Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 42 | 47 | 66 |
| 1440p QHD | 54 | 62 | 70 | 98 |
| 1080p Full HD | 71 | 82 | 92 | 130 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 9 9900X and AMD Radeon RX 9060 combination delivers a solid 1080p experience in Control, but the GPU becomes the limiting factor as resolution climbs. The data shows a clear tiered performance curve: at 1080p, every preset clears the 60 FPS playable threshold; at 1440p, three of four presets stay above 60 FPS; at 4K, only Low settings remain playable. This is a balanced pairing for high-refresh 1080p gaming, with diminishing returns at higher resolutions due to the RX 9060’s 8 GB memory configuration and mid-range compute throughput.
FAQ
*Q: Can this PC run Control at 1080p with maximum settings?*
A: Yes. At 1920x1080 with Ultra settings, the combo achieves an average of 71 FPS, which is above the 60 FPS playable threshold. The minimum FPS is not reported for Ultra, but the average suggests consistent performance.
Q: What is the best playable preset at 1440p?
A: High settings at 2560x1440 deliver an average of 62 FPS, making it the most demanding preset that stays at or above 60 FPS. Medium settings run at 70 FPS, but High offers better visual quality for only an 8 FPS cost.
Q: Is 4K gaming viable with this hardware?
A: Only at Low settings. At 3840x2160, Low averages 66 FPS, while Medium drops to 47 FPS and High falls to 42 FPS. Ultra is unplayable at 36 FPS. The 8 GB VRAM and 128-bit memory bus limit higher presets at this resolution.
Q: How does the RX 9060 compare to its nearest GPU rivals?
A: The RX 9060’s average benchmark score is 16014, placing it 0.7% below the NVIDIA GeForce RTX 3060 Ti (16129), 1% above the AMD Radeon R9 370X (15862), and 1% above the AMD Radeon RX 7700 (15852). Performance is essentially neck-and-neck with the RTX 3060 Ti.
Q: What is the combo’s overall ranking for this game?
A: The AMD Ryzen 9 9900X + RX 9060 ranks 2152 out of 3720 tested combos for Control, placing it in the upper-middle tier. The CPU itself sits in the 92nd percentile among all CPUs, while the GPU is in the 59th percentile.
Q: Does the CPU bottleneck the GPU in this game?
A: No. The Ryzen 9 9900X scores 32172 in Cinebench R23 multi-core and 2253 in single-core, ranking in the 92nd percentile overall. With rivals like the Intel Core i9-14900 (58115 avg score) performing within 1.1%, the CPU provides ample headroom for the RX 9060.
How This Combo Ranks
The combo’s rank of 2152 out of 3720 tested configurations places it in the 57.9th percentile of all CPU-GPU pairings for Control. This is a mid-pack result, reflecting the GPU’s modest standing relative to the CPU’s strength. The Ryzen 9 9900X is a high-end processor—its average benchmark score of 57498 puts it in the 92nd percentile of all CPUs—but the RX 9060’s 59th percentile ranking (average score 16014) drags the overall combination down.
The measured FPS data confirms this imbalance. At 1920x1080, the combo delivers 130 FPS on Low, 92 FPS on Medium, 82 FPS on High, and 71 FPS on Ultra. The spread between Low and Ultra is 59 FPS, indicating that the GPU scales predictably with settings. At 2560x1440, the range narrows: 98 FPS on Low, 70 FPS on Medium, 62 FPS on High, and 54 FPS on Ultra. The drop from 1080p to 1440p is roughly 25-30% across presets, which is typical for a mid-range GPU. At 4K, performance collapses—only Low (66 FPS) stays above the 60 FPS threshold, with Medium at 47 FPS, High at 42 FPS, and Ultra at 36 FPS.
This ranking suggests the combo is optimized for 1080p gaming with high refresh rates. The CPU’s 12 cores and 24 threads (boost clock 5.60 GHz) are overkill for Control, but they ensure no frame-time spikes from processor bottlenecks. For 1440p, the combo is borderline playable at High settings, but users seeking higher presets would need a stronger GPU.
Similar Performance Alternatives
The CPU and GPU each have nearby rivals that would produce similar in-game behavior. For the Ryzen 9 9900X, the closest alternatives in average benchmark score are the AMD EPYC 9015 (57555, -0.1%), AMD EPYC 7313 (57399, +0.2%), Intel Core i9-14900 (58115, -1.1%), and Intel Xeon Platinum 8260M (58323, -1.4%). These processors deliver virtually identical compute performance—within 1.4% of the 9900X—so swapping to any of them would not materially change FPS in Control, which is GPU-bound at most settings.
For the RX 9060, the nearest GPU rivals are the NVIDIA GeForce RTX 3060 Ti (16129, -0.7%), AMD Radeon R9 370X (15862, +1%), AMD Radeon RX 7700 (15852, +1%), and AMD Radeon Pro W5500 (15679, +2.1%). The RTX 3060 Ti is the most relevant comparison: its 0.7% score deficit means it would deliver nearly identical FPS in Control. The RX 7700, despite being a newer architecture, scores 1% lower and would perform similarly. The R9 370X and Pro W5500 are older parts but within 2.1%, so they would also produce comparable frame rates, though driver optimizations for Control may favor the RX 9060’s RDNA 4.0 architecture.
In practice, a system with a Ryzen 9 9900X and an RTX 3060 Ti would look almost indistinguishable in benchmark charts. The same applies to pairing the 9900X with an RX 7700. For users considering alternatives, the CPU choice is flexible—any of the listed rivals would preserve the same performance envelope. The GPU is the more critical component for Control, as the 4K results show.
The Verdict
This PC can run Control at 60 FPS or higher at 1080p and 1440p, but not at 4K except on the lowest settings. At 1920x1080, all four presets clear the threshold: Low (130 FPS), Medium (92 FPS), High (82 FPS), and Ultra (71 FPS). At 2560x1440, High (62 FPS) is the best playable preset, with Medium (70 FPS) and Low (98 FPS) also viable; Ultra falls short at 54 FPS. At 3840x2160, only Low (66 FPS) is playable—Medium (47 FPS), High (42 FPS), and Ultra (36 FPS) all dip below 60 FPS.
The verdict is straightforward: this is a capable 1080p machine with headroom for high-refresh monitors. At 1440p, users must accept High settings as the ceiling. At 4K, the experience is limited to Low presets, which undermines the visual fidelity of Control’s atmospheric environments. The 8 GB VRAM on the RX 9060 is the primary constraint at 4K, as higher presets likely exceed the memory buffer, causing the steep FPS drops. For 1440p gaming with ray tracing or higher textures, a GPU with more VRAM and bandwidth would be necessary.
CPU and GPU Roles
The Ryzen 9 9900X and RX 9060 play distinct roles depending on resolution. At 1920x1080, the CPU’s strong single-thread performance (2253 in Cinebench R23 single-core) ensures the GPU is fully utilized, but the GPU is still the bottleneck—the 59 FPS spread between Low and Ultra (130 vs 71) shows settings-driven scaling. At 2560x1440, the GPU’s workload increases, and the gap between Low and Ultra narrows to 44 FPS (98 vs 54), indicating the GPU is nearing its limits. At 3840x2160, the GPU is decisively the limiting factor: the 30 FPS difference between Low (66) and Ultra (36) is the smallest relative spread, and the absolute numbers are low across the board.
The CPU’s role diminishes as resolution rises. At 1080p, the 9900X’s 12 cores and 24 threads provide ample headroom, and its 92nd percentile ranking means it is never the bottleneck. At 4K, the GPU’s 59th percentile ranking and 8 GB memory become the dominant constraint—no CPU upgrade would improve the 42 FPS High result. The data shows that Control scales primarily with GPU settings, not CPU threads. The measured FPS at 1080p Low (130) versus 4K Low (66) illustrates how resolution multiplies GPU workload, while the CPU’s contribution remains constant.
For users overclocking, the 9900X has an unlocked multiplier, and its 4.40 GHz base clock (5.60 GHz boost) can be pushed further. However, the RX 9060’s 132 W TDP and 300 W suggested PSU mean power is not a concern. The GPU’s boost clock of 2990 MHz is already high, so manual overclocking would yield marginal gains relative to the resolution-based bottlenecks.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra with an average of 71 FPS. This is the recommended setting for 1080p users seeking maximum visual quality—the 60 FPS threshold is cleared with an 11 FPS margin, and the minimum FPS is not reported, but the average suggests stable performance.
At 2560x1440, the best playable preset is High with an average of 62 FPS. Medium runs faster at 70 FPS, but High provides better textures and effects for only an 8 FPS cost. Ultra drops below the threshold at 54 FPS, so High is the sweet spot for 1440p.
At 3840x2160, the only playable preset is Low with an average of 66 FPS. Medium falls to 47 FPS, High to 42, and Ultra to 36—all unplayable. Low settings at 4K will deliver a smooth experience, but users must sacrifice shadows, reflections, and post-processing effects. The 66 FPS average at Low is only 5 FPS above the threshold, so frame pacing may vary in intense combat scenes.
These recommendations align with the verdict: 1080p Ultra, 1440p High, and 4K Low are the maximum playable presets. The RX 9060’s 8 GB VRAM is the deciding factor at 4K, as higher presets likely exceed the memory buffer, causing the sharp FPS drops. For users prioritizing frame rate over visuals, 1440p Medium (70 FPS) offers a safer margin, while 1080p Medium (92 FPS) provides headroom for demanding scenes.