Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 31 | 38 | 46 |
| 1440p QHD | 40 | 49 | 55 | 75 |
| 1080p Full HD | 52 | 61 | 71 | 97 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
How This Combo Ranks
The AMD Ryzen 5 8400F paired with the NVIDIA GeForce GTX 1070 ranks 3061 out of 3720 tested combos in the database for Control. That places this configuration in the lower-mid portion of all recorded combinations, meaning a large share of tested systems deliver higher average frame rates. The ranking reflects the GPU's age and class more than the CPU's capability; the GTX 1070 sits at the 47th percentile among all GPUs, while the Ryzen 5 8400F reaches the 77th percentile among all CPUs. The data indicates a notable imbalance: the processor is substantially stronger than the graphics card for this title, and the overall combo rank is dragged down by the GPU's performance ceiling.
CPU and GPU Roles
Benchmark results across resolutions show a clear pattern: the GTX 1070 is the limiting factor at every setting level. At 1920x1080, the gap between Low and Ultra settings is 45 FPS (96.9 down to 51.9), which is a 46% drop. At 2560x1440, the same settings spread is 35 FPS (74.7 down to 39.7), a 47% reduction. At 3840x2160, the spread narrows to 17.8 FPS (46.4 down to 28.6), a 38% decline. This consistent scaling with settings indicates the GPU's shading units, texture units, and memory bandwidth are being saturated as load increases.
Resolution scaling further confirms the GPU bottleneck. Dropping from 1080p to 1440p at High settings reduces average FPS from 61.1 to 49.2, a 19% loss. Going from 1440p to 4K at High settings drops the average from 49.2 to 31.1, a 37% loss. The CPU's role is comparatively minor here; the Ryzen 5 8400F has 6 cores, 12 threads, and a boost clock of 4.70 GHz, which is more than adequate for Control's engine. The recorded data shows no scenario where the CPU would bottleneck before the GPU, as even the lowest settings at 4K yield only 46.4 FPS, far below what this processor can feed.
At 1080p Low, the system reaches 96.9 FPS, which suggests the GPU is still the constraint at that point. The GTX 1070's 8 GB of GDDR5 memory and 256.3 GB/s bandwidth are the primary resources being taxed. The Ryzen 5 8400F's 83.2 GB/s memory bandwidth and 16 MB shared L3 cache are not stressed by this game's workload.
FAQ
Q: Can this combination run Control at 1080p with playable frame rates?
A: Yes. The database shows 1920x1080 High, Medium, and Low all clear the 60 FPS threshold. High averages 61.1 FPS, Medium averages 71.3 FPS, and Low averages 96.9 FPS. Ultra does not clear 60 FPS, averaging 51.9 FPS.
Q: What is the best playable setting at 2560x1440?
A: Only Low is playable at 1440p, averaging 74.7 FPS. Medium drops to 55 FPS, High to 49.2 FPS, and Ultra to 39.7 FPS, all below the 60 FPS threshold.
Q: Is 4K resolution possible with this hardware?
A: No. At 3840x2160, even Low settings average only 46.4 FPS. Medium averages 37.7 FPS, High averages 31.1 FPS, and Ultra averages 28.6 FPS. None of these meet the 60 FPS playable threshold.
Q: How does the GTX 1070 compare to its nearest rivals in the database?
A: The GTX 1070's average benchmark score is 9780. The AMD FirePro W5000 scores 9803 (0.2% higher), the NVIDIA Quadro M2000M scores 9832 (0.5% higher), the NVIDIA Tesla M10 scores 9724 (0.6% lower), and the NVIDIA Tesla C2070 scores 9716 (0.7% lower). Performance differences are within 1%, so these are effectively equivalent in raw compute.
Q: How does the Ryzen 5 8400F compare to its nearest CPU rivals?
A: The Ryzen 5 8400F averages 25005 across all benchmark tests. The AMD Ryzen 5 7500F scores 24964 (0.2% lower), the Intel Core i7-11850H scores 24935 (0.3% lower), the Intel Core i7-13620H scores 24911 (0.4% lower), and the AMD EPYC 9474F scores 25103 (0.4% higher). All are within 0.5% of each other.
Q: Does the CPU or GPU matter more for this game?
A: The GPU matters far more. Evidence: the CPU ranks in the 77th percentile, the GPU ranks in the 47th percentile, and frame rates scale strongly with resolution and settings. At 1080p Low, the system hits 96.9 FPS, but at 4K Ultra it falls to 28.6 FPS, a 70% reduction driven entirely by GPU load.
Similar Performance Alternatives
For the CPU side, the AMD Ryzen 5 7500F is the closest match with an average score of 24964 versus 25005 for the Ryzen 5 8400F, a delta of 0.2%. The Intel Core i7-11850H and Intel Core i7-13620H are also within 0.4%, meaning any of these processors would yield nearly identical frame rates in Control when paired with the same GPU. The AMD EPYC 9474F scores 0.4% higher, but its server-oriented design would not change gaming outcomes measurably.
On the GPU side, the AMD FirePro W5000 scores 0.2% higher and the NVIDIA Quadro M2000M scores 0.5% higher than the GTX 1070. The NVIDIA Tesla M10 and Tesla C2070 score 0.6% and 0.7% lower, respectively. These differences are within measurement noise, so swapping to any of these cards would produce frame rates within 1 FPS of the recorded values at each resolution and settings preset. None of these alternatives would lift the system into playable 4K territory or change the 1440p verdict beyond Low settings.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 61.1 FPS. Medium averages 71.3 FPS and Low averages 96.9 FPS, both also playable, but High delivers the best visual quality while still clearing the threshold.
At 2560x1440, only Low is playable, averaging 74.7 FPS. Medium falls to 55 FPS, which is below the 60 FPS threshold.
At 3840x2160, no settings preset reaches 60 FPS. The highest average is Low at 46.4 FPS, followed by Medium at 37.7 FPS, High at 31.1 FPS, and Ultra at 28.6 FPS.
The Verdict
The database verdict for this combination is clear. At 1920x1080, the system can run Control with playable frame rates on High, Medium, and Low settings, with High being the best playable option at 61.1 FPS average. At 2560x1440, only Low settings are playable, averaging 74.7 FPS. At 3840x2160, no settings preset achieves 60 FPS, so 4K is not viable for this game with this hardware.
The overall assessment: this PC can run Control comfortably at 1080p with high detail, and can manage 1440p only at the lowest settings. Users targeting higher visual fidelity at 1440p or any 4K play experience would need a stronger GPU.
Measured FPS Breakdown
1920x1080:
- Low: average 96.9 FPS, min and max not recorded
- Medium: average 71.3 FPS, min and max not recorded
- High: average 61.1 FPS, min and max not recorded
- Ultra: average 51.9 FPS, min and max not recorded
2560x1440:
- Low: average 74.7 FPS, min and max not recorded
- Medium: average 55 FPS, min and max not recorded
- High: average 49.2 FPS, min and max not recorded
- Ultra: average 39.7 FPS, min and max not recorded
3840x2160:
- Low: average 46.4 FPS, min and max not recorded
- Medium: average 37.7 FPS, min and max not recorded
- High: average 31.1 FPS, min and max not recorded
- Ultra: average 28.6 FPS, min and max not recorded
The recorded data shows a consistent degradation pattern. Each step up in resolution at a fixed setting reduces average FPS by roughly 20% to 40%. Each step up in settings at a fixed resolution reduces average FPS by roughly 15% to 25%. The largest single drop appears when moving from 1440p Medium (55 FPS) to 1440p High (49.2 FPS), an 11% loss. The smallest drop is from 1080p Medium (71.3 FPS) to 1080p High (61.1 FPS), a 14% loss. These figures align with the GTX 1070's memory bandwidth and fillrate limits as the primary constraint.