Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
192 FPS
Ultra 1080p Measured
105 FPS

1440p (2K / QHD)

Low 1440p Measured
145 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
98 FPS
Ultra 4K Measured
54 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 70,163
Graphics Card
Required 27,787
Your GPU 41,187

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 62 70 98
1440p QHD 80 92 103 145
1080p Full HD 105 121 136 192

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 192
1920x1080 Medium 136
1920x1080 Ultra 105
2560x1440 High 92
2560x1440 Low 145
2560x1440 Medium 103
2560x1440 Ultra 80
3840x2160 High 62
3840x2160 Low 98
3840x2160 Medium 70
3840x2160 Ultra 54

Performance Analysis: Control on Your System

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 3080 Ti is a formidable combination for Control, a 2019 Action Adventure title. The benchmark data shows this system handles the game with significant headroom at most settings, though the most demanding preset at 4K pushes the hardware to its limits. The RTX 3080 Ti sits in the 83rd percentile among all GPUs, while the i7-14700KF ranks in the 94th percentile for CPUs, indicating a balanced pairing where neither component is a glaring bottleneck for this title. The measured frame rates across resolutions and presets provide a clear picture of what to expect.

Measured FPS Breakdown

The dataset provides average frame rates for four settings presets (Low, Medium, High, Ultra) across three resolutions. It is important to note that min and max values are only provided for the Medium preset at each resolution.

At 1920x1080, the system delivers exceptionally high frame rates. The Low preset averages 192 FPS. Stepping up to Medium yields an average of 136 FPS, with a minimum of 116 FPS and a maximum of 157 FPS. The High preset drops the average to 121 FPS. The most demanding Ultra preset still manages a strong 105 FPS average. This resolution is clearly well within the system's comfort zone, with even the heaviest settings providing a buttery-smooth experience far above the 60 FPS threshold.

Moving to 2560x1440, performance remains very strong. The Low preset averages 145 FPS. The Medium preset averages 103 FPS, with a recorded minimum of 88 FPS and a maximum of 118 FPS, showing consistent frame pacing. High settings produce an average of 92 FPS. The Ultra preset maintains an average of 80 FPS. Even at 1440p with all settings maxed, the system keeps frame rates well above the playable threshold, making this a prime resolution for high-refresh-rate monitors.

At 3840x2160, the pressure on the GPU becomes evident. The Low preset produces an average of 98 FPS. The Medium preset sees the average drop to 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. High settings lower the average to 62 FPS. The Ultra preset is the only configuration that falls below the 60 FPS playable threshold, with an average of 54 FPS. The data indicates 4K gaming is viable but requires a choice between near-maximum visual quality and a solid frame rate.

Similar Performance Alternatives

The nearestRivals data provides context for how this specific CPU and GPU stack against other hardware in synthetic benchmarks.

For the Intel Core i7-14700KF, the closest competitor is the AMD Ryzen 7 9700F, which has an average score 0.2% lower. The AMD Ryzen 9 7940HX scores 0.4% lower, and the AMD Ryzen 9 7950X scores 0.9% lower. On the other side, the Intel Core Ultra 7 265K scores 1% higher. In practical terms for gaming, these deltas are negligible; a system built with any of these CPUs would deliver a nearly identical experience in Control, meaning the choice between them would be dictated by other platform features rather than raw gaming performance.

For the NVIDIA GeForce RTX 3080 Ti, the situation is slightly different. The AMD Radeon Pro 5300 has an average score 0.8% lower, while the NVIDIA GeForce RTX 5070 scores 2% higher. Interestingly, the NVIDIA Tesla M40 24 GB and the NVIDIA Tesla M40 score 1.2% and 1.7% higher, respectively. These Tesla cards are compute-oriented, but the benchmark data suggests their raw rasterization scores are in the same ballpark. For gaming, the RTX 3080 Ti and the RTX 5070 would likely produce very similar frame rates in Control, with the RTX 5070 having a slight edge based on the deltaPct value.

CPU and GPU Roles

The data suggests that the GPU is the primary limiting factor at higher resolutions, while the CPU has ample headroom. This is typical for a game like Control, which is demanding on graphics hardware.

The scaling from 1080p to 1440p is significant. For instance, the High preset drops from 121 FPS at 1080p to 92 FPS at 1440p, a reduction of 29 FPS. This shows a clear performance cost as the pixel count increases. The drop from 1440p to 4K is even more drastic. The High preset at 1440p yields 92 FPS, but at 4K it falls to 62 FPS. This 30 FPS drop indicates that the RTX 3080 Ti is working much harder at 4K, and the GPU becomes the dominant factor in determining performance.

The CPU's role is more apparent in the gap between the Low and Ultra presets. At 1080p, the difference between Low (192 FPS) and Ultra (105 FPS) is 87 FPS. This gap narrows at 4K, where Low (98 FPS) and Ultra (54 FPS) differ by 44 FPS. The fact that the gap narrows at higher resolutions indicates that the GPU is becoming saturated, and the CPU has less impact on the final frame rate. The i7-14700KF's high multi-core score (44167 in Cinebench R23) ensures it won't be a bottleneck, but the data shows the RTX 3080 Ti's workload is what dictates the experience at 4K.

The Verdict

Yes, this PC can run Control effectively, but the experience depends heavily on the chosen resolution and settings.

According to the verdictByResolution data, at 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the best settings being Ultra at 105 FPS. At 2560x1440, all four presets are also playable, with Ultra being the best at 80 FPS. This makes 1440p the sweet spot for this combination, offering a high visual fidelity preset with a comfortable margin above the 60 FPS threshold.

At 3840x2160, the situation changes. The playable settings are High, Low, and Medium. The best playable setting is High, which achieves an average of 62 FPS. The Ultra preset drops to 54 FPS, which is below the 60 FPS playable threshold. Therefore, for a 4K display, you must select High settings or lower to maintain a playable frame rate.

Best Settings per Resolution

The goal is to find the most demanding preset that still stays at or above 60 FPS at each resolution.

  • 1920x1080: The most demanding preset available is Ultra, which achieves an average of 105 FPS.
  • 2560x1440: The most demanding preset available is Ultra, which achieves an average of 80 FPS.
  • 3840x2160: The most demanding preset that clears the 60 FPS threshold is High, achieving an average of 62 FPS.

For 1080p and 1440p users, there is no compromise needed; you can enable the highest quality settings. For 4K users, the choice is between High settings for a locked 60 FPS experience or Ultra settings for marginally lower performance.

FAQ

Q: Can the system run Control at 4K with Ultra settings?

A: No. The measured average FPS at 3840x2160 with Ultra settings is 54 FPS, which falls below the 60 FPS playable threshold. The best playable 4K setting is High, which averages 62 FPS.

Q: What is the best quality setting for 1440p?

A: The Ultra preset is the most demanding and remains playable, achieving an average of 80 FPS at 2560x1440. All other presets (High, Medium, Low) also clear the 60 FPS threshold.

Q: How much performance is lost when moving from 1080p to 4K on High settings?

A: The average frame rate drops from 121 FPS at 1920x1080 to 62 FPS at 3840x2160 on High settings, a reduction of 59 FPS.

Q: Is the CPU or GPU the bottleneck at 4K?

A: The GPU is the primary limiting factor at 4K. The performance gap between Low and Ultra presets narrows from 87 FPS at 1080p to 44 FPS at 4K, indicating the GPU is saturated and the CPU's influence on frame rates diminishes.

Q: Does the system ever drop below 60 FPS at 1440p?

A: No. The lowest average FPS at 2560x1440 across all presets is 80 FPS (Ultra). The Medium preset shows a minimum observed frame rate of 88 FPS, so all settings maintain a comfortable margin above 60 FPS.

Q: How does the RTX 3080 Ti compare to a modern GPU like the RTX 5070 in this game?

A: Based on synthetic benchmark scores, the RTX 5070 has a 2% higher average score than the RTX 3080 Ti. In practice, this suggests the RTX 5070 would deliver a very similar, marginally higher frame rate in Control.