Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 40 | 46 | 61 |
| 1440p QHD | 47 | 58 | 64 | 88 |
| 1080p Full HD | 66 | 77 | 87 | 117 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 5 8400F paired with the NVIDIA GeForce RTX 3060 Ti delivers a highly variable experience in Control, depending entirely on the resolution and quality preset selected. The measured data shows that this combination is capable of clearing the 60 FPS threshold at 1080p with all presets, but only at the lowest settings when pushing to 4K. Across the board, the pattern is clear: the GPU becomes the limiting factor as resolution climbs, while the CPU's 6-core/12-thread Zen 4 architecture keeps frame rates stable at lower resolutions. This analysis breaks down the exact numbers from the benchmark database, explains what they mean for playability, and compares the combo against similarly performing hardware.
Measured FPS Breakdown
At 1920x1080, the combination performs comfortably above the 60 FPS playability threshold in every tested preset. With Low settings, the average frame rate reaches 117 FPS, which is the highest figure recorded for this combo in any configuration. Moving to Medium, the average drops to 86.8 FPS, still a strong margin above the threshold. High settings yield 77 FPS on average, while Ultra—the most demanding preset—maintains an average of 66.4 FPS. The scaling from Low to Ultra represents a 43% reduction in average frame rate, yet even the worst-case Ultra preset clears the 60 FPS mark by more than 6 frames.
At 2560x1440, the picture becomes more nuanced. Low settings produce an average of 87.7 FPS, which is a 25% drop from the 1080p Low result, but it remains well above the threshold. Medium settings average 63.9 FPS, just barely clearing 60 FPS. High settings fall to 57.5 FPS on average, which is below the 60 FPS playability line. Ultra settings at 1440p average 47.1 FPS, representing a 46% performance loss compared to the 1080p Ultra result. The gap between Low and Ultra at 1440p is 40.6 FPS, indicating that the GPU's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are increasingly stressed as quality increases.
At 3840x2160, only the Low preset achieves an average above 60 FPS, hitting 61.1 FPS. This is a marginal pass, with less than 2 FPS of headroom. Medium settings average 45.5 FPS, High settings average 40 FPS, and Ultra averages just 33.2 FPS. The progression from Low to Ultra at 4K shows a 46% performance drop, mirroring the scaling seen at 1440p. Notably, the 4K Low result is only 3 FPS slower than the 1440p High result, which suggests that the resolution increase from 1440p to 4K costs roughly the same performance as moving from High to Medium settings at the same resolution.
The data shows no min or max frame rate values, so the analysis relies solely on averages. However, the consistent scaling between presets and resolutions indicates that the RTX 3060 Ti's 16.20 TFLOPS of FP32 compute and 253.1 GTexel/s texture rate are the primary drivers of performance, with the CPU's 4.20 GHz base clock and 4.70 GHz boost clock providing sufficient headroom at 1080p and 1440p.
FAQ
*Q: Can this PC run Control at 1080p with Ultra settings?*
A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 66.4 FPS, which clears the 60 FPS playability threshold by 6.4 frames. This is the most demanding preset at 1080p, and it remains playable.
Q: What is the best playable setting at 1440p?
A: At 2560x1440, Medium settings are the most demanding preset that stays above 60 FPS, averaging 63.9 FPS. High settings drop to 57.5 FPS, which falls below the playability threshold.
Q: Is 4K gaming viable with this combo?
A: Only at the lowest preset. At 3840x2160, Low settings average 61.1 FPS, just barely above the 60 FPS threshold. Medium settings average 45.5 FPS, which is not playable by the 60 FPS standard.
Q: How does the CPU compare to its nearest rival?
A: The AMD Ryzen 5 8400F has an average benchmark score of 25005, which is 0.2% higher than the AMD Ryzen 5 7500F (24964) and 0.4% higher than the Intel Core i7-13620H (24911). It also sits 0.4% below the AMD EPYC 9474F (25103).
Q: What is the GPU's percentile ranking?
A: The NVIDIA GeForce RTX 3060 Ti ranks in the 59th percentile among all GPUs, with an average benchmark score of 16129. Its nearest rival, the AMD Radeon RX 9060, scores 16014, which is 0.7% lower.
Q: Does the combo rank high among tested configurations?
A: The combo ranks 2527 out of 3720 tested combinations in Control, placing it in the lower half of the database. This rank reflects the GPU's mid-tier position rather than a CPU limitation, as the CPU's 77th percentile ranking is notably higher.
Similar Performance Alternatives
For the CPU, the AMD Ryzen 5 8400F's nearest rivals are all within a 0.4% delta in average benchmark score. The AMD Ryzen 5 7500F scores 24964 (0.2% lower), making it a nearly identical match in synthetic tests. The Intel Core i7-11850H scores 24935 (0.3% lower), while the Intel Core i7-13620H scores 24911 (0.4% lower). On the higher side, the AMD EPYC 9474F scores 25103 (0.4% higher). For Control, any of these CPUs would deliver essentially the same frame rates when paired with the RTX 3060 Ti, as the game's performance at higher resolutions is dominated by the GPU.
For the GPU, the RTX 3060 Ti's nearest rivals show a wider spread. The AMD Radeon RX 9060 scores 16014 (0.7% lower), the AMD Radeon Pro 5600M scores 16351 (1.4% higher), and the AMD Radeon RX 5700 XT scores 16361 (1.4% higher). The AMD Radeon R9 370X scores 15862 (1.7% lower). In practical terms, swapping the RTX 3060 Ti for any of these cards would produce frame rates within a few FPS of the measured results. For instance, the RX 5700 XT's 1.4% higher score would likely push the 1440p High average from 57.5 FPS to roughly 58.3 FPS, which still falls short of 60 FPS. Conversely, the R9 370X's 1.7% lower score would drop the 1080p Ultra average from 66.4 FPS to approximately 65.3 FPS, still playable.
The data indicates that this CPU-GPU pairing sits in a crowded performance tier. The CPU's 77th percentile ranking versus the GPU's 59th percentile suggests that the RTX 3060 Ti is the bottleneck in most scenarios, particularly at 1440p and 4K where the GPU's 8 GB memory capacity is tested.
The Verdict
The verdict is straightforward based on the measured data. At 1920x1080, all four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, meaning this PC can run Control at maximum quality with an average of 66.4 FPS. At 2560x1440, only Low and Medium presets are playable, with Medium averaging 63.9 FPS as the best option. High and Ultra fall to 57.5 FPS and 47.1 FPS respectively, both below the playability line. At 3840x2160, only Low settings achieve 61.1 FPS on average, making it the sole playable preset at 4K.
This combo is therefore a solid 1080p machine for Control, a capable 1440p machine with settings compromises, and a marginal 4K machine that requires the lowest quality settings. The 60 FPS threshold is the reference point, and the data shows that the RTX 3060 Ti cannot sustain it at higher presets beyond 1080p.
How This Combo Ranks
The combo ranks 2527 out of 3720 tested combinations in Control, placing it in the 32nd percentile of all tested systems. This ranking is below the midpoint, which aligns with the GPU's 59th percentile standing among all GPUs. The CPU's 77th percentile ranking suggests that a stronger GPU would yield a much higher combo rank, as the Ryzen 5 8400F is not the limiting factor in most scenarios. The ranking also reflects the game's demands: Control is an action-adventure title with heavy real-time effects, and the RTX 3060 Ti's 8 GB memory and 16.20 TFLOPS compute are mid-range by current standards. For comparison, the combo's rank is lower than the CPU's individual percentile, indicating that the GPU drags the overall score down relative to other tested systems that pair higher-end GPUs with similarly capable CPUs.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 66.4 FPS. This is the highest quality option available and provides 6.4 FPS of headroom. At 2560x1440, the best settings are Medium, averaging 63.9 FPS. This preset offers a balance of visual quality and performance, with 3.9 FPS of headroom above the threshold. At 3840x2160, the best settings are Low, averaging 61.1 FPS. This is the only playable preset at 4K, with just 1.1 FPS of headroom, meaning any scene complexity could push it below 60 FPS.
The progression shows a clear pattern: each resolution step down allows for one additional preset tier. At 1080p, Ultra is playable. At 1440p, Medium is the ceiling. At 4K, Low is the only option. This scaling suggests that the RTX 3060 Ti's performance scales roughly linearly with pixel count, but the quality preset has a compounding effect. For example, dropping from Ultra to Low at 1080p increases FPS by 76%, while the same preset drop at 4K increases FPS by 84%, indicating that the GPU is more sensitive to quality settings at higher resolutions.
CPU and GPU Roles
The data reveals a clear division of labor between the CPU and GPU at different resolutions. At 1920x1080, the CPU's 6 cores and 12 threads, with a boost clock of 4.70 GHz, are sufficient to feed the GPU in all presets. The frame rate scales from 117 FPS at Low to 66.4 FPS at Ultra, which translates to a 43% drop. This scaling is almost entirely attributable to the GPU's workload, as the CPU's single-thread performance (Cinebench R23 single-core score of 2943) does not bottleneck at these frame rates.
At 2560x1440, the GPU becomes the dominant factor. The average FPS drops by 25% from 1080p at Low settings, but the gap between Low and Ultra at 1440p is 40.6 FPS, which is nearly identical to the 50.6 FPS gap at 1080p. This indicates that the CPU is still keeping up, but the GPU's 8 GB memory and 448.0 GB/s bandwidth are being pushed harder. The 1440p High preset at 57.5 FPS is 19.4 FPS lower than the 1080p High result, showing a resolution penalty of roughly 25%.
At 3840x2160, the GPU's limitations are fully exposed. The 4K Low result of 61.1 FPS is 47.8% lower than the 1080p Low result, and the 4K Ultra result of 33.2 FPS is 50% lower than the 1080p Ultra result. The CPU's role is minimal here, as the frame rates are low enough that even the Ryzen 5 8400F's mid-range 3DMark scores (6091 for 16 threads, 951 for single thread) are not the bottleneck. The scaling between resolutions—from 117 FPS at 1080p Low to 61.1 FPS at 4K Low—shows a 47.8% drop, which is consistent with the pixel count increase from 2.07 million to 8.29 million pixels, representing a 4x increase in workload. The GPU's 16.20 TFLOPS of FP32 compute is simply insufficient for higher presets at 4K.
In summary, the CPU is more than adequate for this game at all resolutions, while the GPU determines playability. At 1080p, the RTX 3060 Ti provides a fully playable experience at any preset. At 1440p, the GPU's mid-range performance limits users to Medium settings. At 4K, the GPU's 8 GB memory and compute capabilities only allow Low settings, and even then with minimal headroom. The combination works best as a 1080p gaming system, with 1440p as a viable option with reduced quality, and 4K as a technically playable but visually compromised experience.