Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
124 FPS
Ultra 1080p Measured
68 FPS

1440p (2K / QHD)

Low 1440p Measured
94 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
63 FPS
Ultra 4K Measured
35 FPS
12.8ms Frame Time
19ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 29,879
Graphics Card
Required 27,787
Your GPU 17,083

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 40 45 63
1440p QHD 51 59 67 94
1080p Full HD 68 78 88 124

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 78
1920x1080 Low 124
1920x1080 Medium 88
1920x1080 Ultra 68
2560x1440 High 59
2560x1440 Low 94
2560x1440 Medium 67
2560x1440 Ultra 51
3840x2160 High 40
3840x2160 Low 63
3840x2160 Medium 45
3840x2160 Ultra 35

Performance Analysis: Control on Your System

Control is a demanding Action Adventure title, and the data for the AMD Ryzen 7 5800XT paired with the AMD Radeon RX 7600 XT shows a system that can handle the game, but the experience varies significantly depending on your chosen resolution and quality preset. The benchmark results indicate a clear scaling pattern where lower resolutions unlock high frame rates, while 4K pushes the GPU to its limits. This analysis breaks down the measured performance, the roles of the CPU and GPU, and what settings you should use to hit the 60 FPS threshold.

Measured FPS Breakdown

The measured FPS data provides a comprehensive look at how this combo performs across three resolutions and four quality presets. Starting at 3840x2160, the system delivers an average of 40 FPS on High settings, which falls short of the 60 FPS playable threshold. Dropping to Medium improves the average to 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS, indicating noticeable frame pacing variability. At Low settings, the average jumps to 63 FPS, finally crossing the playable line, while Ultra settings yield the lowest result at 35 FPS average. The gap between Low and Ultra at 4K is 28 FPS, showing that the graphical preset has a massive impact on performance at this resolution.

Moving to 2560x1440, the frame rates become more comfortable. High settings produce an average of 59 FPS, just one frame shy of the 60 FPS target. Medium settings achieve an average of 67 FPS, with a minimum of 57 FPS and a maximum of 76 FPS, providing a playable experience with some headroom. Low settings reach an average of 94 FPS, which is smooth and responsive, while Ultra settings drop to 51 FPS average, again below the threshold. The data shows that at 1440p, the system can handle Medium and Low presets comfortably, with High being borderline.

At 1920x1080, the system performs much stronger. Ultra settings produce an average of 68 FPS, which clears the 60 FPS threshold and makes this the most demanding playable preset at this resolution. High settings reach an average of 78 FPS, Medium hits 88 FPS with a minimum of 75 FPS and a maximum of 101 FPS, and Low settings achieve a high 124 FPS average. The scaling from Low to Ultra at 1080p is 56 FPS, demonstrating that even the most demanding settings are viable at this resolution. The minimum FPS values are only recorded for Medium presets across all resolutions, which suggests that the system maintains relatively stable frame times in other configurations, though the lack of data for High and Ultra makes direct comparisons of frame dips impossible.

CPU and GPU Roles

The benchmark results indicate that the GPU is the primary bottleneck for this game, especially at higher resolutions. The Ryzen 7 5800XT, with its 8 cores and 16 threads, provides ample processing power, as evidenced by its strong synthetic benchmarks including a Cinebench R23 multicore score of 23794 and a Passmark multithread score of 28053. However, the RX 7600 XT’s performance characteristics, such as its 16 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth, become the limiting factor as resolution increases.

Looking at the scaling between resolutions, the frame rates drop significantly when moving from 1920x1080 to 2560x1440 and then to 3840x2160. At Ultra settings, the average FPS goes from 68 at 1080p to 51 at 1440p, a 25% reduction, and then to 35 at 4K, another 31% reduction. This pattern is typical of a GPU-bound scenario, where the pixel throughput demand outpaces the GPU’s compute capabilities. The GPU’s FP32 performance of 22.57 TFLOPS and its 2048 shading units are responsible for rendering these pixels, and the data shows that they are insufficient for 4K Ultra but adequate for 1080p Ultra.

The CPU’s role becomes more apparent at lower resolutions and lower presets. At 1080p Low, the system achieves 124 FPS, which is likely where the CPU’s single-thread performance, with a 3DMark single-thread score of 959 and a Passmark single-thread score of 3535, starts to matter more. The Ryzen 7 5800XT’s boost clock of 4.80 GHz helps maintain high frame rates in less GPU-intensive scenarios. However, the GPU still dominates the overall performance envelope, as even at 1080p Medium, the average FPS of 88 is well below the CPU’s potential ceiling.

The preset scaling within each resolution further illustrates the GPU’s dominance. At 4K, moving from Low to Ultra reduces the average FPS from 63 to 35, a 44% performance drop. At 1440p, the drop from Low to Ultra is from 94 to 51 FPS, a 46% reduction. At 1080p, the drop is from 124 to 68 FPS, a 45% reduction. These consistent percentage drops across resolutions indicate that the GPU’s rendering workload scales predictably with quality settings, while the CPU maintains a stable foundation.

Similar Performance Alternatives

For the CPU, the nearest rivals provide a sense of what other processors would deliver similar performance. The AMD Ryzen 7 7840H has an average benchmark score of 29868, which is essentially identical to the Ryzen 7 5800XT’s average of 29879, with a deltaPct of 0. The AMD Ryzen 7 8845HS and the AMD Ryzen 7 7840HS both score 29955, which is 0.3% lower than the 5800XT. The AMD Ryzen 5 9600X scores 29713, which is 0.6% higher. These results suggest that any of these CPUs would provide nearly identical gameplay performance in Control, as the differences are within a fraction of a percent.

On the GPU side, the RX 7600 XT’s nearest rivals include some unexpected names. The NVIDIA GeForce GTX 690 has an average score of 17037, which is 0.3% higher than the RX 7600 XT’s 17083. The AMD Radeon HD 7970M scores 17019, which is 0.4% higher. The NVIDIA GeForce RTX 3070 scores 17208, which is 0.7% lower than the RX 7600 XT. The NVIDIA Tesla M4 scores 16932, which is 0.9% higher. While these rival GPUs are listed with similar benchmark scores, it is important to note that the GTX 690 and HD 7970M are older architectures, and their real-world performance in a game like Control may not match their synthetic scores. The RTX 3070, however, is a more modern card that would likely behave similarly in terms of frame rates, given the close deltaPct.

When considering alternative combinations, a user with a CPU from the 7840H or 8845HS family paired with an RTX 3070 would expect almost identical measured FPS in Control. The deltaPct values for both components are all under 1%, meaning that any of these pairings would produce results within a few frames of the Ryzen 7 5800XT and RX 7600 XT combo. The data does not support claims of meaningful performance differences among these alternatives.

The Verdict

The verdictByResolution data clearly states which configurations are playable, defined as maintaining an average FPS of 60 or higher. At 3840x2160, the only playable setting is Low, which achieves an average of 63 FPS. Medium, High, and Ultra all fall below the threshold, with averages of 45, 40, and 35 FPS respectively. This means that 4K gaming is only feasible with significant visual compromises, and even then, the frame rate is barely above the minimum target.

At 2560x1440, the playable settings are Low and Medium, with averages of 94 and 67 FPS respectively. High settings are essentially at the threshold with 59 FPS, but since it does not meet the 60 FPS requirement, it is not listed as playable. Ultra settings at 51 FPS are not playable. This resolution offers a good balance, allowing for Medium settings with a comfortable margin above the threshold.

At 1920x1080, all four settings are playable. Ultra achieves 68 FPS, High reaches 78 FPS, Medium hits 88 FPS, and Low delivers 124 FPS. This is the resolution where the system shines, providing a fully playable experience even at maximum quality settings. The data confirms that this PC can run Control effectively, but the user must adjust expectations based on their display resolution.

Best Settings per Resolution

For each resolution, the best settings are defined as the most demanding preset that stays at or above 60 FPS. At 3840x2160, the best settings are Low, which produce an average of 63 FPS. This is the only setting that clears the threshold, and it does so with just a 3 FPS margin. Users at 4K should be prepared for a visually reduced experience.

At 2560x1440, the best settings are Medium, which produce an average of 67 FPS. This provides a better visual experience than Low while still maintaining a playable frame rate. The minimum FPS of 57 does dip below 60, but the average is above the threshold, making it the recommended choice. High settings at 59 FPS are close, but the average does not meet the requirement.

At 1920x1080, the best settings are Ultra, which produce an average of 68 FPS. This is the highest quality preset available, and it achieves a playable frame rate with an 8 FPS margin. This is the ideal configuration for users with 1080p displays, as they can enjoy the game at its maximum visual fidelity without sacrificing smoothness. The measured FPS for Ultra at 1080p does not include min or max values, but the average indicates a stable enough experience.

How This Combo Ranks

The comboRankInGame places this specific combination of the AMD Ryzen 7 5800XT and the AMD Radeon RX 7600 XT at rank 2363 out of 3720 tested combos. This puts it in the lower-middle portion of the ranking, meaning that a majority of other tested systems deliver better performance in Control. The percentile data for the individual components supports this: the CPU is in the 81st percentile of all CPUs, which is strong, but the GPU is only in the 60th percentile of all GPUs, which is below average.

The ranking suggests that while the CPU is more than capable, the GPU holds this combo back. The RX 7600 XT’s Passmark G3D score of 17132 and its 3DMark Steel Nomad DX12 score of 2348 are moderate, and they reflect its position in the GPU hierarchy. In a game like Control, which relies heavily on GPU rendering, this combo will not compete with systems using higher-tier GPUs. The rank of 2363 out of 3720 means that roughly 63% of tested combinations outperform this one in terms of raw frame rates.

However, the ranking does not account for resolution or settings. At 1080p Ultra, this combo still achieves 68 FPS, which is a playable result. The rank is a holistic measure across all tested configurations, many of which may use more powerful GPUs. For a user with a 1080p or 1440p display, this combo offers a capable experience, but for 4K enthusiasts, it is not a top-tier performer. The data shows that the Ryzen 7 5800XT’s strong multi-threaded performance, with a Passmark multithread score of 28053 and a 3DMark max threads score of 7680, is wasted to some extent in this pairing, as the GPU becomes the limiting factor in most scenarios.