Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 31 | 35 | 49 |
| 1440p QHD | 40 | 46 | 52 | 73 |
| 1080p Full HD | 53 | 61 | 69 | 97 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The pairing of AMD's Ryzen 5 7600 with NVIDIA's GeForce GTX 1070 is an unusual one: a modern CPU from the 7000 series matched with a Pascal-era graphics card. The database contains measured frame-rate data for this combination running Control, the 2019 action adventure from Remedy, and the results paint a clear picture. The Ryzen 5 7600 sits in the 78th percentile of all CPUs tested, while the GTX 1070 lands in the 47th percentile of all GPUs, and that imbalance shapes everything about how this game plays. The short version: 1080p is comfortable, 1440p is a compromise, and 4K is off the table.
How This Combo Ranks
Across the 3,720 CPU and GPU combinations tested in Control, this pairing ranks 3,083rd. That places it in the bottom sixth of the leaderboard for this specific title, which is entirely a reflection of the graphics card rather than the processor. The Ryzen 5 7600 posts a Geekbench multi-core score of 13,413 and a single-core score of 2,521, numbers that comfortably exceed anything Control's engine can demand from a CPU. The GTX 1070, by contrast, records a PassMark G3D score of 13,498 and a 3DMark Steel Nomad DX12 score of 1,082, and Control is a DX12 title that leans hard on the GPU.
The rank also has to be read against the game's demands. Control released in August 2019 and is known as one of the more demanding titles of its generation, particularly when destruction physics fill the screen. A card in the 47th percentile of all GPUs meets that workload only at reduced resolutions or reduced settings, which is exactly what the frame-rate data shows.
FAQ
Q: Can the Ryzen 5 7600 and GTX 1070 run Control at 60 FPS?
A: Yes, but only at 1920x1080. At that resolution the combo averages 97 FPS on Low, 69 FPS on Medium, and 61 FPS on High. Only Low manages it at 2560x1440, with an average of 73 FPS. Nothing clears 60 FPS at 3840x2160.
Q: Is the CPU or the GPU the bottleneck in Control?
A: The GPU. The Ryzen 5 7600 scores 6,503 in 3DMark max-threads and 999 in single-thread, placing it in the 78th percentile of all CPUs, while the GTX 1070 sits in the 47th percentile of all GPUs. Frame rates scale steeply as resolution and settings drop, a classic GPU-limited pattern.
Q: What is the best-looking configuration that still hits 60 FPS?
A: 1920x1080 at High settings, averaging 61 FPS. That is the highest preset at any resolution that meets the 60 FPS playability threshold in the recorded data.
Q: How much performance is lost going from 1080p to 1440p?
A: On Medium settings, the average falls from 69 FPS to 52 FPS, a drop of roughly a quarter. The same pattern holds across presets: 97 to 73 on Low, 61 to 46 on High, and 53 to 40 on Ultra.
Q: Does the GTX 1070 support ray tracing in Control?
A: No. The card has no RT cores, and Control's celebrated ray-traced effects are not part of the measured results here. The data reflects rasterized rendering only.
Q: What CPU performance does the Ryzen 5 7600 bring outside of gaming?
A: The database records a Cinebench R23 multi-core score of 12,735, a single-core score of 1,852, and a PassMark multithread score of 27,058, consistent with six cores and twelve threads on the Zen 4 architecture.
CPU and GPU Roles
The division of labor here is lopsided. At every resolution and every preset in the dataset, the GTX 1070 is the limiting factor, and the evidence is in the scaling. From 1080p to 1440p on Medium, average frame rate falls from 69 to 52 FPS; from 1440p to 4K it falls further to 35 FPS. If the CPU were the constraint, raising the resolution would flatten performance, not collapse it. The Ryzen 5 7600, with a 5.10 GHz boost clock and DDR5 memory support delivering 83.2 GB/s of bandwidth, keeps the engine fed throughout.
Preset scaling tells the same story. At 1080p, moving from Low to Ultra cuts the average from 97 FPS to 53 FPS, nearly halving performance through settings changes alone. Those settings, higher-resolution textures and heavier post-processing, load the GPU's 1,920 shading units and its 256.3 GB/s of GDDR5 bandwidth. The recorded minimum and maximum at 1080p Medium, 58 to 79 FPS, show the CPU holding a tight frame-time envelope when the GPU is not saturated, which is exactly the behavior of a processor with far more headroom than the game needs.
In short: at 1080p the GTX 1070 is working near its limit while the Ryzen 5 7600 idles along, and at 4K the GPU is fully exhausted at every preset.
Similar Performance Alternatives
On the CPU side, the database's nearest-rival data shows the Ryzen 5 7600 clustered tightly with several parts. The AMD Ryzen 9 6900HX averages within 0.2 percent of its aggregate benchmark score, the AMD Ryzen 7 7435HS within 0.3 percent, the Intel Core i9-11900KF within 0.4 percent, and the AMD Ryzen 5 8540U within 0.5 percent. Any of those processors would deliver effectively identical Control performance in this pairing, because the game never stresses the 7600 in the first place.
On the GPU side, the neighbors are older and more heterogeneous: the AMD FirePro W5000 sits 0.2 percent behind the GTX 1070's average benchmark score, the NVIDIA Quadro M2000M 0.5 percent behind, the NVIDIA Tesla M10 0.6 percent ahead, and the NVIDIA Tesla C2070 0.7 percent ahead. The practical takeaway is that any of these cards would produce broadly similar Control results, meaning the performance ceiling observed here is a property of this performance class of GPU, not something specific to the GTX 1070.
The upgrade path is equally clear from the data. Since the CPU ranks in the 78th percentile and the GPU in the 47th, swapping in a stronger graphics card while keeping the Ryzen 5 7600 would move this pairing up the Control leaderboard directly, with the 24 lanes of PCIe Gen 5 available from the CPU offering plenty of interface headroom for a modern card.
Measured FPS Breakdown
At 1920x1080, the recorded averages are 97 FPS on Low, 69 FPS on Medium, 61 FPS on High, and 53 FPS on Ultra. The Medium run also captured a minimum of 58 FPS and a maximum of 79 FPS, indicating that the average conceals dips just below 60 during heavier scenes.
At 2560x1440, averages drop to 73 FPS on Low, 52 FPS on Medium, 46 FPS on High, and 40 FPS on Ultra. The Medium run recorded a 44 FPS minimum and a 60 FPS maximum, so even the best moments at this resolution only just touch 60, and the typical frame lands well below it.
At 3840x2160, the combo averages 49 FPS on Low, 35 FPS on Medium, 31 FPS on High, and 27 FPS on Ultra. The Medium run at 4K shows a 30 FPS minimum and a 40 FPS maximum. Even the lightest preset at the heaviest resolution cannot reach the 60 FPS threshold.
The stepwise pattern is remarkably consistent: each resolution increase costs roughly a quarter to a third of the frame rate at any given preset, and each preset step up costs roughly ten percent. Nothing in the data suggests a setting change alone rescues 4K.
The Verdict
Can this PC run Control? Yes, with conditions. At 1920x1080, the answer is an unqualified yes: Low, Medium, and High all clear the 60 FPS playability threshold, and High is the best-looking configuration that holds it, averaging 61 FPS. Players who prefer headroom over eye candy can run Low and enjoy a 97 FPS average.
At 2560x1440, the verdict is a qualified yes. Only the Low preset averages above 60 FPS, at 73 FPS, so 1440p gaming on this hardware means sacrificing visual fidelity. Medium at 52 FPS average is playable for those tolerant of lower frame rates, but it does not meet the threshold.
At 3840x2160, the answer is no. No preset produces a 60 FPS average, and even Low tops out at 49 FPS. Ultra at 4K, at 27 FPS, is effectively a slideshow.
The overall judgment: the Ryzen 5 7600 is more CPU than this pairing needs by a wide margin, while the GTX 1070 defines the experience. For 1080p play at High settings, this combination runs Control well. For anything beyond that, the graphics card is the wall.