Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 31 | 35 | 49 |
| 1440p QHD | 40 | 46 | 52 | 73 |
| 1080p Full HD | 53 | 61 | 69 | 97 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
Measured FPS Breakdown
The recorded data for Control on the Intel Core i7-12700KF with the NVIDIA GeForce GTX 1070 shows a clear performance gradient as resolution and settings scale. At 1920x1080, the lowest resolution tested, the combination delivers playable frame rates across most presets. Low settings produce an average of 97 FPS, Medium averages 69 FPS with a minimum of 58 FPS and a maximum of 79 FPS, and High averages 61 FPS. Ultra drops to an average of 53 FPS, which falls below the 60 FPS playable threshold.
Moving to 2560x1440, the performance declines noticeably. Low settings average 73 FPS, which remains above the 60 FPS mark. Medium averages 52 FPS with a minimum of 44 FPS and a maximum of 60 FPS, placing it just under the playable threshold. High averages 46 FPS, and Ultra averages 40 FPS. Neither High nor Ultra maintains a consistent 60 FPS experience at this resolution.
At 3840x2160, the GTX 1070 struggles to keep up with Control's demands. Low settings average 49 FPS, Medium averages 35 FPS with a minimum of 30 FPS and a maximum of 40 FPS, High averages 31 FPS, and Ultra averages 27 FPS. None of the presets at 4K reach the 60 FPS playable threshold, and even the lowest preset falls short of that mark by a significant margin.
The min and max FPS data available for Medium settings at each resolution provides additional context. At 1080p Medium, the frame rate fluctuates between 58 and 79 FPS, indicating a relatively stable experience with occasional dips near the threshold. At 1440p Medium, the range is 44 to 60 FPS, showing more pronounced dips that push the experience below playable levels at times. At 4K Medium, the range narrows to 30 to 40 FPS, reflecting a consistently low frame rate with little headroom.
For the other presets, only average FPS values are recorded. This means the data for Low, High, and Ultra at each resolution represents the mean performance, not the extremes. The averages still give a clear picture: 1080p is the only resolution where High settings clear 60 FPS, and even then only by a single frame per second on average.
FAQ
Q: Can this PC run Control at 1080p with High settings?
A: Yes. The recorded average FPS for 1920x1080 High is 61 FPS, which clears the 60 FPS playable threshold. This is the most demanding preset that remains playable at this resolution.
Q: What is the best settings preset for 1440p?
A: Low is the only playable option at 2560x1440, averaging 73 FPS. Medium averages 52 FPS, which falls below the 60 FPS threshold, so it is not considered playable according to the database's criteria.
Q: Is 4K playable with this combination?
A: No. At 3840x2160, even the lowest preset averages 49 FPS, which is below the 60 FPS playable threshold. Ultra averages 27 FPS, High averages 31 FPS, and Medium averages 35 FPS.
Q: How does the GTX 1070 compare to its nearest rivals in synthetic benchmarks?
A: The GTX 1070 has an average benchmark score of 9780. Its closest rival, the AMD FirePro W5000, scores 9803, which is 0.2% higher. The NVIDIA Quadro M2000M scores 9832, 0.5% higher, while the NVIDIA Tesla M10 scores 9724, 0.6% lower, and the NVIDIA Tesla C2070 scores 9716, 0.7% lower.
Q: What frame rates can be expected at 1080p Low?
A: The average FPS for 1920x1080 Low is 97 FPS. This is the highest average recorded across all tested resolutions and settings for this combination.
Q: Does the CPU hold back the GPU in this game?
A: The data shows scaling that is typical of a GPU-bound title. At 1080p, the frame rate drops from 97 FPS at Low to 61 FPS at High, a 36 FPS reduction. At 1440p, the drop from Low to High is 27 FPS, and at 4K it is 18 FPS. This pattern indicates the GTX 1070 becomes the limiting factor as resolution increases, while the i7-12700KF has ample headroom.
CPU and GPU Roles
The division of labor between the Intel Core i7-12700KF and the NVIDIA GeForce GTX 1070 in Control is heavily skewed toward the GPU. The CPU is a 12-core, 20-thread processor from the Alder Lake architecture, with a boost clock of 5.00 GHz and a 25 MB shared L3 cache. Its synthetic benchmark scores place it in the 85th percentile of all CPUs, with an average benchmark score of 35365. The nearest rivals, the Intel Core i7-13700T and Intel Core 5 213PE, score within 0.2% of the i7-12700KF, showing this processor is competitive with newer low-power parts.
The GTX 1070, by contrast, sits in the 47th percentile of all GPUs, with an average benchmark score of 9780. Its nearest rivals are professional and older workstation cards, such as the AMD FirePro W5000 and NVIDIA Quadro M2000M, all within 0.7% of its score. This places the GPU firmly in the midrange tier, and Control's demands quickly expose its limitations.
The scaling between resolutions confirms the GPU is the primary constraint. At 1920x1080, the difference between Low and Ultra is 44 FPS (97 to 53). At 2560x1440, the same comparison shows a 33 FPS gap (73 to 40). At 3840x2160, the gap narrows to 22 FPS (49 to 27). This diminishing delta as resolution increases is the classic signature of a GPU-bound scenario: the GPU is already saturated at lower resolutions, and raising the resolution reduces the average FPS across the board without changing the relative ordering of presets.
The CPU's role becomes more apparent at lower resolutions where frame rates are higher. At 1080p Low, the average of 97 FPS requires the CPU to feed frames quickly enough to keep the GPU busy. The i7-12700KF, with its strong single-thread performance (a 3dmark_single_thread score of 1043 and a cinebench R23 single-core score of 4071), is more than capable of this task. The data shows no anomalous dips at 1080p that would indicate CPU bottlenecks, such as minimum frame rates collapsing relative to averages.
At 1440p and 4K, the CPU's advantage becomes irrelevant because the GPU cannot maintain high frame rates regardless of settings. The average FPS at 4K Ultra is 27, which is below what even a modest CPU would struggle to feed. In short, the i7-12700KF provides a solid foundation, but the GTX 1070 determines the playability ceiling in Control.
The Verdict
The database's playable threshold is 60 FPS, and the verdict is clear: this combination is playable at 1920x1080 and 2560x1440, but not at 3840x2160.
At 1920x1080, the playable settings are High, Low, and Medium. High averages 61 FPS, Low averages 97 FPS, and Medium averages 69 FPS. The best playable setting is High, with an average of 61 FPS. Ultra at 1080p averages 53 FPS, which misses the threshold.
At 2560x1440, only Low is playable, averaging 73 FPS. Medium averages 52 FPS, High averages 46 FPS, and Ultra averages 40 FPS, all below 60 FPS.
At 3840x2160, no settings are playable. Low averages 49 FPS, Medium averages 35 FPS, High averages 31 FPS, and Ultra averages 27 FPS. Every preset falls short of the 60 FPS threshold.
For a 60 FPS target, 1080p is the sweet spot. The 1440p Low preset offers a playable experience, but it requires sacrificing visual quality. 4K is not viable for this combination, even at the lowest settings.
Best Settings per Resolution
For each resolution, the most demanding preset that stays at or above 60 FPS is as follows:
- 1920x1080: High settings, with an average of 61 FPS. This is the highest quality preset that clears the threshold by a narrow margin. Medium averages 69 FPS and Low averages 97 FPS, but High provides the best visual fidelity while remaining playable.
- 2560x1440: Low settings, with an average of 73 FPS. This is the only playable preset at 1440p. Medium averages 52 FPS, which is 8 FPS below the threshold, so Low is the recommended choice for a smooth experience.
- 3840x2160: No preset is playable. The closest option is Low at 49 FPS, but it does not meet the 60 FPS requirement.
The 1080p High preset is the recommended target for users who want a balance of quality and performance. The 1440p Low preset offers a playable experience, but the visual downgrade is substantial compared to 1080p High. Users with 4K displays should consider lowering the resolution or upgrading the GPU, as no settings adjustment can bring the frame rate up to 60 FPS.
How This Combo Ranks
In the database's ranking of tested combinations for Control, this pairing of the Intel Core i7-12700KF and NVIDIA GeForce GTX 1070 ranks 3083 out of 3720 combos. This places it in the lower 17% of all tested configurations, a reflection of the GTX 1070's age and midrange positioning.
The CPU itself is strong, ranking in the 85th percentile among all CPUs in the database. Its average benchmark score of 35365 is nearly identical to the Intel Core i7-13700T (35403, 0.1% higher) and the Intel Core 5 213PE (35428, 0.2% higher), and it slightly edges out the Intel Core i5-13600T (35305, 0.2% lower) and the Intel Core i7-12700K (35287, 0.2% lower). This means the processor is not the limiting factor in Control.
The GPU is the bottleneck. The GTX 1070 ranks in the 47th percentile among all GPUs, with an average score of 9780. Its nearest rivals are all within 0.7% of its performance, but these are not gaming-focused cards. The combination's overall rank of 3083 out of 3720 confirms that while the CPU is a high-end part, the GPU drags the system down to a midrange gaming experience.
The practical implication is that users with this combination should focus on GPU upgrades to improve Control's performance. Replacing the GTX 1070 with a stronger card would yield significant gains, while the i7-12700KF has enough headroom to support a much faster GPU without becoming a bottleneck.