Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 83 | 96 | 108 | 152 |
| 1440p QHD | 124 | 142 | 160 | 225 |
| 1080p Full HD | 163 | 188 | 211 | 296 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 5090 D pairing delivers exceptional performance in Control, with all tested settings at every resolution clearing the 60 FPS playability threshold. The data shows average frame rates ranging from 83 FPS at 4K Ultra to 296 FPS at 1080p Low, indicating this combination is not merely capable but dramatically overqualified for the game’s demands. Benchmark results place this combo at rank 21 out of 3720 tested configurations, placing it in the top fraction of all systems evaluated.
FAQ
Q: What is the highest playable setting at 4K resolution?
A: The data shows Ultra settings run at an average of 83 FPS at 3840x2160, which clears the 60 FPS threshold. This is the most demanding preset tested at this resolution, and it remains fully playable.
Q: Can this system maintain 60 FPS at 1440p with maximum settings?
A: Yes. At 2560x1440 with Ultra settings, the average frame rate is 124 FPS. The minimum observed frame rate at Medium settings (136 FPS) suggests the system has substantial headroom even in demanding scenes.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 7 9800X3D has an average benchmark score of 39768, placing it 0.4% above the AMD Ryzen 7 PRO 8840HS and 0.7% above the AMD Ryzen AI 7 450. It trails the AMD Ryzen AI 9 365 by 0.7% and the AMD Ryzen 7 7700 by 0.8%.
Q: What is the GPU’s performance percentile relative to all tested graphics cards?
A: The RTX 5090 D ranks in the 92nd percentile among all GPUs, with an average benchmark score of 77712. Its nearest rival, the AMD Radeon RX 6650M XT, scores 76904, a 1.1% difference.
Q: What is the least demanding preset that still provides a high frame rate?
A: At 1080p with Low settings, the system achieves 296 FPS average. This is the highest measured frame rate across all resolution and settings combinations in the data.
Q: Does the system show any signs of CPU bottlenecking at lower resolutions?
A: The frame rate scaling from 1440p to 1080p suggests the GPU remains the primary driver. At High settings, the average FPS increases from 142 at 1440p to 188 at 1080p, a 32% improvement that indicates GPU-bound behavior rather than CPU limitation.
Best Settings per Resolution
At 3840x2160, the most demanding preset that remains at or above 60 FPS is Ultra, with an average of 83 FPS. All four tested presets—Low (152 FPS), Medium (108 FPS), High (96 FPS), and Ultra (83 FPS)—clear the threshold, so the recommendation is the highest visual quality option.
For 2560x1440, Ultra settings deliver 124 FPS average. The full range includes Low at 225 FPS, Medium at 160 FPS, and High at 142 FPS. Every preset exceeds 60 FPS by a wide margin, making Ultra the clear choice for maximum fidelity.
At 1920x1080, Ultra settings achieve 163 FPS average. Lower presets produce 211 FPS at Medium, 188 FPS at High, and 296 FPS at Low. Since even Ultra provides nearly three times the playability threshold, there is no practical reason to reduce settings for frame rate purposes.
CPU and GPU Roles
The benchmark data reveals how component utilization shifts across resolutions. At 4K, the GPU is the dominant factor: frame rates scale from 152 FPS at Low to 83 FPS at Ultra, a 45% reduction as graphical load increases. The RTX 5090 D’s 32 GB GDDR7 memory and 1.79 TB/s bandwidth provide ample headroom for the 3840x2160 resolution’s texture and shading demands.
Moving to 1440p, the pattern remains GPU-limited but with more absolute performance. The spread from Low (225 FPS) to Ultra (124 FPS) represents a 45% drop, nearly identical to the 4K scaling. This consistency indicates the GPU is still the primary constraint at this resolution, with the CPU contributing sufficient throughput to avoid becoming the limiting factor.
At 1080p, the scaling compresses slightly: Low produces 296 FPS while Ultra yields 163 FPS, a 45% reduction again. The Ryzen 7 9800X3D’s 8 cores and 16 threads, combined with 96 MB of shared L3 cache, appear more than adequate for the game’s CPU demands at this resolution. The CPU’s 87th percentile ranking among all processors further supports that it is not a bottleneck in this configuration.
The consistent 45% performance delta between Low and Ultra across all three resolutions suggests the GPU is the primary determinant of frame rate throughout the testing range. The CPU’s role becomes slightly more prominent at 1080p, where the higher frame rates place greater demands on draw call processing, but the data shows no evidence of CPU-induced frame rate ceilings.
Similar Performance Alternatives
The CPU’s nearest rivals, based on average benchmark scores, include the AMD Ryzen 7 PRO 8840HS with a score of 39603 (0.4% lower), the AMD Ryzen AI 9 365 at 40048 (0.7% higher), the AMD Ryzen AI 7 450 at 39485 (0.7% lower), and the AMD Ryzen 7 7700 at 40081 (0.8% higher). These processors would deliver virtually indistinguishable performance in Control, as the game does not heavily stress multi-threaded workloads beyond 8 cores.
For the GPU, the nearest counterparts are the AMD Radeon RX 6650M XT (76904, 1.1% lower), AMD Radeon RX 6850M XT (78940, 1.6% higher), NVIDIA Tesla P100 PCIe 12 GB (79396, 2.1% higher), and NVIDIA Tesla P100 PCIe 16 GB (79605, 2.4% higher). The Tesla P100 variants are datacenter-oriented cards, but their compute-focused architecture would likely produce similar frame rates in this title given the benchmark proximity.
Systems pairing any of these CPUs with any of these GPUs would achieve comparable performance to the tested configuration. The delta percentages are all within 2.4%, which translates to a few frames per second difference at most in real-world gaming scenarios.
The Verdict
This PC can absolutely run Control, and the data indicates it does so with extraordinary headroom. At 3840x2160, all four settings presets clear the 60 FPS threshold, with Ultra averaging 83 FPS. The 2560x1440 resolution shows even stronger results, with Ultra at 124 FPS and Low reaching 225 FPS. At 1920x1080, the system delivers 163 FPS at Ultra and 296 FPS at Low.
The verdict by resolution confirms that every tested configuration is playable. There are no settings or resolutions where the frame rate falls below the 60 FPS playability threshold. The minimum measured frame rate across all tests was 92 FPS (4K Medium), which still provides a comfortable margin above the threshold.
Users with high refresh rate monitors will benefit most from this combination. At 1440p, the system can drive 124 FPS at Ultra settings, which suits 120 Hz displays. At 1080p, the 163 FPS at Ultra and 296 FPS at Low accommodate even 240 Hz panels, provided the display supports these refresh rates.
How This Combo Ranks
The AMD Ryzen 7 9800X3D and NVIDIA GeForce RTX 5090 D combination ranks 21st out of 3720 tested configurations for Control. This places the system in the top 0.6% of all benchmarked combinations, which is consistent with the absolute performance levels observed.
This ranking reflects the strength of both components. The CPU’s 87th percentile ranking among all processors and the GPU’s 92nd percentile ranking among all graphics cards combine to produce a system that sits near the apex of the benchmark database. The top 20 combinations ahead of this one likely feature more specialized or higher-clocked variants, but the practical difference in Control would be minimal given the game’s modest requirements relative to this hardware’s capabilities.
Measured FPS Breakdown
3840x2160:
- Low: 152 FPS average
- Medium: 108 FPS average, 92 FPS minimum, 124 FPS maximum
- High: 96 FPS average
- Ultra: 83 FPS average
2560x1440:
- Low: 225 FPS average
- Medium: 160 FPS average, 136 FPS minimum, 184 FPS maximum
- High: 142 FPS average
- Ultra: 124 FPS average
1920x1080:
- Low: 296 FPS average
- Medium: 211 FPS average, 180 FPS minimum, 243 FPS maximum
- High: 188 FPS average
- Ultra: 163 FPS average
The Medium preset is the only one with recorded minimum and maximum frame times, showing consistency across all resolutions: the minimums stay well above 60 FPS, with the lowest being 92 FPS at 4K. The frame time variance between minimum and maximum is tight, indicating stable performance without significant stuttering. The scaling between resolutions follows expected patterns, with 1080p providing roughly 1.5 to 2 times the frame rate of 4K at identical settings.