Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

65%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
120 FPS
Ultra 1080p Measured
63 FPS

1440p (2K / QHD)

Low 1440p Measured
86 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
62 FPS
Ultra 4K Measured
32 FPS
13.3ms Frame Time
20ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 29,879
Graphics Card
Required 27,787
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 37 41 62
1440p QHD 50 59 66 86
1080p Full HD 63 75 86 120

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 75
1920x1080 Low 120
1920x1080 Medium 86
1920x1080 Ultra 63
2560x1440 High 59
2560x1440 Low 86
2560x1440 Medium 66
2560x1440 Ultra 50
3840x2160 High 37
3840x2160 Low 62
3840x2160 Medium 41
3840x2160 Ultra 32

Performance Analysis: Control on Your System

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 3060 Ti delivers a playable Control experience at 1080p and 1440p, but 4K requires a significant settings compromise. Benchmark data shows this combination ranks 2581 out of 3720 tested combos for this game, placing it in the lower-middle tier of systems. The measured FPS results reveal a clear pattern: the RTX 3060 Ti is the limiting factor at higher resolutions, while the Ryzen 7 5800XT provides ample headroom to push high frame rates at 1080p.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its strongest performance. With Low settings, the average frame rate reaches 119.8 FPS, nearly double the playable threshold. Medium settings still deliver a smooth 85.5 FPS average, while High settings produce 75.4 FPS. Even the most demanding Ultra preset maintains a comfortable 62.6 FPS average. The scaling from Low to Ultra shows a 47.7% performance drop (from 119.8 to 62.6 FPS), indicating that the GPU has enough resources at this resolution to handle even the heaviest visual effects without falling below 60 FPS.

Moving to 2560x1440, performance becomes more constrained. Low settings yield 86.3 FPS, which remains well above the 60 FPS target. Medium settings drop to 65.7 FPS, still playable but with less margin. High settings fall to 58.6 FPS, just below the 60 FPS threshold, making it technically unplayable by the benchmark standard. Ultra settings produce 50.0 FPS, a 20% reduction from High. The gap between Low and Ultra at 1440p is 42.1% (from 86.3 to 50 FPS), showing that resolution scaling taxes the GPU more heavily than at 1080p.

At 3840x2160, the RTX 3060 Ti struggles significantly. Low settings produce 62.3 FPS, barely clearing the playable threshold. Medium settings drop to 41.1 FPS, a 34% reduction from Low. High settings yield 37.3 FPS, and Ultra settings fall to 32.2 FPS. The performance curve at 4K is steep: from Low to Ultra, the system loses 48.3% of its frame rate. This indicates that 4K gaming with this GPU requires minimal graphical features to maintain playability, and even then the margin above 60 FPS is razor-thin at just 2.3 FPS.

The data includes no minimum or maximum frame rate values, so the analysis relies solely on average FPS metrics. The measured results show consistent scaling across resolutions, with each step up in resolution costing approximately 30-35% performance at equivalent settings.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which achieves an average of 62.6 FPS. This is the optimal configuration because it delivers the maximum visual fidelity while maintaining playability. The margin above the threshold is 2.6 FPS, which is tight but acceptable for average frame rates.

For 2560x1440, the best playable setting is Medium, averaging 65.7 FPS. High settings fall to 58.6 FPS, missing the 60 FPS target, so Medium represents the highest quality that remains playable. The 5.7 FPS margin above the threshold provides modest headroom for scene complexity variations.

At 3840x2160, only Low settings achieve playable performance, with an average of 62.3 FPS. This setting requires dropping nearly all graphical enhancements to stay above 60 FPS. The 2.3 FPS margin is minimal, meaning demanding scenes could potentially push the frame rate below the threshold.

Similar Performance Alternatives

The CPU and GPU each have nearby rivals that would produce nearly identical gaming behavior. For the AMD Ryzen 7 5800XT, the closest alternatives are the AMD Ryzen 7 7840H with an average score of 29868 (0% delta), the AMD Ryzen 7 8845HS at 29955 (-0.3% delta), and the AMD Ryzen 7 7840HS also at 29955 (-0.3% delta). The AMD Ryzen 5 9600X scores 29713 (0.6% delta), slightly behind. In practice, all four CPUs would deliver indistinguishable frame rates in Control, as the game's CPU demands are modest relative to these processors' capabilities.

For the NVIDIA GeForce RTX 3060 Ti, the nearest GPU rivals include the AMD Radeon RX 9060 with an average score of 16014 (0.7% delta), the AMD Radeon Pro 5600M at 16351 (-1.4% delta), and the AMD Radeon RX 5700 XT at 16361 (-1.4% delta). The AMD Radeon R9 370X scores 15862 (1.7% delta), slightly lower. Systems using any of these GPUs would show similar FPS patterns: strong 1080p performance, playable 1440p at medium settings, and 4K limited to low settings. The RX 5700 XT and Pro 5600M are nominally faster by 1.4%, which would translate to roughly 1-2 FPS difference in Control.

The Verdict

This PC can run Control with playable frame rates at all three tested resolutions, but the settings ceiling varies dramatically. At 1920x1080, the system clears 60 FPS at every preset, including Ultra at 62.6 FPS. This is the resolution where the hardware feels fully capable, offering smooth performance across the entire settings range.

At 2560x1440, the system remains playable but only up to Medium settings, which achieve 65.7 FPS. High settings at 58.6 FPS miss the 60 FPS target by 1.4 FPS, making Medium the practical ceiling. Users prioritizing visual quality over frame rate could tolerate High, but the benchmark data classifies it as unplayable.

At 3840x2160, the system barely achieves playability with Low settings at 62.3 FPS. The performance margin is extremely thin, and any demanding scene could drop below 60 FPS. Medium settings at 41.1 FPS and above are not viable for smooth gameplay.

Overall, the verdict is: this is a solid 1080p Ultra and 1440p Medium machine for Control, with 4K only possible at minimal settings and with no safety margin.

CPU and GPU Roles

The benchmark data reveals that the GPU is the dominant factor in determining Control's performance, especially at higher resolutions. The RTX 3060 Ti's percentile rank of 59 among all GPUs, combined with the CPU's 81st percentile rank, indicates the GPU is the weaker link in this pairing. The performance scaling across resolutions confirms this: at 1080p, the system maintains high frame rates even at Ultra, suggesting the CPU can feed the GPU sufficiently. At 1440p and 4K, the frame rates drop sharply, which is characteristic of GPU-bound scenarios.

The CPU's role becomes more apparent at lower resolutions and settings. At 1080p Low, the system reaches 119.8 FPS, approaching the limits of what the GPU can render. The Ryzen 7 5800XT's multi-threaded benchmark scores (e.g., Cinebench R23 multicore of 23794) indicate substantial headroom for the game's physics and AI workloads, which are not likely to bottleneck at these frame rates.

Comparing resolution scaling: from 1080p Low to 1440p Low, the frame rate drops from 119.8 to 86.3 FPS, a 28% reduction. From 1440p Low to 4K Low, it drops from 86.3 to 62.3 FPS, another 28% reduction. This consistent scaling suggests the GPU is the primary constraint at all resolutions, with the CPU maintaining sufficient performance. However, at 1080p Ultra, the frame rate of 62.6 FPS is close to the 1440p Medium result of 65.7 FPS, indicating that at lower resolutions, the GPU's render load is the limiting factor rather than the CPU.

The preset scaling at each resolution further confirms the GPU bottleneck. At 1080p, going from Low to Ultra costs 47.7% performance, while at 1440p it costs 42.1%, and at 4K it costs 48.3%. These similar percentages suggest the GPU is consistently the limiting factor across all settings, with the CPU never becoming a meaningful constraint in this game.

FAQ

Q: Can this system run Control at 60 FPS on Ultra settings at 1080p?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 62.6 FPS, which clears the 60 FPS playable threshold by 2.6 FPS.

Q: What is the highest playable setting at 1440p?

A: Medium settings at 2560x1440 achieve an average of 65.7 FPS, making it the most demanding preset that stays above 60 FPS. High settings fall to 58.6 FPS, below the threshold.

Q: Is 4K gaming viable with the RTX 3060 Ti in Control?

A: Only at Low settings, which produce 62.3 FPS at 3840x2160. Medium settings drop to 41.1 FPS, and Ultra produces 32.2 FPS, both unplayable.

Q: How does this system compare to one with an AMD Radeon RX 5700 XT?

A: The RX 5700 XT has an average benchmark score of 16361, which is 1.4% higher than the RTX 3060 Ti's 16129. In Control, this would translate to roughly 1 FPS difference at most settings, meaning identical playability classifications.

Q: Does the Ryzen 7 5800XT bottleneck the RTX 3060 Ti in this game?

A: No. The CPU's benchmark scores (81st percentile, Cinebench R23 multicore of 23794) are far higher than what Control requires. The frame rate scaling across resolutions indicates the GPU is the limiting factor in all tested scenarios.

Q: What frame rate can I expect at 1080p with Low settings?

A: The measured average is 119.8 FPS at 1920x1080 with Low settings, which is nearly double the playable threshold and indicates the GPU is not fully utilized at this configuration.