Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
108 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
82 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
55 FPS
Ultra 4K Measured
30 FPS
14.7ms Frame Time
22ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 24,964
Graphics Card
Required 27,787
Your GPU 19,036

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 35 39 55
1440p QHD 45 52 58 82
1080p Full HD 59 68 77 108

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 68
1920x1080 Low 108
1920x1080 Medium 77
1920x1080 Ultra 59
2560x1440 High 52
2560x1440 Low 82
2560x1440 Medium 58
2560x1440 Ultra 45
3840x2160 High 35
3840x2160 Low 55
3840x2160 Medium 39
3840x2160 Ultra 30

Performance Analysis: Control on Your System

This combo pairs the AMD Ryzen 5 7500F with the AMD Radeon RX 6600 for Control, a 2019 action-adventure title. The data shows a system that is heavily GPU-bound at higher resolutions, but the CPU’s strong single-threaded performance allows for smooth gameplay at 1080p with high settings. The measured results indicate a clear performance ceiling at 4K, where even low settings struggle to reach a playable frame rate.

How This Combo Ranks

The AMD Ryzen 5 7500F and AMD Radeon RX 6600 combination ranks at 2904 out of 3720 tested combos for Control. This places it in the lower-middle tier of all possible pairings, which is expected for a mid-range GPU paired with a capable but not top-end CPU. The percentile data for the individual components provides context: the CPU sits in the 77th percentile among all CPUs, while the GPU is in the 63rd percentile among all GPUs. This suggests the CPU is relatively stronger than the GPU, which is a typical bottleneck dynamic for this pairing.

The rank implies that while this system can run the game, it will not be at the top of the performance charts. For a demanding title like Control, the 2904th position out of 3720 combos indicates that most of the higher-ranked systems will feature more powerful graphics cards. However, the rank is not the whole story; the measured FPS data reveals that the combo is fully capable of delivering a solid experience at 1080p and even at 1440p with reduced settings. The gap between the CPU’s high percentile (77) and the GPU’s lower percentile (63) is the primary reason this combo ranks where it does—the graphics card is the limiting factor at higher resolutions and presets.

CPU and GPU Roles

The benchmark data for Control reveals a clear division of labor between the CPU and GPU, with the GPU becoming increasingly dominant as resolution rises. At 1920x1080, the CPU’s strong single-thread performance keeps the system balanced, but the FPS drop from Low to Ultra settings shows the GPU is already under stress. For instance, at 1080p, the average FPS falls from 108 at Low to 68 at High, a decline of 40 FPS, indicating that the GPU is struggling with the increased graphical load. The CPU, with its high passmark single-thread score of 3841, is likely not the bottleneck at this resolution.

Scaling up to 2560x1440 shows a more pronounced GPU limitation. The average FPS at High settings drops to 52, which is below the 60 FPS threshold, while Low settings still manage 82 FPS. This suggests that the GPU’s memory bandwidth of 224.0 GB/s and 8 GB of GDDR6 memory are beginning to be overwhelmed by the higher resolution. At 3840x2160, the GPU is clearly the dominant factor. The average FPS at Low settings is 55, which is still below 60, and High settings yield a mere 35 FPS. The CPU’s role is diminished here, as the GPU’s rendering workload takes over.

The pattern is clear: the Ryzen 5 7500F, with its 6 cores and 12 threads and boost clock of 5.00 GHz, is more than adequate for Control. The data shows that the GPU is the sole reason for performance drops between resolutions. This is not a CPU-intensive title; it is a visual showcase that relies heavily on the graphics card. For a user with this combo, the CPU will never be the limiting factor, which means the overclocking headroom of the CPU is less relevant than the GPU’s clock speeds. The GPU’s boost clock of 2491 MHz is the key spec to watch.

FAQ

Q: Can this PC run Control at 1080p with high settings?

A: Yes. The measured data shows an average of 68 FPS at 1920x1080 on High settings. This clears the 60 FPS playable threshold, making it a smooth experience.

Q: Is 4K playable on this system?

A: No. At 3840x2160, the highest average FPS is 55 on Low settings, which falls short of the 60 FPS threshold. High and Ultra are even lower, at 35 and 30 FPS respectively.

Q: Which is the better setting, Medium or High, at 1440p?

A: The data shows Medium at 1440p averages 58 FPS, which is below the playable threshold, while High is 52 FPS. Both are below 60 FPS, so only Low settings at 82 FPS are playable at that resolution.

Q: How does the GPU compare to its nearest rivals?

A: The AMD Radeon RX 6600 has an average benchmark score of 19036. Its closest rival, the NVIDIA Quadro K6000, scores 19030, a delta of 0%. The GeForce RTX 4050 Mobile is slightly faster at 19049, with a delta of -0.1%, meaning the RX 6600 is 0.1% slower.

Q: Will lowering settings from Ultra to High improve performance significantly?

A: Yes. At 1080p, Ultra averages 59 FPS, which is just below the threshold, while High jumps to 68 FPS. The improvement is 9 FPS, making High the better choice for a stable experience.

Q: Is the CPU a bottleneck in this game?

A: No. The CPU’s benchmark scores are strong, with a multi-thread score of 26825 in Passmark, and the FPS scaling between resolutions shows the GPU is the limiting factor. The CPU’s percentile rank of 77 further indicates it is more capable than the GPU.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU and GPU, several alternatives would provide comparable performance in Control. For the AMD Ryzen 5 7500F, the Intel Core i7-13620H is the closest match with an average score of 24911 and a delta of 0.2% faster. This Intel chip would behave similarly in terms of CPU-bound tasks, though it is a mobile part, which might have different power characteristics. The AMD Ryzen 5 8400F is also very close, with a delta of -0.2%, meaning the 7500F is slightly slower; the data shows the 8400F scores 25005 compared to the 7500F’s 24964. The Intel Core i7-11850H and Intel Core 5 210H are also within 0.4% of the 7500F’s score, meaning any of these would produce nearly identical FPS in Control.

On the GPU side, the AMD Radeon RX 6600’s nearest rival is the NVIDIA Quadro K6000, with an identical average score of 19030 (delta of 0%). This is a professional-grade card and would offer similar frame rates in Control, though drivers and features might differ. The NVIDIA GeForce RTX 4050 Mobile is slightly faster at 19049 (delta of -0.1%), meaning the RX 6600 is just 0.1% behind a laptop card. The NVIDIA Tesla K20m and NVIDIA RTX 2000 Ada Generation are also within 0.4% of the RX 6600’s performance. For a user, this means that swapping the RX 6600 for any of these would result in negligible FPS changes, as the deltas are under 1%. This is a tight grouping that confirms the RX 6600 sits at a performance sweet spot, but it also means there are no significantly faster alternatives nearby without moving to a higher GPU tier.

Measured FPS Breakdown

The measured FPS data is provided for three resolutions and four settings, but not all settings have min/max values. At 1920x1080, the average FPS is 108 on Low, 77 on Medium, 68 on High, and 59 on Ultra. The Medium setting has a minimum and maximum of 65 and 88 FPS, respectively, indicating a stable range. At 2560x1440, the averages are 82 on Low, 58 on Medium, 52 on High, and 45 on Ultra. The Medium setting shows a min of 49 and max of 67 FPS. At 3840x2160, the averages drop significantly: 55 on Low, 39 on Medium, 35 on High, and 30 on Ultra. The Medium setting has a min of 33 and max of 45, showing a tight range but at a low level. The data confirms that the Medium preset is the only one with full min/max readings, and the FPS range is consistent across all resolutions, with the 4K results being the least playable.

The Verdict

The verdict data shows that this PC can run Control, but only at specific settings and resolutions. At 1920x1080, the system is fully playable at High settings with an average of 68 FPS, which clears the 60 FPS threshold. It also supports Medium at 77 FPS and Low at 108 FPS, but Ultra falls just short at 59 FPS. At 2560x1440, the only playable setting is Low with an average of 82 FPS. The Medium setting at 1440p is 58 FPS, which is below the playable threshold, and High/Ultra are lower. At 3840x2160, there are no playable settings, as even Low averages 55 FPS, which is below the 60 FPS target. The system is not capable of hitting 60 FPS at 4K, and the best-case scenario at that resolution is a 4K low preset, which still underperforms.

For a user with a 1080p monitor, this is a solid experience with headroom. For a 1440p display, the user will have to compromise with low settings. At 4K, the system is not recommended for Control. The CPU and GPU combo is well-balanced for 1080p high and 1440p low, but anything higher is a stretch.

Best Settings per Resolution

Based on the verdict data, the most demanding preset that stays at or above 60 FPS is as follows:

  • 1920x1080: The best playable setting is High with an average FPS of 68. This is the highest preset that clears 60 FPS.
  • 2560x1440: The best playable setting is Low with an average FPS of 82. This is the only preset at this resolution that meets the 60 FPS target.
  • 3840x2160: No preset is playable at this resolution. The highest average FPS is 55 on Low, which is below the threshold.

The data makes it clear that 1080p is the sweet spot for this combo, and 1440p is only viable with low settings. The system is not suited for 4K gaming in Control. For a smooth experience, the user should stick to 1080p High or 1440p Low. The 1080p High setting offers a balanced experience with a 68 FPS average, while 1440p Low at 82 FPS is smoother but with lower visual quality. The choice depends on the monitor resolution and the user’s preference for visuals versus frame rate.