Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
226 FPS
Ultra 1080p Measured
124 FPS

1440p (2K / QHD)

Low 1440p Measured
171 FPS
Ultra 1440p Measured
94 FPS

4K (Ultra HD)

Low 4K Measured
115 FPS
Ultra 4K Measured
63 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 25,005
Graphics Card
Required 27,787
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 63 73 82 115
1440p QHD 94 108 121 171
1080p Full HD 124 143 161 226

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 143
1920x1080 Low 226
1920x1080 Medium 161
1920x1080 Ultra 124
2560x1440 High 108
2560x1440 Low 171
2560x1440 Medium 121
2560x1440 Ultra 94
3840x2160 High 73
3840x2160 Low 115
3840x2160 Medium 82
3840x2160 Ultra 63

Performance Analysis: Control on Your System

The AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 4070 Ti delivers a robust Control experience across all tested resolutions, with the data showing that every preset at every resolution clears the 60 FPS playable threshold. The measured frame rates indicate a system that is not merely adequate but consistently fast, with the most demanding configuration at 4K still holding an average of 63 FPS. This analysis breaks down the exact measured performance, contextualizes it against other tested combos, and identifies the specific roles each component plays in producing these results.

Measured FPS Breakdown

The measured FPS data for Control spans three resolutions and four quality presets, with complete average figures and full min/max data only recorded for the Medium preset. At 1920x1080, the lowest resolution tested, the system shows substantial headroom. The Low preset produces an average of 226 FPS, while High reaches 143 FPS. The Medium preset, which includes full min/max measurements, averages 161 FPS with a minimum of 136 FPS and a maximum of 185 FPS. Ultra settings at 1080p yield an average of 124 FPS, which is still more than double the 60 FPS playable threshold.

Moving to 2560x1440, the performance scales predictably with the increased pixel count. Low settings average 171 FPS, High settings average 108 FPS, and Ultra settings average 94 FPS. The Medium preset at this resolution averages 121 FPS, with a recorded minimum of 103 FPS and a maximum of 140 FPS. The min FPS at Medium 1440p remains far above the playable threshold, indicating consistent frame delivery even during demanding scenes.

At 3840x2160, the highest resolution tested, the system remains comfortably playable. Low settings average 115 FPS, Medium averages 82 FPS, and High averages 73 FPS. The Medium preset at 4K shows a minimum of 70 FPS and a maximum of 94 FPS, meaning the worst-case frame rate still exceeds the 60 FPS threshold by a clear margin. Ultra settings at 4K produce an average of 63 FPS, which sits just above the playable mark.

The pattern across all resolutions shows that the gap between Low and Ultra settings narrows as resolution increases. At 1080p, the difference between Low (226 FPS) and Ultra (124 FPS) is 102 FPS. At 1440p, that gap compresses to 77 FPS (171 FPS vs 94 FPS). At 4K, the difference is 52 FPS (115 FPS vs 63 FPS). This scaling suggests that at higher resolutions, the GPU workload grows more dominant, reducing the relative impact of graphics settings on overall frame rate.

How This Combo Ranks

The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 4070 Ti combination ranks 496th out of 3720 tested combos for Control, placing it in the top 13.3 percent of all configurations in the database. This percentile ranking reflects the strength of the RTX 4070 Ti, which itself sits at the 84th percentile among all GPUs, while the Ryzen 5 8400F holds the 77th percentile among all CPUs.

The GPU's benchmark data reinforces this high placement. The RTX 4070 Ti achieves a PassMark G3D score of 31624 and a Geekbench Vulkan score of 213808, with a 3DMark Steel Nomad DX12 score of 5024. These figures position the GPU well above the median, explaining why the combo ranks so highly in a game like Control that leans heavily on graphics processing.

The CPU's synthetic benchmarks show a balanced profile. The Ryzen 5 8400F scores 20851 in Cinebench R23 multi-core and 2943 in single-core, with a 3DMark max threads score of 6165. These numbers indicate a processor capable of feeding the GPU without becoming a bottleneck, which is consistent with the high frame rates observed across all resolution and settings combinations.

Best Settings per Resolution

At each resolution, the best settings are defined as the most demanding preset that maintains an average of at least 60 FPS. The data shows that the system reaches Ultra settings at every resolution, with no compromise required.

At 1920x1080, Ultra settings produce an average of 124 FPS, which is the highest quality preset available. The performance headroom is substantial, as even the most demanding settings leave more than 60 FPS of buffer above the playable threshold.

At 2560x1440, Ultra settings also deliver the best experience, with an average of 94 FPS. This configuration provides the full visual fidelity of Control while maintaining a frame rate that is smooth for high-refresh-rate monitors and entirely free of playability concerns.

At 3840x2160, Ultra settings achieve an average of 63 FPS, which is the most demanding preset that stays above the 60 FPS threshold. The margin is narrow — just 3 FPS above the cutoff — but the average indicates that the system can handle maximum quality at 4K. The Medium preset at this resolution, with its measured minimum of 70 FPS, offers a safer choice for players who prioritize frame rate consistency over absolute visual quality.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 8400F provide context for CPU-bound scenarios. The AMD Ryzen 5 7500F has an average benchmark score of 24964, which is 0.2 percent lower than the 8400F's 25005. The Intel Core i7-11850H scores 24935, a 0.3 percent deficit, while the Intel Core i7-13620H scores 24911, a 0.4 percent deficit. On the higher side, the AMD EPYC 9474F scores 25103, which is 0.4 percent above the 8400F. These deltas are minimal, meaning that swapping the 8400F for any of these CPUs would produce nearly identical performance in Control.

For the GPU, the NVIDIA GeForce RTX 4070 Ti has an average benchmark score of 44795. The NVIDIA GeForce RTX 5090 Mobile scores 45152, which is 0.8 percent higher. The AMD Radeon Pro 5500 XT scores 45384, 1.3 percent higher, and the Intel Arc A730M scores 45592, 1.7 percent higher. The NVIDIA RTX A6000 scores 44075, which is 1.6 percent lower than the 4070 Ti. These small percentage differences suggest that any of these GPUs would deliver frame rates within a few percent of the measured results.

In practical terms for Control, the CPU alternatives would show virtually no difference because the game is primarily GPU-bound at the tested settings. The GPU alternatives would shift frame rates by single-digit percentages, meaning a player could expect results within roughly 1-2 FPS of the measured averages in most cases.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component dominates at each setting. At 1920x1080, the CPU's role is more pronounced. The difference between Low and Ultra is 102 FPS, and the absolute frame rates are high enough (226 FPS at Low) that the CPU's ability to feed draw calls becomes relevant. The Ryzen 5 8400F's single-thread performance, as indicated by its Cinebench R23 single-core score of 2943, supports these high frame rates without becoming a limiting factor.

As resolution increases, the GPU's workload expands and the CPU's influence diminishes. At 2560x1440, the frame rates across all presets are lower than at 1080p, but the relative performance drops are consistent. At 3840x2160, the GPU is clearly the dominant component. The 4K Low preset averages 115 FPS, while Ultra averages 63 FPS — a 52 FPS spread that is driven almost entirely by GPU fill rate and shading capacity.

The RTX 4070 Ti's specifications support this analysis. With 7680 shading units, 240 texture mapping units, and 80 raster output units, the GPU has substantial raw throughput. Its 12 GB of GDDR6X memory with 504.2 GB/s bandwidth provides ample capacity for 4K textures. The pixel rate of 208.8 GPixel/s and texture rate of 626.4 GTexel/s explain why the GPU can maintain 63 FPS at 4K Ultra despite the demanding rendering load.

The CPU's 6-core, 12-thread configuration with a boost clock of 4.70 GHz is sufficient for Control's threading model. The game's action-adventure genre typically uses a limited number of threads, and the 8400F's single-thread performance, evidenced by its PassMark single-thread score of 3685, ensures that even at 1080p Low with 226 FPS, the CPU does not bottleneck the GPU.

FAQ

Q: Can this PC run Control at 4K Ultra settings?

A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 63 FPS, which exceeds the 60 FPS playable threshold. This is the most demanding configuration tested, and it remains playable.

Q: What is the best settings preset at 2560x1440?

A: Ultra settings are the best choice at 1440p, producing an average of 94 FPS. This is the highest quality preset and maintains a frame rate well above the 60 FPS threshold.

Q: How does the RTX 4070 Ti compare to its nearest GPU rivals in synthetic benchmarks?

A: The RTX 4070 Ti has an average benchmark score of 44795. The RTX 5090 Mobile is 0.8 percent higher, the Radeon Pro 5500 XT is 1.3 percent higher, and the Intel Arc A730M is 1.7 percent higher. The RTX A6000 is 1.6 percent lower.

Q: Is the CPU or GPU more important for Control at 4K?

A: The GPU is the dominant component at 3840x2160. The frame rate spread between Low (115 FPS) and Ultra (63 FPS) at 4K is 52 FPS, which is driven by GPU workload. The CPU's influence is more apparent at 1080p, where frame rates reach 226 FPS at Low settings.

Q: What is the minimum FPS recorded at Medium settings across all resolutions?

A: At 1920x1080 Medium, the minimum is 136 FPS. At 2560x1440 Medium, the minimum is 103 FPS. At 3840x2160 Medium, the minimum is 70 FPS. All of these exceed the 60 FPS playable threshold.

Q: How does the Ryzen 5 8400F compare to the Ryzen 5 7500F?

A: The Ryzen 5 8400F has an average benchmark score of 25005, while the Ryzen 5 7500F scores 24964. This represents a 0.2 percent difference, meaning the two CPUs perform nearly identically in synthetic tests.

The Verdict

The data clearly indicates that the AMD Ryzen 5 8400F and NVIDIA GeForce RTX 4070 Ti combination can run Control with excellent performance at every resolution and preset tested. At 1920x1080, Ultra settings average 124 FPS, providing a high-refresh-rate experience with maximum visual quality. At 2560x1440, Ultra settings average 94 FPS, which is ideal for 1440p gaming with full detail. At 3840x2160, Ultra settings average 63 FPS, clearing the 60 FPS threshold by a small but definitive margin.

The verdict by resolution confirms that all playable settings lists include every preset — Low, Medium, High, and Ultra — at each of the three resolutions. The best settings designation is Ultra at every resolution, with average FPS values of 124 at 1080p, 94 at 1440p, and 63 at 4K. For players who prefer maximum frame rate stability, the Medium preset at 4K offers a minimum of 70 FPS, providing additional headroom over the 60 FPS threshold. This system is fully capable of running Control at its highest settings across the board, with no resolution requiring a compromise in visual quality to maintain playability.