Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

53%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
97 FPS
Ultra 1080p Measured
54 FPS

1440p (2K / QHD)

Low 1440p Measured
74 FPS
Ultra 1440p Measured
42 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
27 FPS
16.1ms Frame Time
24ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 27,799
Graphics Card
Required 27,787
Your GPU 9,780

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 33 32 47
1440p QHD 42 44 51 74
1080p Full HD 54 62 68 97

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 62
1920x1080 Low 97
1920x1080 Medium 68
1920x1080 Ultra 54
2560x1440 High 44
2560x1440 Low 74
2560x1440 Medium 51
2560x1440 Ultra 42
3840x2160 High 33
3840x2160 Low 47
3840x2160 Medium 32
3840x2160 Ultra 27

Performance Analysis: Control on Your System

Measured FPS Breakdown

The recorded data for Control with the Intel Core i5-12600KF and NVIDIA GeForce GTX 1070 spans three resolutions and four quality presets. The measurements provide a clear picture of how this combination handles the game's demands across the spectrum of display configurations.

At 3840x2160, the results are consistently below the 60 FPS playable threshold. The High preset delivers an average of 32.8 FPS, while Medium produces a nearly identical 32.3 FPS. Dropping to Low improves the average to 46.9 FPS, but this still falls short of fluid gameplay. The Ultra preset is the most demanding, yielding just 26.5 FPS on average. Notably, the difference between High and Medium at 4K is minimal, suggesting that the renderer is not strongly differentiated between these two settings at this resolution.

Moving to 2560x1440, the picture improves noticeably. The Low preset achieves an average of 74 FPS, comfortably above the 60 FPS target. Medium follows at 51.1 FPS, High at 43.5 FPS, and Ultra at 41.5 FPS. The scaling from Low to Medium represents a significant drop of 22.9 FPS, indicating that the Medium preset introduces substantially heavier rendering workloads. The gap between High and Ultra is smaller, only 2 FPS, which implies that the Ultra preset's additional effects are less impactful on the GTX 1070's Pascal architecture at this resolution.

At 1920x1080, the configuration performs best. The Low preset reaches an average of 96.6 FPS, which is a strong result for a 1080p experience. Medium maintains 68.4 FPS, while High produces 61.9 FPS. The Ultra preset drops to 53.5 FPS, falling just short of the 60 FPS threshold. The progression from Low to Ultra shows a steady decline, with each tier costing roughly 8 to 15 FPS on average. The High preset at 1080p is particularly noteworthy, as it clears the playable threshold by a margin of 1.9 FPS, making it the most visually rich setting that remains playable.

The database does not include minimum or maximum FPS values for any of these configurations, so the analysis relies solely on average frame rates. This means that transient dips below the average could occur, especially in scenes with heavy particle effects or physics simulations, which Control is known for. The absence of these metrics limits the granularity of the assessment, but the averages still offer a reliable indication of overall performance.

Best Settings per Resolution

For each resolution, the most demanding preset that stays at or above 60 FPS on average is as follows.

At 3840x2160, no preset achieves the 60 FPS threshold. The closest is Low at 46.9 FPS, but this is still 13.1 FPS short. The verdict data confirms that the playable settings list is empty for this resolution, meaning the GTX 1070 cannot deliver a smooth experience at 4K regardless of quality level. Users targeting 4K would need to consider a more powerful GPU or accept a compromised frame rate.

At 2560x1440, the only playable setting is Low, which produces an average of 74 FPS. This is the sole preset that clears the threshold, and it does so with a comfortable 14 FPS margin. Medium, High, and Ultra all fall below 60 FPS, with Medium being the closest at 51.1 FPS. The verdict identifies Low as the best settings choice at this resolution, offering a playable experience but with reduced visual fidelity.

At 1920x1080, three presets are playable: High at 61.9 FPS, Medium at 68.4 FPS, and Low at 96.6 FPS. The best settings selection is High, as it represents the most demanding option that still maintains an average above 60 FPS. The margin is slim, only 1.9 FPS, so users who prioritize stability over maximum visual quality might prefer Medium, which offers a 6.5 FPS larger buffer. Ultra at 53.5 FPS is not recommended if the 60 FPS target is strict, though the gap is only 6.5 FPS, and some users may find the visual improvements worth the trade-off.

CPU and GPU Roles

The data reveals distinct scaling patterns that indicate which component is more influential at each resolution. By examining the frame rate changes across presets and resolutions, it becomes clear that the GPU is the primary bottleneck for this combination.

At 3840x2160, the frame rates are consistently low across all presets, ranging from 26.5 FPS at Ultra to 46.9 FPS at Low. The variation between presets is relatively small in absolute terms, with a maximum difference of 20.4 FPS. This compression suggests that the GPU is heavily saturated at 4K, and even reducing settings to Low cannot unlock substantially higher performance. The i5-12600KF, with its 10 cores and 16 threads, is unlikely to be the limiting factor here, as the GTX 1070's older Pascal architecture struggles to fill the pixel count of 3840x2160.

At 2560x1440, the preset scaling is more pronounced. Low achieves 74 FPS, which is 22.9 FPS higher than Medium at 51.1 FPS. This larger delta indicates that the GPU's utilization decreases significantly at Low, allowing the CPU to feed frames more effectively. The fact that Medium and High are closer together, 51.1 FPS versus 43.5 FPS, suggests that the GPU is again becoming the constraint as quality increases. The CPU's role appears secondary here, as the frame rates track closely with the rendering load rather than with CPU-bound tasks.

At 1920x1080, the pattern shifts slightly. The Low preset reaches 96.6 FPS, which is high enough that the CPU's performance might begin to matter. The i5-12600KF is a capable processor, and its benchmark scores, such as a Cinebench R23 multicore result of 23391 and a Passmark single-thread score of 3925, indicate strong single-threaded performance. However, the GTX 1070 still appears to be the dominant factor, as the frame rates drop steadily with increasing preset quality. The difference between Low and Medium is 28.2 FPS, which is larger than the difference between Medium and High at 6.5 FPS. This nonlinear scaling is typical of GPU-bound scenarios where certain settings, such as shadow quality or reflections, cause disproportionate load increases.

Across all resolutions, the data shows no evidence of CPU bottlenecking. The frame rates scale with resolution and preset in a manner consistent with GPU limitations. If the CPU were the constraint, we would expect to see similar frame rates across different resolutions at the same preset, which is not the case. For instance, the Low preset yields 96.6 FPS at 1080p but only 74 FPS at 1440p, a clear GPU-driven decline.

How This Combo Ranks

The combination of the Intel Core i5-12600KF and NVIDIA GeForce GTX 1070 ranks 3118 out of 3720 tested combos for Control. This places it in the lower tier of the database, roughly in the 16th percentile of all configurations. The ranking reflects the GPU's age, as the GTX 1070 is an end-of-life product from the Pascal generation, and its performance in a demanding title like Control is limited relative to modern hardware.

The CPU, however, is a strong component. The i5-12600KF holds a percentile of 79 against all CPUs, meaning it outperforms most processors in synthetic benchmarks. Its average benchmark score of 27799 places it close to the Intel Core i9-10900K, which scores 27872, a delta of -0.3%. The GPU, by contrast, has a percentile of 47 against all GPUs, indicating it sits near the median. Its average benchmark score of 9780 is within 0.5% of several rivals, including the AMD FirePro W5000 at 9803 and the NVIDIA Quadro M2000M at 9832.

The low combo rank is therefore attributable to the GPU's limitations rather than the CPU's capabilities. In Control, which is a visually demanding action-adventure game with complex physics and lighting, the GTX 1070 cannot fully utilize the i5-12600KF's potential. The resulting frame rates are playable at 1080p and 1440p with reduced settings, but the overall ranking reflects that many other combinations deliver higher performance.

Similar Performance Alternatives

Based on the nearest rivals for both the CPU and GPU, several alternative configurations would behave similarly to the tested combo.

For the CPU, the closest matches include the Intel Core i9-10900K, which has an average score of 27872 and a delta of -0.3% relative to the i5-12600KF. This means the i9-10900K performs nearly identically in synthetic benchmarks, so pairing it with the GTX 1070 would yield very similar frame rates in Control. The AMD Ryzen 7 5800X3D scores 27896, a delta of -0.3%, and the AMD Ryzen 7 6800U scores 27887, also -0.3%. These processors would not meaningfully change the gaming experience with the GTX 1070, as the GPU remains the bottleneck. The AMD Ryzen 5 8500GE scores 27712, a delta of 0.3%, making it a slightly weaker but still comparable alternative.

For the GPU, the nearest rivals are all within a narrow performance band. The AMD FirePro W5000 scores 9803, a delta of -0.2% from the GTX 1070's 9780. The NVIDIA Quadro M2000M scores 9832, a delta of -0.5%. The NVIDIA Tesla M10 and Tesla C2070 score 9724 and 9716, with deltas of 0.6% and 0.7% respectively. These GPUs would produce frame rates within a few percent of the GTX 1070 in Control, meaning users could expect nearly identical results at the same settings and resolutions.

The practical implication is that swapping the i5-12600KF for any of its nearest CPU rivals would not change the outcome, as the GTX 1070's performance ceiling is the limiting factor. Similarly, swapping the GTX 1070 for one of its nearest GPU rivals would result in a negligible performance difference. Users seeking a substantial improvement would need to look beyond these alternatives to higher-tier GPUs.

FAQ

Q: Can this PC run Control at 1080p with High settings?

A: Yes, the recorded data shows an average of 61.9 FPS at 1920x1080 with High settings, which is above the 60 FPS threshold. This is the most demanding playable preset at this resolution.

Q: What is the best settings option at 1440p?

A: The only playable setting at 2560x1440 is Low, which achieves an average of 74 FPS. Medium, High, and Ultra all fall below 60 FPS, with Medium being the closest at 51.1 FPS.

Q: Is 4K gaming possible with this hardware?

A: No, at 3840x2160, no preset reaches the 60 FPS threshold. The highest average is 46.9 FPS at Low settings, while Ultra yields just 26.5 FPS. The verdict data lists no playable settings for this resolution.

Q: How does the GTX 1070 compare to its nearest GPU rivals?

A: The GTX 1070 has an average benchmark score of 9780. The AMD FirePro W5000 scores 9803 (-0.2%), the NVIDIA Quadro M2000M scores 9832 (-0.5%), and the NVIDIA Tesla M10 scores 9724 (0.6%). These are all within 1% of each other, so performance would be nearly identical.

Q: Does the CPU limit performance in this game?

A: The data does not indicate CPU bottlenecking. Frame rates scale with resolution and preset in a GPU-bound pattern. The i5-12600KF ranks in the 79th percentile among CPUs, while the GTX 1070 ranks in the 47th percentile among GPUs, suggesting the GPU is the limiting component.

Q: What average FPS does the Low preset achieve at 1080p?

A: The Low preset at 1920x1080 produces an average of 96.6 FPS, which is the highest recorded frame rate for this combination across all tested configurations.

The Verdict

The Intel Core i5-12600KF and NVIDIA GeForce GTX 1070 can run Control, but the experience depends heavily on the target resolution and quality settings.

At 3840x2160, this PC cannot deliver a playable experience. The verdict by resolution lists no playable settings, and the best average is 46.9 FPS at Low. Users attempting 4K will face stuttering and reduced responsiveness, making this resolution unsuitable for the game.

At 2560x1440, the configuration is playable only with Low settings, which achieve 74 FPS on average. This clears the 60 FPS threshold with a 14 FPS margin, providing a smooth experience but with significant visual compromises. Medium at 51.1 FPS, High at 43.5 FPS, and Ultra at 41.5 FPS are all below the threshold, so users must accept reduced quality to maintain fluidity.

At 1920x1080, the PC is playable across three presets: High at 61.9 FPS, Medium at 68.4 FPS, and Low at 96.6 FPS. The High preset is the most demanding option that stays above 60 FPS, but the margin is slim. Users who prefer a larger safety buffer can choose Medium, which offers 6.5 FPS more headroom. The Ultra preset at 53.5 FPS falls short of the threshold, so it is not recommended for strict 60 FPS play.

In summary, this combination is a viable 1080p gaming setup for Control, with the ability to handle High settings at a playable frame rate. At 1440p, only Low settings are viable, and 4K is out of reach. The CPU is more than capable, but the GTX 1070's age limits the overall performance, placing this combo in the lower ranks of the database.