Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 73 | 93 | 106 |
| 1440p QHD | 91 | 126 | 162 | 174 |
| 1080p Full HD | 135 | 174 | 190 | 199 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
Control, the 2019 action adventure title, is a demanding game that stresses both the processor and the graphics card. This analysis examines the recorded performance of the Intel Core i5-10400F paired with the AMD Radeon RX 7900 XTX. The data covers three resolutions and four quality presets, providing a complete picture of what this combination can achieve. The benchmark results show a system that is capable of high frame rates at 1080p and 1440p, while 4K presents a more significant challenge that requires careful setting selection.
Measured FPS Breakdown
The recorded measurements for this hardware combination show strong performance across most settings, with the expected drop-off as resolution increases. At 1920x1080, the system delivers frame rates well above the 60 FPS playable threshold in every preset. The Low preset averages 199 FPS, while Medium averages 190 FPS with a minimum of 161 FPS and a maximum of 218 FPS. High settings produce an average of 174 FPS, and even the demanding Ultra preset maintains a healthy 135 FPS average. This resolution is clearly where the RX 7900 XTX can stretch its legs, with the CPU keeping up without creating a bottleneck.
Moving to 2560x1440, the performance remains excellent but shows the expected scaling. The Low preset averages 174 FPS, which is a 25 FPS drop from 1080p. Medium settings average 162 FPS, with a recorded minimum of 138 FPS and maximum of 186 FPS. High settings produce 126 FPS on average. The Ultra preset, which is the most visually demanding, still manages an average of 91 FPS. This is a 44 FPS reduction compared to the 1080p Ultra result, but it remains comfortably above the playable threshold.
At 3840x2160, the system faces its toughest challenge. The Low preset averages 106 FPS, which is still very playable. Medium settings produce 93 FPS on average, with a minimum of 79 FPS and a maximum of 107 FPS. High settings drop to 73 FPS on average. The Ultra preset falls to 52 FPS on average, which is below the 60 FPS playable threshold. This is the only configuration in the recorded data that fails to maintain smooth gameplay, indicating that 4K Ultra is too demanding for this combination.
Similar Performance Alternatives
The database provides nearest rival comparisons for both the CPU and GPU, which helps contextualize the performance of this specific combination. For the Intel Core i5-10400F, the closest matches in average benchmark score are the Intel Xeon 6756E with a delta of 0.2 percent, the Intel Core 7 160UL with a delta of -0.3 percent, the AMD EPYC 7552 with a delta of 0.5 percent, and the AMD Ryzen 3 7320C with a delta of -0.6 percent. These processors all have average scores within a single percentage point of each other, meaning a system with any of these CPUs would likely produce very similar frame rates in Control.
For the AMD Radeon RX 7900 XTX, the nearest rivals in the database are somewhat unexpected given the modern architecture of this GPU. The NVIDIA GeForce GTX 1060 3 GB shows a delta of 0.4 percent, the NVIDIA Quadro K5200 shows a delta of -1 percent, the AMD FirePro D300 shows a delta of -1.2 percent, and the NVIDIA TITAN Xp shows a delta of 1.2 percent. These deltas are all small, but they represent different performance characteristics in synthetic benchmarks. The practical takeaway is that a system with any of these GPUs would land in a similar performance band, though real-world gaming results can vary based on driver optimization and game-specific requirements.
CPU and GPU Roles
The scaling between resolutions and presets reveals how the CPU and GPU share the workload in Control. The data shows that the GPU becomes the dominant factor as resolution increases, while the CPU maintains a consistent baseline of performance. At 1920x1080, the difference between Low and Ultra presets is 64 FPS (199 versus 135), which demonstrates that the graphics card is heavily utilized even at lower resolutions. The CPU's role is to feed the GPU with frame data, and the i5-10400F appears to do this effectively, as frame rates remain high across all presets.
When moving from 1080p to 1440p, the average frame rates drop by roughly 25 to 36 percent depending on the preset. For example, High settings drop from 174 FPS to 126 FPS, a reduction of 48 FPS. This indicates that the GPU is the limiting factor, as the resolution increase requires more pixel processing power. The CPU workload does not scale with resolution in the same way, so its contribution remains relatively constant. The recorded data suggests that the i5-10400F is not holding back the RX 7900 XTX at 1080p or 1440p.
At 3840x2160, the GPU is clearly the bottleneck. The Low preset averages 106 FPS, which is substantially lower than the 174 FPS at 1440p Low. The Ultra preset drops to 52 FPS, below the playable threshold. This pattern confirms that the RX 7900 XTX is being pushed to its limits at 4K, while the CPU has more headroom. The fact that the system can still produce over 100 FPS at 4K Low suggests that the processor is not a limiting factor in this game, even with the demanding visual effects that Control is known for.
FAQ
Q: Can this PC run Control at 1920x1080 with Ultra settings?
A: Yes. The recorded data shows an average of 135 FPS at 1080p Ultra, which is well above the 60 FPS playable threshold. The minimum frame rate was not recorded for this preset, but the average indicates smooth performance.
Q: What is the best preset for 2560x1440?
A: The Ultra preset is playable at 1440p, with an average of 91 FPS. This is the most demanding preset that stays at or above 60 FPS, so it is the recommended choice for maximum visual quality at this resolution.
Q: Is 4K gaming possible with this hardware?
A: Yes, but not at the highest settings. The High preset at 3840x2160 averages 73 FPS, which is playable. The Ultra preset drops to 52 FPS, which is below the 60 FPS threshold, so it is not recommended for smooth gameplay.
Q: How does the RX 7900 XTX compare to its nearest rivals?
A: The database shows that the RX 7900 XTX has an average benchmark score of 19410, which is within 1.2 percent of the NVIDIA TITAN Xp. The closest rival, the NVIDIA GeForce GTX 1060 3 GB, has a score that is 0.4 percent lower.
Q: How does the i5-10400F compare to its nearest rivals?
A: The i5-10400F has an average benchmark score of 14185. The nearest rival, the Intel Xeon 6756E, has a score that is 0.2 percent higher. All four nearest rivals are within 0.6 percent of the i5-10400F's score.
Q: What is the most demanding setting that maintains 60 FPS at 4K?
A: The High preset at 3840x2160 averages 73 FPS, making it the most demanding playable option at that resolution. The Medium preset averages 93 FPS, and the Low preset averages 106 FPS.
The Verdict
The recorded data confirms that this PC can run Control effectively at most resolutions and settings. At 1920x1080, every preset is playable, with the Ultra preset delivering 135 FPS on average. At 2560x1440, all four presets also clear the 60 FPS threshold, with Ultra averaging 91 FPS. At 3840x2160, the situation changes: the High, Medium, and Low presets are playable, with 73, 93, and 106 FPS averages respectively, but the Ultra preset falls short at 52 FPS.
The verdict by resolution is clear. For 1080p and 1440p, this system offers a fully playable experience at the highest quality settings. For 4K, players should stick to High settings or lower to maintain smooth frame rates. The combination of the i5-10400F and RX 7900 XTX is well balanced for this game, with the GPU being the primary factor at higher resolutions and the CPU providing sufficient support at lower resolutions.
Best Settings per Resolution
The most demanding preset that stays at or above 60 FPS varies by resolution, based on the measured data. At 1920x1080, the Ultra preset is the best choice, delivering 135 FPS on average. This provides the highest visual quality while maintaining a frame rate more than double the playable threshold. At 2560x1440, the Ultra preset also remains the best option, with an average of 91 FPS. This is a significant visual upgrade over High settings, which average 126 FPS, and the frame rate is still well above 60.
At 3840x2160, the High preset is the recommended choice, with an average of 73 FPS. The Medium preset averages 93 FPS, but High offers better visual fidelity while still staying above the playable threshold. The Ultra preset is not viable at 4K, as its 52 FPS average falls below 60. Players who prioritize frame rate over visual quality at 4K can use the Medium preset for 93 FPS, but High is the best balance of quality and performance.
How This Combo Ranks
The database ranks this specific combination of the Intel Core i5-10400F and AMD Radeon RX 7900 XTX at position 342 out of 3720 tested combos for Control. This places the system in the top 9.2 percent of all tested configurations, which is a strong result. The ranking reflects the overall performance across all resolutions and presets, and it confirms that this hardware pair is well suited for this game. The high ranking is driven primarily by the GPU's exceptional performance at lower resolutions, while the CPU provides enough processing power to avoid becoming a limiting factor. Players using this combo can expect a smooth and responsive experience in Control, with the only major compromise occurring at 4K Ultra settings.