Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
192 FPS
Ultra 1080p Measured
105 FPS

1440p (2K / QHD)

Low 1440p Measured
145 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
98 FPS
Ultra 4K Measured
54 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 24,964
Graphics Card
Required 27,787
Your GPU 41,187

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 62 70 98
1440p QHD 80 92 103 145
1080p Full HD 105 121 136 192

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 121
1920x1080 Low 192
1920x1080 Medium 136
1920x1080 Ultra 105
2560x1440 High 92
2560x1440 Low 145
2560x1440 Medium 103
2560x1440 Ultra 80
3840x2160 High 62
3840x2160 Low 98
3840x2160 Medium 70
3840x2160 Ultra 54

Performance Analysis: Control on Your System

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3080 Ti combination delivers a robust Control experience, with benchmark data showing that the pairing is capable of exceeding the 60 FPS playability threshold at every tested resolution, though the margin of safety narrows considerably at 4K Ultra settings. The data reveals a system that is well-balanced for this Action Adventure title, with the GPU acting as the primary scaling factor as resolution increases, while the CPU’s strong single-thread performance ensures high frame rates at lower resolutions.

FAQ

Q: What is the best playable setting at 3840x2160 for this combo?

A: The verdict data lists High as the best setting at 4K, with an average FPS of 62. This is the most demanding preset that stays above the 60 FPS threshold, as Ultra drops to an average of 54 FPS.

Q: Can this system run Control at 2560x1440 with maximum settings?

A: Yes, the measured FPS shows an average of 80 FPS at 1440p Ultra. The verdict confirms Ultra is playable at this resolution, with all four settings (Low, Medium, High, Ultra) clearing the 60 FPS bar.

Q: How much performance headroom exists at 1920x1080?

A: At 1080p, even the most demanding Ultra preset produces an average of 105 FPS, while Low settings reach 192 FPS. This indicates substantial headroom above the 60 FPS playability threshold at every preset.

Q: What are the minimum FPS figures for Medium settings?

A: The data includes min FPS only for Medium presets: 59 FPS at 4K, 88 FPS at 1440p, and 116 FPS at 1080p. The 4K Medium minimum of 59 FPS is the only recorded instance where the frame rate dips marginally below 60 FPS.

Q: How does the CPU’s benchmark score compare to its nearest rivals?

A: The Ryzen 5 7500F has an average benchmark score of 24964. It sits within 0.4% of its nearest rivals, including the Intel Core i7-11850H (24935, 0.1% delta) and the AMD Ryzen 5 8400F (25005, -0.2% delta).

Q: What is the GPU’s percentile ranking among all tested graphics cards?

A: The RTX 3080 Ti holds an 83rd percentile ranking among all GPUs, based on its average benchmark score of 41187. Its nearest rival, the AMD Radeon Pro 5300, scores 40870, representing a 0.8% delta.

CPU and GPU Roles

The benchmark data for Control reveals a clear division of labor between the AMD Ryzen 5 7500F and the NVIDIA GeForce RTX 3080 Ti, with the GPU becoming progressively more dominant as resolution increases. At 1920x1080, the difference between Low and Ultra settings is 87 FPS (192 vs 105), indicating that the graphics card is already the limiting factor, but the CPU’s 3DMark single-thread score of 974 and multi-thread score of 6379 ensure that it never becomes a bottleneck at these lower resolutions. The CPU’s Cinebench R23 single-core score of 3218 suggests it can feed the GPU adequately even at 1080p, where frame rates exceed 190 FPS.

Moving to 2560x1440, the scaling pattern shifts further toward the GPU. The average FPS drops from 145 at Low to 80 at Ultra, a 45% reduction in performance when moving to the highest preset. This 1440p behavior shows the RTX 3080 Ti, with its 34.10 TFLOPS FP32 performance and 912.4 GB/s memory bandwidth, becoming the primary driver of frame rate variance. The CPU’s role diminishes, as the 6-core, 12-thread processor maintains its ability to deliver frames without introducing stutter, evidenced by the 88 FPS minimum at Medium settings.

At 3840x2160, the GPU’s dominance is absolute. The RTX 3080 Ti’s 12 GB of GDDR6X memory and 384-bit bus are taxed heavily, with the average FPS falling to 54 at Ultra and 62 at High. The gap between Low (98 FPS) and Ultra (54 FPS) at 4K is 44 FPS, a 45% drop that mirrors the 1440p scaling. This pattern confirms that Control’s visual complexity at 4K is almost entirely a GPU workload, with the CPU’s Zen 4 architecture providing consistent frame pacing without becoming a constraint. The data implies that users seeking higher 4K frame rates would benefit more from a GPU upgrade than a CPU swap, as the Ryzen 5 7500F’s performance appears sufficient even at the highest resolution tested.

Measured FPS Breakdown

At 1920x1080, the combination delivers its highest performance envelope. Low settings produce an average of 192 FPS, Medium reaches 136 FPS with a minimum of 116 FPS and a maximum of 157 FPS, High achieves 121 FPS, and Ultra maintains an average of 105 FPS. The variance between the minimum and maximum at Medium (41 FPS) indicates some scene-dependent fluctuation, but the absolute values remain far above the 60 FPS playability threshold. All four presets at 1080p are comfortably playable, with the Ultra preset still offering 75% more headroom than the minimum required for smooth gameplay.

The 2560x1440 results show a step-down in raw numbers but retain strong playability. Low settings average 145 FPS, Medium averages 103 FPS with a minimum of 88 FPS and maximum of 118 FPS, High averages 92 FPS, and Ultra averages 80 FPS. The Medium preset’s 30 FPS spread between minimum and maximum suggests that complex scenes with physics interactions can cause noticeable frame dips, but the 88 FPS floor ensures no stutter is perceptible. The progression from Low to Ultra represents a 45% reduction in average FPS, confirming that each settings tier has a meaningful impact on GPU load at this resolution.

At 3840x2160, the performance curve steepens considerably. Low settings yield an average of 98 FPS, Medium drops to 70 FPS with a minimum of 59 FPS and maximum of 80 FPS, High averages 62 FPS, and Ultra falls to 54 FPS. The Medium preset’s minimum of 59 FPS is the only recorded instance across all resolutions and settings where the frame rate dips below the 60 FPS threshold, even though the average remains above it. The High preset’s 62 FPS average provides just 2 FPS of headroom, indicating that 4K gaming with this combo requires careful settings management. The Ultra preset at 4K is the only configuration that fails to maintain a 60 FPS average, making it unsuitable for consistent smooth gameplay.

The Verdict

The benchmark data clearly indicates that this PC can run Control at all three tested resolutions, but the playability margin varies significantly. At 1920x1080, the verdict confirms that all four settings — Low, Medium, High, and Ultra — are playable, with the best setting being Ultra at an average of 105 FPS. This represents overwhelming performance headroom, making 1080p an excellent target for this combination.

At 2560x1440, the system again achieves playable status across all presets, with Ultra as the best setting at an average of 80 FPS. The 20 FPS buffer above the 60 FPS threshold at Ultra ensures that even demanding scenes with multiple enemies and destructible environments will remain fluid. The verdict lists High, Low, Medium, and Ultra as playable, with no settings excluded.

The 3840x2160 verdict is more nuanced. The playable settings include High (62 FPS), Low (98 FPS), and Medium (70 FPS), but Ultra is excluded due to its 54 FPS average. The best playable setting at 4K is High, which achieves 62 FPS — a marginal 2 FPS above the threshold. This suggests that 4K gaming is possible but leaves little room for error; users should expect occasional dips below 60 FPS in heavy combat scenarios, as evidenced by the Medium preset’s 59 FPS minimum. For guaranteed smoothness at 4K, the data recommends High settings, but those seeking a consistent 60+ FPS experience with no exceptions may prefer 1440p Ultra.

Similar Performance Alternatives

Examining the nearestRivals data for the CPU and GPU provides context for what other hardware would behave similarly in this game. The AMD Ryzen 5 7500F’s average benchmark score of 24964 places it within 0.4% of the Intel Core i7-11850H (24935, 0.1% delta), the AMD Ryzen 5 8400F (25005, -0.2% delta), the Intel Core i7-13620H (24911, 0.2% delta), and the Intel Core 5 210H (24872, 0.4% delta). In Control, these processors would deliver nearly identical frame pacing and CPU-bound performance, meaning users with any of these chips paired with an RTX 3080 Ti would expect the same 1080p and 1440p results.

On the GPU side, the NVIDIA GeForce RTX 3080 Ti’s average benchmark score of 41187 is closely matched by the AMD Radeon Pro 5300 (40870, 0.8% delta), the NVIDIA Tesla M40 24 GB (41707, -1.2% delta), the NVIDIA Tesla M40 (41897, -1.7% delta), and the NVIDIA GeForce RTX 5070 (40377, 2% delta). The RTX 5070’s 2% delta is the largest difference among these rivals, suggesting it would perform approximately 2% worse in GPU-bound scenarios like 4K Ultra in Control. The Radeon Pro 5300’s 0.8% delta indicates near-identical performance, making it a viable alternative for matching the 3080 Ti’s 4K High setting output of 62 FPS.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3080 Ti ranks 981st out of 3720 tested combos in Control, placing it in the top 26.4% of all configurations evaluated. This percentile positioning suggests that while this system is not at the absolute state-of-the-art, it outperforms the majority of tested hardware pairings in this specific game. The rank reflects the balance between the CPU’s 77th percentile ranking among all processors and the GPU’s 83rd percentile among all graphics cards, with the GPU being the more dominant contributor to this game’s performance.

The 981st rank out of 3720 combos indicates that there are 980 configurations that achieve higher average FPS in Control, likely featuring newer or higher-tier GPUs such as the RTX 40-series or AMD’s latest offerings. However, the data shows that this combo still delivers playable performance at 4K High and excellent performance at 1440p Ultra, meaning the rank does not preclude a satisfying experience. The gap between this combo and the top-ranked systems is primarily driven by GPU performance, as the RTX 3080 Ti’s 83rd percentile is strong but not elite by current standards.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains an average of 60 FPS or higher is Ultra, which achieves 105 FPS. This setting provides the maximum visual fidelity while retaining 75% performance headroom above the playability threshold. The data shows that even the heaviest graphical load at 1080p cannot push this combo below 60 FPS, making Ultra the unequivocal choice for this resolution.

For 2560x1440, the best setting is also Ultra, with an average of 80 FPS. This offers a 33% buffer above the 60 FPS threshold, ensuring that the game remains smooth even during intense particle effects and physics simulations. The 80 FPS average at 1440p Ultra represents a sweet spot for this hardware, balancing visual quality with consistent frame delivery.

At 3840x2160, the most demanding playable preset is High, which averages 62 FPS. This setting provides only a 3% margin above the 60 FPS threshold, making it a borderline choice. The Medium preset offers a more comfortable 70 FPS average with a 59 FPS minimum, but High’s superior visual quality comes at the cost of reduced headroom. For users who prioritize visual fidelity at 4K, High is the recommended setting, but those who demand absolute frame rate stability may prefer Medium to avoid the occasional dips below 60 FPS that the data shows are possible.