Alternatives
Looking at the nearest rivals in the database for the CPU, the Intel Core Ultra 9 285K has an average benchmark score that is 0.2 percent lower than the 290K Plus, making it effectively identical in performance for this game. The AMD EPYC 4584PX is 1.1 percent behind, the AMD EPYC 9135 is 1.2 percent behind, and the AMD EPYC 7F72 is 1.3 percent ahead. These differences are all within a couple of percentage points, so any of these CPUs would produce nearly the same frame rates in Control when paired with the same GPU. The practical takeaway is that the CPU choice matters very little here, since all of these processors are far more powerful than the RTX 2070 SUPER needs.
For the GPU, the nearest rivals are the NVIDIA Quadro M4000M, which is 1 percent slower, the NVIDIA GeForce RTX 3070 Mobile, which is 1.2 percent slower, the Intel Arc B570, which is 1.3 percent slower, and the Intel Arc A750, which is 1.5 percent slower. These deltas are small, meaning that a user with any of these GPUs paired with a similarly strong CPU would see nearly identical performance in Control. The RTX 3070 Mobile being slightly slower than the desktop RTX 2070 SUPER is a useful data point, as it shows that mobile variants of newer cards do not necessarily outperform an older desktop card. The Intel Arc options are also very close in performance, which is notable for users considering a budget-friendly upgrade path.
CPU and GPU Roles
The data shows that the GPU is the dominant factor in Control for this combo, especially at higher resolutions. At 1080p, the frame rate drops from 130 FPS on Low to 71 FPS on Ultra, a 45 percent reduction that is almost entirely due to the graphics card’s workload. The CPU’s role at 1080p is to keep up with the GPU, and the Core Ultra 9 290K Plus does so easily, as evidenced by the high frame rates even at Low settings. If the CPU were the bottleneck, the frame rate would not scale as dramatically with preset changes.
At 1440p, the GPU workload increases further, and the frame rate drops from 98 FPS on Low to 54 FPS on Ultra. The scaling from 1080p to 1440p is also informative: at the same preset, the frame rate drops by about 25 percent when moving from 1080p to 1440p. This is a typical GPU-bound scaling pattern. At 4K, the GPU is even more stressed, with Low producing 66 FPS and Ultra producing 36 FPS. The 4K results show that the RTX 2070 SUPER is simply not powerful enough for high-quality settings at this resolution, regardless of how capable the CPU is.
The CPU’s performance in this game is effectively a non-issue. The Core Ultra 9 290K Plus has a passmark multithread score of 60860 and a passmark single-thread score of 4823, both of which are far beyond what Control requires. Even the most demanding scenes in the game, which involve physics-heavy combat and destructible environments, would not come close to maxing out this processor. The database’s measured FPS values confirm this: the frame rates are consistently limited by the GPU at every resolution and preset combination. Users who are considering this CPU for Control should know that the GPU is the component to upgrade if they want higher frame rates or higher quality settings.
FAQ
Q: Can this combo run Control at 60 FPS on a 4K monitor?
A: Yes, but only on Low settings. The measured average FPS at 3840x2160 on Low is 66 FPS, which is above the 60 FPS threshold. Medium, High, and Ultra all fall below 60 FPS, with averages of 47, 42, and 36 FPS respectively.
Q: What is the best quality preset at 1440p for this system?
A: High is the best preset that stays at or above 60 FPS, with an average of 62 FPS. Medium runs at 70 FPS average and Low at 98 FPS, but High offers the highest visual quality while still meeting the playable threshold.
Q: Is the CPU or GPU the limiting factor in this game?
A: The GPU is the limiting factor. The Core Ultra 9 290K Plus ranks at the 96th percentile among CPUs, while the RTX 2070 SUPER ranks at the 65th percentile among GPUs. The frame rate scaling across resolutions and settings follows a GPU-bound pattern.
Q: How does this combo compare to other tested systems?
A: It ranks 2152 out of 3720 tested combos, placing it in the lower-middle portion of the database. The high CPU performance is offset by the mid-range GPU, which holds the system back in a graphically intensive game like Control.
Q: What happens if I use Ultra settings at 1080p?
A: Ultra at 1920x1080 produces an average of 71 FPS, which is above the 60 FPS threshold. This is the highest preset that remains playable at 1080p. Lower presets provide higher frame rates, with Low reaching 130 FPS average.
Q: Are there any settings where the frame rate drops below 60 FPS?
A: Yes, at 4K on Medium, High, and Ultra, with averages of 47, 42, and 36 FPS. At 1440p on Ultra, the average is 54 FPS. At 1440p on Medium, the minimum recorded FPS is 59, which is just below the threshold even though the average is 70 FPS.