Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 41 | 47 | 53 | 74 |
| 1440p QHD | 60 | 69 | 78 | 110 |
| 1080p Full HD | 80 | 92 | 103 | 145 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 7 9700F and NVIDIA GeForce RTX 3060 Ti combination delivers a playable experience in Control at 1080p and 1440p, but 4K requires significant settings compromises. Benchmark data shows this pairing sits in the 49th percentile of tested combos for this title, with measured performance varying dramatically across the three resolutions tested.
Best Settings per Resolution
At 1920x1080, the system clears the 60 FPS threshold at every preset tested. The most demanding option, Ultra, produces an average of 80 FPS, making it the recommended setting for a fluid experience. High settings yield 92 FPS, while Medium reaches 103 FPS and Low peaks at 145 FPS. Since Ultra maintains an 80 FPS average, there is no reason to drop below it at this resolution.
Moving to 2560x1440, the picture changes slightly. Ultra runs at exactly 60 FPS on average, which meets the playability threshold but leaves no headroom for demanding scenes. High settings provide a more comfortable 69 FPS average. Medium runs at 78 FPS, and Low hits 110 FPS. The data confirms Ultra is technically playable at 1440p, but High is the safer choice if frame-time consistency matters.
At 3840x2160, the system struggles to maintain 60 FPS at most settings. Low is the only preset that clears the threshold, delivering 74 FPS on average. Medium falls to 53 FPS, High drops to 47 FPS, and Ultra bottoms out at 41 FPS. For 4K gaming, Low is the only viable setting for a 60 FPS experience, and even that preset shows the GPU is nearing its limit.
CPU and GPU Roles
The scaling between resolutions and presets indicates that the GPU is the dominant bottleneck in this configuration. At 1080p, dropping from Ultra to Low increases average FPS from 80 to 145, a 81% improvement that reflects the GPU's ability to push more frames when pixel shading demands decrease. At 1440p, the same preset drop moves from 60 to 110 FPS, an 83% gain. At 4K, the improvement is smaller in absolute terms but still substantial: Low runs at 74 FPS versus 41 FPS on Ultra, a 80% difference.
The CPU's role becomes more apparent at lower resolutions where the GPU has spare capacity. At 1080p Low, the system reaches 145 FPS, suggesting the Ryzen 7 9700F can feed the RTX 3060 Ti without holding it back. The 8-core, 16-thread processor with a 5.50 GHz boost clock provides ample single-thread performance for Control's engine, which does not heavily tax multi-core processors. The PassMark single-thread score of 4691 and multithread score of 36470 place this CPU in the 94th percentile of all processors, confirming it is not the limiting factor here.
At 4K, the GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth become the primary constraint. The jump from Medium to High at 4K costs 6 FPS (53 to 47), while the jump from High to Ultra costs another 6 FPS (47 to 41). This consistent degradation across presets points to raw shading throughput rather than memory capacity being the limiting factor, as the RTX 3060 Ti's 16.20 TFLOPS FP32 performance is simply insufficient for 4K Ultra in this title.
How This Combo Ranks
The AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 3060 Ti ranks 1848 out of 3720 tested combinations for Control. This places it in the middle of the pack, which aligns with the GPU's modest standing: the RTX 3060 Ti sits in the 59th percentile of all GPUs, while the CPU ranks in the 94th percentile. The combination's overall rank is dragged down by the GPU, which is the performance ceiling for this pairing.
The measured FPS data reinforces this ranking. At 1440p Ultra, the system produces exactly 60 FPS, which is the threshold for playability. This suggests the combo is positioned at the boundary of what is acceptable for modern action-adventure titles. At 1080p, the 80 FPS Ultra result places it comfortably ahead of lower-tier hardware, but the 4K results show it falls well behind high-end configurations that can maintain 60 FPS at Ultra settings.
Notably, the CPU's benchmark scores indicate it could support a more powerful GPU without becoming a bottleneck. The Ryzen 7 9700F's average benchmark score of 69996 is within 0.7% of the AMD Ryzen 9 7950X and within 0.2% of the Intel Core i7-14700KF, suggesting this processor has headroom for future GPU upgrades if the user chooses to pursue higher resolutions or refresh rates.
Similar Performance Alternatives
For the CPU, the nearest rivals are clustered within a tight performance band. The AMD Ryzen 9 7940HX scores 69875, just 0.2% below the Ryzen 7 9700F's 69996 average. The Intel Core i7-14700KF scores 70163, 0.2% higher. The AMD Ryzen 9 7950X scores 69515, 0.7% lower, and the Intel Core i7-14700K scores 69355, 0.9% lower. In practical terms, swapping to any of these processors would produce nearly identical frame rates in Control, as all four sit within a 0.9% performance envelope.
On the GPU side, the RTX 3060 Ti's nearest rivals show a similar pattern. The AMD Radeon RX 9060 scores 16014, just 0.7% lower than the RTX 3060 Ti's 16129 average. The AMD Radeon Pro 5600M scores 16351, 1.4% higher, and the AMD Radeon RX 5700 XT scores 16361, also 1.4% higher. The AMD Radeon R9 370X scores 15862, 1.7% lower. These deltas are small enough that users would not notice a difference in Control's frame rates when swapping between these GPUs. The RX 5700 XT, in particular, offers nearly identical performance to the RTX 3060 Ti, though it lacks ray tracing hardware that Control can utilize.
FAQ
Q: Can this PC run Control at 4K with maximum settings?
A: No. At 3840x2160 with Ultra settings, the system produces an average of 41 FPS, which falls well below the 60 FPS playability threshold. Even Medium settings only reach 53 FPS, so 4K gaming requires dropping to Low settings for a 74 FPS average.
Q: What is the best settings preset at 1440p?
A: Ultra settings run at exactly 60 FPS on average, which meets the playability threshold. However, High settings provide a 69 FPS average with more headroom, making it the safer choice for maintaining consistent frame times during intense combat sequences.
Q: Is the CPU or GPU more important for this game?
A: The GPU is the primary bottleneck. At 1080p, frame rates scale from 80 FPS at Ultra to 145 FPS at Low, a pattern that continues at higher resolutions. The Ryzen 7 9700F's strong benchmark scores, including a 4691 single-thread PassMark score, indicate it is not limiting performance in this title.
Q: How does the RTX 3060 Ti compare to the RX 5700 XT in this context?
A: The RX 5700 XT scores 16361 in average benchmark tests, which is 1.4% higher than the RTX 3060 Ti's 16129. In Control, users would see virtually identical frame rates, though the RTX 3060 Ti offers additional features like ray tracing and DLSS that the RX 5700 XT lacks.
Q: What frame rates can I expect at 1080p with High settings?
A: The system produces an average of 92 FPS at 1920x1080 with High settings. Medium settings run at 103 FPS, and Ultra runs at 80 FPS, so all presets at 1080p clear the 60 FPS threshold with room to spare.
Q: Does the combo rank in the top half of tested systems?
A: No. The combination ranks 1848 out of 3720 tested combos, placing it in the 49th percentile. This is consistent with the GPU's 59th percentile ranking, which is the limiting factor for this pairing.
The Verdict
The verdict by resolution is clear. At 1920x1080, this system runs Control flawlessly, with Ultra settings delivering an 80 FPS average. All four presets tested — Low at 145 FPS, Medium at 103 FPS, High at 92 FPS, and Ultra at 80 FPS — comfortably exceed the 60 FPS threshold. At 2560x1440, the system remains playable at all settings, though Ultra runs at exactly 60 FPS with no margin for error. High settings at 69 FPS are the recommended balance of visual quality and performance.
At 3840x2160, the system cannot maintain 60 FPS at Medium, High, or Ultra settings, producing 53, 47, and 41 FPS respectively. Low settings at 74 FPS are the only playable option, and even that preset requires a significant visual downgrade. The RTX 3060 Ti's 8 GB of GDDR6 memory and 16.20 TFLOPS of FP32 performance are insufficient for 4K rendering in this title at higher quality presets.
For gamers targeting 1080p or 1440p, this CPU-GPU combination is well-matched and delivers a smooth experience in Control. For 4K enthusiasts, the system falls short of the 60 FPS target unless visual fidelity is reduced to the lowest settings. The data suggests this pairing is best suited for 1080p Ultra or 1440p High gaming, where it provides a comfortable margin above the playability threshold.
Measured FPS Breakdown
At 1920x1080, the system delivers 145 FPS average on Low settings. Medium settings produce 103 FPS on average, with a minimum of 88 FPS and a maximum of 119 FPS. High settings average 92 FPS, and Ultra settings average 80 FPS. All presets maintain frame rates well above the 60 FPS playability threshold, with the minimum recorded frame rate across any preset being 88 FPS on Medium.
At 2560x1440, Low settings average 110 FPS. Medium settings produce 78 FPS on average, with a minimum of 66 FPS and a maximum of 90 FPS. High settings average 69 FPS, and Ultra settings average 60 FPS. The minimum recorded frame rate at 1440p is 66 FPS on Medium, which still clears the 60 FPS threshold, though Ultra's 60 FPS average leaves no headroom for frame drops.
At 3840x2160, Low settings average 74 FPS. Medium settings produce 53 FPS on average, with a minimum of 45 FPS and a maximum of 61 FPS. High settings average 47 FPS, and Ultra settings average 41 FPS. The minimum recorded frame rate at 4K is 45 FPS on Medium, which falls well below the playability threshold. Only Low settings at 4K maintain an average above 60 FPS, and even that preset shows the GPU operating near its performance ceiling.