Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

37%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
170 FPS
Ultra 1080p Measured
96 FPS

1440p (2K / QHD)

Low 1440p Measured
132 FPS
Ultra 1440p Measured
72 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
49 FPS
9.1ms Frame Time
14ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 14,185
Graphics Card
Required 27,787
Your GPU 11,627

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 49 56 63 89
1440p QHD 72 83 94 132
1080p Full HD 96 110 124 170

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 110
1920x1080 Low 170
1920x1080 Medium 124
1920x1080 Ultra 96
2560x1440 High 83
2560x1440 Low 132
2560x1440 Medium 94
2560x1440 Ultra 72
3840x2160 High 56
3840x2160 Low 89
3840x2160 Medium 63
3840x2160 Ultra 49

Performance Analysis: Control on Your System

Best Settings per Resolution

The recorded data identifies the most demanding preset that maintains at least 60 FPS on average at each resolution. At 3840x2160, the highest playable preset is Medium, with an average frame rate of 63 FPS. High and Ultra fall below the 60 FPS threshold at this resolution, averaging 56 FPS and 49 FPS respectively. Low settings at 4K produce 89 FPS on average, but Medium delivers a better visual experience while still clearing the playability bar.

At 2560x1440, the full range of presets remains playable. Ultra settings achieve an average of 72 FPS, which is the best visual quality available while staying above 60 FPS. High averages 83 FPS, Medium averages 94 FPS, and Low averages 132 FPS. The data shows that the GPU has enough headroom at this resolution to run the most demanding preset without compromising frame rate.

At 1920x1080, Ultra settings again represent the most demanding playable preset, with an average of 96 FPS. High averages 110 FPS, Medium averages 124 FPS, and Low averages 170 FPS. Every preset at 1080p clears the 60 FPS threshold by a substantial margin, making the Ultra preset the clear recommendation for users prioritizing visual fidelity. The measured minimum frame rates for Medium settings at each resolution (105 FPS at 1080p, 80 FPS at 1440p, 54 FPS at 4K) indicate that even the lowest recorded values remain playable at 1080p and 1440p, while the 4K Medium preset dips slightly below 60 FPS only in its minimum reading.

Similar Performance Alternatives

The database places this CPU and GPU combination in a specific performance tier based on aggregate benchmark scores. The Intel Core i5-10400F holds an average benchmark score of 14185, placing it in the 68th percentile of all CPUs. Its nearest rivals show near-identical aggregate performance: the Intel Xeon 6756E scores 14163, a 0.2% delta; the Intel Core 7 160UL scores 14232, a 0.3% delta; the AMD EPYC 7552 scores 14115, a 0.5% delta; and the AMD Ryzen 3 7320C scores 14277, a 0.6% delta. Any of these processors would deliver essentially interchangeable CPU-bound behavior in this game, though their platform characteristics differ substantially.

The AMD Radeon RX 7800 XT carries an average benchmark score of 11627, which places it in the 51st percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce GTX 1660 with a score of 11680 (0.5% faster), the AMD Radeon Pro 5500M with a score of 11528 (0.9% slower), the NVIDIA Tesla K20c with a score of 11479 (1.3% slower), and the AMD Radeon RX 6500 XT with a score of 11842 (1.8% faster). These deltas are small enough that users moving between these GPUs would observe very similar frame rates in Control, assuming no other system bottlenecks. The RX 7800 XT sits in an unusual position: its raw G3D score is strong, but its percentile ranking among all GPUs is only 51st, reflecting the wide range of hardware in the database.

The practical implication is that this CPU and GPU pairing sits in a balanced performance band. Neither component dramatically outclasses the other, and swapping to any of the nearest rivals would likely shift results by only a few percentage points. The measured frame rates in Control are therefore representative of this entire performance neighborhood.

CPU and GPU Roles

The benchmark results across resolutions and presets reveal which component carries the workload at each setting. The frame rate scaling between 1920x1080 and 3840x2160 is substantial across all presets, indicating that the GPU becomes progressively more dominant as pixel count rises. At Low settings, the average frame rate drops from 170 FPS at 1080p to 132 FPS at 1440p and 89 FPS at 4K. This represents a 48% reduction from 1080p to 4K at Low settings, a spread consistent with GPU-bound rendering.

The scaling pattern changes slightly with preset level. At Ultra settings, the average frame rate falls from 96 FPS at 1080p to 72 FPS at 1440p and 49 FPS at 4K, a 49% reduction from 1080p to 4K. The similarity in scaling percentages across presets suggests that the GPU is the primary limiter at all resolutions, but the CPU still contributes enough headroom to allow the GPU to scale predictably. If the CPU were the bottleneck, the frame rates would compress together at higher resolutions, showing smaller differences between presets. Instead, the data shows consistent preset separation at every resolution: Low is always substantially faster than Ultra, and the gaps remain proportionally similar.

At 1080p, the CPU's role is more visible. The difference between Low and Ultra at 1080p is 74 FPS (from 170 to 96), whereas at 4K the same preset gap is 40 FPS (from 89 to 49). The larger absolute spread at 1080p indicates that the CPU can still drive higher frame rates when the GPU workload is lighter, but the GPU eventually caps performance as resolution increases. The Intel Core i5-10400F, with its 6 cores and 12 threads, provides sufficient single-thread performance to avoid bottlenecking the RX 7800 XT at lower resolutions, but the GPU clearly dominates the workload at 1440p and above.

The Medium preset measurements include minimum and maximum frame rates, which offer additional insight. At 1080p Medium, the spread from minimum to maximum is 37 FPS (105 to 142). At 1440p Medium, the spread is 28 FPS (80 to 108). At 4K Medium, the spread is 19 FPS (54 to 73). The narrowing spread at higher resolutions reflects reduced CPU involvement: frame time variance shrinks when the GPU is the consistent limiter, whereas at lower resolutions the CPU can introduce larger swings as it feeds frames to the GPU.

Measured FPS Breakdown

At 1920x1080, the complete set of measurements shows strong performance across all presets. Low settings average 170 FPS. Medium settings average 124 FPS, with a minimum of 105 FPS and a maximum of 142 FPS. High settings average 110 FPS. Ultra settings average 96 FPS. Every preset at this resolution clears the 60 FPS playability threshold by at least 36 FPS, and even the lowest recorded minimum (105 FPS at Medium) remains comfortably above 60 FPS.

At 2560x1440, the results remain strong but show the expected reduction from 1080p. Low settings average 132 FPS. Medium settings average 94 FPS, with a minimum of 80 FPS and a maximum of 108 FPS. High settings average 83 FPS. Ultra settings average 72 FPS. The minimum reading at Medium, 80 FPS, still exceeds the playability threshold, and the Ultra average of 72 FPS leaves a 12 FPS margin above 60 FPS.

At 3840x2160, the performance drops more sharply. Low settings average 89 FPS. Medium settings average 63 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. High settings average 56 FPS. Ultra settings average 49 FPS. The Medium preset is the only setting above Low that maintains an average above 60 FPS, and its minimum reading of 54 FPS indicates occasional dips below the threshold. High and Ultra both fall short of 60 FPS on average, making them unsuitable for consistent playability at this resolution. The Low preset, at 89 FPS average, offers the safest margin but with reduced visual quality.

The data shows a clear progression: each step from 1080p to 1440p to 4K costs roughly 25-30% of the average frame rate across presets, with the exact percentage varying slightly by setting. The Medium preset measurements, which include all three frame rate metrics, show that the minimum frame rate scales more steeply than the average, dropping from 105 to 80 to 54 across the three resolutions.

The Verdict

The recorded verdict data answers directly whether this PC can run Control at playable frame rates. At 1920x1080, all four presets are playable, and the best setting is Ultra with an average of 96 FPS. This leaves a 36 FPS margin above the 60 FPS threshold, meaning users can run the game at maximum visual quality with substantial headroom for demanding scenes.

At 2560x1440, all four presets also remain playable, with Ultra averaging 72 FPS. This is a more modest margin of 12 FPS, but it still clears the threshold. Users prioritizing stability may prefer High at 83 FPS, but Ultra remains viable based on the average.

At 3840x2160, only Low and Medium are playable. The best playable setting is Medium, with an average of 63 FPS. This is a narrow margin of just 3 FPS above the threshold, and the recorded minimum of 54 FPS at Medium suggests that frame drops below 60 FPS will occur during demanding moments. High averages 56 FPS and Ultra averages 49 FPS, both below the playability threshold. The verdict is clear: this system can run Control at 4K only with reduced settings, and even then the experience is marginal.

Overall, this combination of Intel Core i5-10400F and AMD Radeon RX 7800 XT is fully capable of running Control at 1080p and 1440p with all settings maxed out, and at 4K with Medium settings or lower. The 60 FPS threshold is comfortably exceeded at the two lower resolutions, while 4K requires a compromise on visual fidelity to maintain playable frame rates.

FAQ

Q: Can this PC run Control at 4K with Ultra settings?

A: No. The measured average frame rate at 3840x2160 Ultra is 49 FPS, which falls below the 60 FPS playability threshold. The best playable setting at 4K is Medium, with an average of 63 FPS.

Q: What is the highest preset that maintains 60 FPS at 2560x1440?

A: Ultra settings maintain an average of 72 FPS at 2560x1440, making it the most demanding preset that clears the 60 FPS threshold at this resolution.

Q: How does the frame rate difference between Low and Ultra change from 1080p to 4K?

A: At 1080p, the difference between Low (170 FPS) and Ultra (96 FPS) is 74 FPS. At 4K, the difference narrows to 40 FPS, with Low at 89 FPS and Ultra at 49 FPS. This indicates the GPU becomes the dominant bottleneck at higher resolutions.

Q: Which component limits performance more at 1920x1080?

A: The data shows the GPU still limits performance at 1080p, but the CPU has more influence than at higher resolutions. The larger frame rate spread between presets at 1080p compared to 4K suggests the CPU can drive higher frame rates when the GPU workload is lighter.

Q: Is the 4K Medium preset stable enough for consistent play?

A: The average frame rate is 63 FPS, but the recorded minimum is 54 FPS. This means the frame rate occasionally drops below the 60 FPS threshold, so users may experience brief stutters in demanding scenes.

Q: How does this system's CPU compare to its nearest alternatives in aggregate performance?

A: The Intel Core i5-10400F scores 14185 on average, which is within 0.6% of its nearest rivals: the AMD Ryzen 3 7320C, Intel Core 7 160UL, Intel Xeon 6756E, and AMD EPYC 7552. Any of these would produce similar results in CPU-bound scenarios.