Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 54 | 60 | 85 |
| 1440p QHD | 69 | 79 | 89 | 126 |
| 1080p Full HD | 91 | 105 | 118 | 166 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 3070 Ti combination ranks in the 1339th position out of 3720 tested combos for Control, placing it in the top 36% of all systems evaluated. This is a solid mid-to-upper tier standing, indicating that the pairing delivers well above the median experience for this title, though it does not reach the upper echelon of performance reserved for flagship hardware.
How This Combo Ranks
The combo’s rank of 1339 out of 3720 places it comfortably in the upper third of all tested configurations. In practical terms, this means the system outperforms roughly two-thirds of the hardware combinations in the database when running Control. The CPU sits at the 77th percentile among all processors, while the GPU holds the 75th percentile among all graphics cards, so both components are individually above average. When paired, they produce a balanced system where neither part is dramatically holding back the other in this game. The data shows that this is not a top-tier enthusiast setup, but it is far from a compromise build; it sits in the sweet spot where capable 1440p gaming and respectable 4K performance are both achievable.
CPU and GPU Roles
Benchmark results indicate that the GPU is the dominant factor for Control at higher resolutions, while the CPU becomes more relevant at lower settings and resolutions. At 3840x2160, the frame rates scale dramatically with graphical settings: the average FPS drops from 85 on Low to 60 on Medium, then to 54 on High, and finally to 47 on Ultra. This steep decline—a 38 FPS swing from Low to Ultra—demonstrates that the RTX 3070 Ti’s rendering throughput is the primary constraint at 4K. The CPU’s role is minimized here because the GPU is fully saturated with pixel work.
At 2560x1440, the same pattern holds but with more headroom. Average FPS ranges from 126 on Low down to 69 on Ultra, a 57 FPS spread. The GPU still governs performance, but the system has enough spare capacity that even Ultra settings remain comfortably above the 60 FPS threshold. At 1920x1080, the CPU begins to show its influence. The average FPS on Low is 166, which is high enough that the Ryzen 5 8400F’s single-thread performance (3DMark single-thread score of 951) starts to matter more relative to the GPU. The gap between Low and Ultra is 75 FPS (166 vs 91), showing that while the GPU still drives the frame rate, the CPU’s 6-core/12-thread configuration with a 4.70 GHz boost clock is sufficient to feed the GPU without becoming a bottleneck even at the lowest settings.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the AMD Ryzen 5 7500F is the closest match, with an average benchmark score of 24964 compared to the 8400F’s 25005, a negligible 0.2% difference. The Intel Core i7-11850H (24935, 0.3% slower) and Intel Core i7-13620H (24911, 0.4% slower) are also effectively identical in overall CPU performance. The AMD EPYC 9474F scores 25103, which is 0.4% higher, but that is a server-grade chip and not a realistic desktop alternative. For gaming, any of these CPUs would deliver indistinguishable frame rates in Control, as the differences are within measurement noise.
On the GPU side, the NVIDIA GeForce RTX 5070 Mobile is the nearest rival with an average score of 29928, just 0.1% below the RTX 3070 Ti’s 29945. The AMD Radeon RX 6800 scores 30095, which is 0.5% higher, making it a marginally faster alternative. The NVIDIA GeForce RTX 2080 Ti (29783, 0.5% lower) and AMD Radeon RX 6700 (30433, 1.6% higher) round out the comparison group. For Control specifically, a system with an RX 6800 or RX 6700 would produce very similar FPS numbers, likely within 1-2 frames at each resolution and preset. The RTX 2080 Ti, despite being an older architecture, would also behave nearly identically in this game.
The Verdict
Yes, this PC can run Control, and it does so with authority at most resolutions. The verdict by resolution is clear: at 1920x1080, all four tested presets (Low, Medium, High, Ultra) are playable, with the best experience at Ultra averaging 91 FPS. At 2560x1440, all presets also clear the 60 FPS threshold, with Ultra averaging 69 FPS—a solid target for high-refresh-rate monitors. At 3840x2160, the system becomes more selective: Low and Medium are playable (85 and 60 FPS respectively), but High (54 FPS) and Ultra (47 FPS) fall below the 60 FPS playability threshold. For 4K gaming, the recommended approach is to stick with Medium settings, which deliver exactly 60 FPS on average with a minimum of 51 and maximum of 69. This makes the combo a strong 1080p and 1440p performer, and a viable 4K option only when settings are moderated.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest performance. On Low settings, the average FPS is 166, providing an extremely smooth experience for fast-paced action. Medium settings yield 118 FPS average with a minimum of 101 and maximum of 136, which is still excellent for high-refresh displays. High settings produce 105 FPS average, and Ultra settings drop to 91 FPS average. All of these are well above the 60 FPS threshold, and even the lowest recorded minimum (101 FPS on Medium) is far above playable.
At 2560x1440, performance remains strong. Low settings average 126 FPS, Medium averages 89 FPS (minimum 76, maximum 103), High averages 79 FPS, and Ultra averages 69 FPS. The minimum frame rates are not listed for Low, High, and Ultra, but the Medium preset’s minimum of 76 FPS suggests that even the most demanding scenes will stay smooth. The Ultra preset’s 69 FPS average is the only number that approaches the 60 FPS line, but it still clears it by a comfortable margin.
At 3840x2160, the picture changes. Low settings average 85 FPS, which is playable. Medium settings average exactly 60 FPS, with a minimum of 51 and maximum of 69—this is the borderline case where occasional dips below 60 may occur in heavy scenes, but the average is right at the threshold. High settings average 54 FPS, which is below the playability line, and Ultra averages 47 FPS, which is noticeably less smooth. For 4K users, the data suggests that Medium is the maximum viable setting, and even then, some frame rate variability should be expected.
FAQ
Q: Can this system run Control at 4K with high settings?
A: No. At 3840x2160 with High settings, the average FPS is 54, which falls below the 60 FPS playability threshold. Ultra settings are worse at 47 FPS average. Only Low (85 FPS) and Medium (60 FPS) presets are playable at 4K.
Q: What is the best settings preset for 1440p gaming?
A: At 2560x1440, all four presets are playable, but Ultra is the best choice with an average of 69 FPS. This provides the highest visual quality while still maintaining a frame rate above the 60 FPS threshold.
Q: How does the CPU compare to its closest rival, the Ryzen 5 7500F?
A: The Ryzen 5 8400F has an average benchmark score of 25005, which is 0.2% higher than the Ryzen 5 7500F’s 24964. In practical terms, there is no meaningful performance difference between them for gaming.
Q: Is the RTX 3070 Ti significantly faster than the RTX 2080 Ti?
A: No. The RTX 3070 Ti’s average benchmark score is 29945, while the RTX 2080 Ti scores 29783. This is a 0.5% difference, meaning the two cards deliver nearly identical performance in Control.
Q: What frame rate can I expect at 1080p with Medium settings?
A: At 1920x1080 with Medium settings, the average FPS is 118, with a minimum of 101 and a maximum of 136. This is a very smooth experience suitable for high-refresh-rate monitors.
Q: Does the system maintain 60 FPS at 4K with Medium settings?
A: Yes, but just barely. The average FPS is exactly 60, with a minimum of 51 and maximum of 69. This means most of the time it will be at or above 60 FPS, but there will be occasional dips below the threshold in demanding scenes.