Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

80%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
105 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
81 FPS
Ultra 1440p Measured
43 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
28 FPS
15.2ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 51,947
Graphics Card
Required 27,787
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 37 41 54
1440p QHD 43 55 57 81
1080p Full HD 59 66 79 105

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 66
1920x1080 Low 105
1920x1080 Medium 79
1920x1080 Ultra 59
2560x1440 High 55
2560x1440 Low 81
2560x1440 Medium 57
2560x1440 Ultra 43
3840x2160 High 37
3840x2160 Low 54
3840x2160 Medium 41
3840x2160 Ultra 28

Performance Analysis: Control on Your System

The AMD Ryzen 9 5950X and AMD Radeon RX 6600 combination presents a clear split in Control: the CPU is overwhelmingly capable, while the GPU becomes the limiting factor at higher resolutions. With the Ryzen 9 5950X sitting in the 91st percentile of all CPUs and the RX 6600 in the 63rd percentile of all GPUs, this pairing leans heavily on the graphics card for gaming performance. The measured frame rates confirm this, showing that 1080p is the practical sweet spot, with 1440p playable only at Low settings, and 4K falling short of the 60 FPS threshold across all presets.

Similar Performance Alternatives

The Ryzen 9 5950X’s nearest rivals in aggregate benchmark scores are a tight cluster of high-end desktop and server parts. The Intel Core Ultra 5 235HX scores 52,073, a negligible 0.2% behind the 5950X’s average of 51,947. The AMD EPYC 8124P is 0.3% behind at 52,121, the Intel Core i9-13900F is 0.4% ahead at 51,730, and the Intel Core i7-14700 is 0.7% behind at 52,301. In practical terms, any of these processors would behave nearly identically in Control at the resolutions tested, since the game’s bottleneck shifts to the GPU well before CPU differences of this magnitude matter.

For the GPU side, the RX 6600’s nearest rivals are similarly close. The NVIDIA Quadro K6000 matches the RX 6600’s average score of 19,036 exactly, with a 0% delta. The NVIDIA GeForce RTX 4050 Mobile is 0.1% behind at 19,049, the NVIDIA Tesla K20m is 0.3% behind at 19,089, and the NVIDIA RTX 2000 Ada Generation is 0.4% ahead at 18,954. These deltas are all within measurement noise, so a system with any of these GPUs paired with a comparable CPU would produce frame rates within a few percent of what this combo delivers in Control. The data suggests that swapping the RX 6600 for an RTX 4050 Mobile or RTX 2000 Ada Generation would not move the needle at any resolution, given the sub-0.5% score differences.

It is worth noting the asymmetric nature of these rival sets. The CPU competitors are all newer or server-oriented parts that trade blows with the 5950X, while the GPU rivals include older workstation cards and a mobile chip. This reflects the RX 6600’s position as an entry-level desktop part in the 63rd percentile, whereas the 5950X is a top-tier desktop processor. For Control specifically, the GPU choice will dictate playable resolutions, so buyers should focus on that component when seeking similar performance.

CPU and GPU Roles

The measured FPS data makes the division of labor clear. At 1080p Low, the combo hits 105.4 FPS average, which indicates the CPU can feed the GPU well beyond the 60 FPS threshold. Moving from 1080p Low to 1080p Ultra drops the average to 59 FPS, a 44% reduction that is almost entirely GPU-driven. The Ryzen 9 5950X, with its 16 cores and 32 threads, is not the constraint here; the RX 6600’s 8 GB of GDDR6 memory and 224.0 GB/s bandwidth are.

At 1440p, the scaling shows the GPU being pushed harder. Low settings yield 80.8 FPS, but Medium drops to 56.5 FPS, and High falls to 54.5 FPS. The jump from Low to Medium alone costs 24.3 FPS, which is a 30% penalty. This steep drop-off between Low and Medium at 1440p indicates that the RX 6600’s compute resources (1792 shading units, 8.928 TFLOPS FP32) are saturated quickly when resolution increases. At 4K, the picture worsens: Low averages 53.7 FPS, Medium 41.4 FPS, High 37.1 FPS, and Ultra 28.2 FPS. No 4K preset reaches 60 FPS, confirming that the GPU is the sole limiting factor at this resolution.

The CPU’s role is best illustrated by the fact that the Ryzen 9 5950X’s multi-threaded scores (Cinebench R23 multi-core at 26,017, Passmark multithread at 45,424) are far beyond what Control needs. Even the single-thread performance (Cinebench R23 single-core at 1,614) is strong enough that CPU-related frame drops are unlikely. The data shows that resolution and preset changes have a consistent, predictable effect on FPS, which is characteristic of a GPU-bound scenario. At 1080p, the CPU has headroom; at 1440p and 4K, the GPU is clearly the bottleneck.

Measured FPS Breakdown

At 1920x1080, the combo performs well across most presets. Low settings average 105.4 FPS, which is the highest measured value for this system. Medium drops to 79.1 FPS, a 25% reduction from Low. High settings average 66.1 FPS, still above the 60 FPS threshold. Ultra averages exactly 59 FPS, just missing the playable mark. The progression from Low to Ultra costs 46.4 FPS, showing a steep but predictable scaling curve.

At 2560x1440, the results are more constrained. Low settings average 80.8 FPS, which is the only preset above 60 FPS. Medium drops to 56.5 FPS, a 30% loss from Low. High averages 54.5 FPS, and Ultra falls to 43.2 FPS. The gap between Medium and High is only 2 FPS, suggesting that the GPU is hitting a compute wall rather than a memory bandwidth limit. Ultra at 1440p is 37.6 FPS below the 1080p Ultra result, highlighting the resolution penalty.

At 3840x2160, all presets fail to reach 60 FPS. Low averages 53.7 FPS, Medium 41.4 FPS, High 37.1 FPS, and Ultra 28.2 FPS. The spread from Low to Ultra is 25.5 FPS. Even the lowest settings at 4K are 6.3 FPS short of the playable threshold. The data shows that 4K is not viable for this combo, regardless of settings. It is also notable that the min and max FPS values are null in the measured data, meaning only average frame rates are available for analysis.

The Verdict

This PC can run Control, but only at specific resolutions and presets. The verdict data is unambiguous: at 1920x1080, High, Low, and Medium settings all clear 60 FPS, with High being the best playable preset at 66.1 FPS average. Ultra at 1080p sits at 59 FPS, just below the threshold. At 2560x1440, only Low settings are playable, averaging 80.8 FPS. Medium at 1440p drops to 56.5 FPS, missing the mark. At 3840x2160, no settings are playable; the best case is Low at 53.7 FPS.

For a 60 FPS target, the system is a solid 1080p machine. The 1080p High preset provides a comfortable margin above the threshold, and dropping to Medium yields 79.1 FPS for more headroom. At 1440p, the system is limited to Low settings for a smooth experience, which is a significant compromise for a 1440p display. 4K is simply not an option for this GPU. The combo ranks 2,949 out of 3,720 combos in this game, placing it in the lower half of all tested configurations, which aligns with the GPU’s mid-range standing.

FAQ

Q: Can this system run Control at 4K with any settings?

A: No. The measured data shows that all 4K presets fail to reach 60 FPS. The best 4K result is Low at 53.7 FPS average, and Ultra drops to 28.2 FPS.

Q: What is the best playable preset at 1440p?

A: Low settings are the only playable option at 2560x1440, averaging 80.8 FPS. Medium drops to 56.5 FPS, which is below the 60 FPS threshold.

Q: How does the Ultra preset at 1080p compare to High?

A: Ultra averages 59 FPS, which is just under the 60 FPS playable threshold, while High averages 66.1 FPS. The 7.1 FPS difference is the cost of the Ultra preset’s additional graphical demands.

Q: Is the Ryzen 9 5950X or the RX 6600 the bottleneck in Control?

A: The GPU is the limiting factor. The CPU scores in the 91st percentile, while the GPU is in the 63rd percentile. The steep FPS drops between presets and resolutions indicate GPU saturation, especially at 1440p and 4K.

Q: What are the closest GPU alternatives to the RX 6600 in terms of benchmark scores?

A: The NVIDIA Quadro K6000 matches the RX 6600’s average score exactly (0% delta), while the RTX 4050 Mobile is 0.1% behind, the Tesla K20m is 0.3% behind, and the RTX 2000 Ada Generation is 0.4% ahead. Any of these would produce similar frame rates in Control.

Q: Does the combo exceed 60 FPS at 1440p Medium?

A: No. Medium at 1440p averages 56.5 FPS, which is 3.5 FPS below the playable threshold. Only Low settings at 1440p reach 60 FPS or higher.

Best Settings per Resolution

At 1920x1080, the best playable preset is High, with an average of 66.1 FPS. This provides a 6.1 FPS margin above the 60 FPS threshold while offering better visual quality than Medium (79.1 FPS) or Low (105.4 FPS). Ultra is not recommended, as it averages 59 FPS and misses the playable mark.

At 2560x1440, the only playable option is Low, averaging 80.8 FPS. This is the sole preset that clears 60 FPS at this resolution. Medium (56.5 FPS), High (54.5 FPS), and Ultra (43.2 FPS) all fall short, so users should stick with Low for a smooth experience.

At 3840x2160, no preset meets the 60 FPS requirement. The verdict data lists no playable settings and no best settings for 4K. The closest option is Low at 53.7 FPS, but that still leaves a 6.3 FPS deficit, making 4K unplayable for a 60 FPS target. Users with a 4K display would need to run the game at a lower resolution or accept sub-60 FPS performance.