Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

91%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
166 FPS
Ultra 1080p Measured
91 FPS

1440p (2K / QHD)

Low 1440p Measured
126 FPS
Ultra 1440p Measured
69 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
47 FPS
9.5ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 32,750
Graphics Card
Required 27,787
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 47 54 60 85
1440p QHD 69 79 89 126
1080p Full HD 91 105 118 166

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 105
1920x1080 Low 166
1920x1080 Medium 118
1920x1080 Ultra 91
2560x1440 High 79
2560x1440 Low 126
2560x1440 Medium 89
2560x1440 Ultra 69
3840x2160 High 54
3840x2160 Low 85
3840x2160 Medium 60
3840x2160 Ultra 47

Performance Analysis: Control on Your System

The AMD Ryzen 5 7400F paired with the NVIDIA GeForce RTX 3070 Ti delivers a performance profile that scales predictably with resolution and preset in Control, a 2019 Action Adventure title. Measured data shows this combination produces playable frame rates at 1920x1080 and 2560x1440 across all tested settings, while 3840x2160 requires a reduction in graphical fidelity to maintain smooth motion. The benchmark results, taken directly from measured FPS tables, provide a clear picture of what this hardware can achieve without relying on extrapolation or estimation.

Measured FPS Breakdown

At 1920x1080, the RTX 3070 Ti paired with the Ryzen 5 7400F produces its highest frame rates. With Low settings, the average FPS reaches 166, which is the maximum recorded for this combination across any resolution or preset. Moving to Medium settings, the average drops to 118 FPS, with a minimum of 101 FPS and a maximum of 136 FPS, indicating consistent performance even during demanding scenes. High settings yield an average of 105 FPS, while Ultra settings still deliver a robust 91 FPS average. The gap between Low and Ultra at this resolution is 75 FPS, showing that the GPU has substantial headroom even when pushed to maximum detail.

At 2560x1440, the performance remains strong but shows predictable scaling. Low settings produce an average of 126 FPS, which is 40 FPS lower than at 1080p. Medium settings average 89 FPS, with a minimum of 76 FPS and a maximum of 103 FPS, maintaining a comfortable margin above the 60 FPS playability threshold. High settings average 79 FPS, while Ultra settings average 69 FPS. The difference between Low and Ultra at 1440p is 57 FPS, slightly less pronounced than at 1080p, suggesting the GPU becomes more of a limiting factor as pixel count increases.

At 3840x2160, the performance envelope tightens considerably. Low settings still manage an average of 85 FPS, which is playable, but Medium settings average exactly 60 FPS, with a minimum of 51 FPS and a maximum of 69 FPS. This places Medium at the precise boundary of the playability threshold, with occasional dips below 60 FPS. High settings average 54 FPS, falling short of smooth gameplay, and Ultra settings average 47 FPS, which is noticeably below the threshold. The scaling from Low to Ultra at 4K is 38 FPS, the smallest absolute difference among all resolutions, indicating that at this resolution, the GPU's raw throughput is the primary constraint.

The data shows that the most demanding preset at each resolution—Ultra—produces average FPS of 91 at 1080p, 69 at 1440p, and 47 at 4K. This represents a 44 FPS drop from 1080p to 4K at Ultra settings, demonstrating the significant impact of resolution on performance. At Low settings, the drop from 1080p to 4K is 81 FPS, which is a larger absolute difference, but the 4K result remains playable.

Similar Performance Alternatives

The CPU and GPU each have nearest rivals that would produce similar behavior in Control. For the AMD Ryzen 5 7400F, the closest alternatives based on average benchmark scores are the Intel Core i5-14600T with an average score of 32707 and a delta of 0.1 percent, the Intel Core Ultra 7 155H with a score of 32697 and a delta of 0.2 percent, the AMD Ryzen 7 PRO 6850H with a score of 32812 and a delta of -0.2 percent, and the AMD Ryzen AI 7 PRO 360 with a score of 32662 and a delta of 0.3 percent. These rivals are all within 0.3 percent of the Ryzen 5 7400F's average benchmark score of 32750, meaning the CPU-bound aspects of Control would perform nearly identically when using any of these processors. The Ryzen 7 PRO 6850H is the only rival with a higher average score, but the difference is negligible for gaming purposes.

For the NVIDIA GeForce RTX 3070 Ti, the nearest rivals include the NVIDIA GeForce RTX 5070 Mobile with an average score of 29928 and a delta of 0.1 percent, the AMD Radeon RX 6800 with a score of 30095 and a delta of -0.5 percent, the NVIDIA GeForce RTX 2080 Ti with a score of 29783 and a delta of 0.5 percent, and the AMD Radeon RX 6700 with a score of 30433 and a delta of -1.6 percent. The RTX 3070 Ti's average benchmark score is 29945, placing it between the RTX 2080 Ti and the RX 6800. In Control specifically, the RTX 2080 Ti would likely produce frame rates within 1-2 FPS of the RTX 3070 Ti at most settings, while the RX 6800 might offer a slight edge in GPU-bound scenarios. The RX 6700, despite having a higher average score, shows a -1.6 percent delta, which could translate to marginally lower performance in real-world gaming.

These comparisons indicate that if a user were to substitute the Ryzen 5 7400F with any of its listed rivals, the measured FPS in Control would change by less than 1 percent due to CPU differences. Similarly, swapping the RTX 3070 Ti for an RTX 2080 Ti or RTX 5070 Mobile would yield nearly identical results, while an RX 6800 might provide a small boost in GPU-limited situations.

CPU and GPU Roles

The benchmark results show a clear division of labor between the CPU and GPU at different resolutions. At 1920x1080, the system achieves 166 FPS at Low settings, which is the highest frame rate recorded. This suggests that at lower resolutions, the CPU has enough headroom to feed the GPU, and the GPU is not fully saturated. However, the drop from Low to Ultra at 1080p is 75 FPS, which indicates that the GPU's load increases significantly with preset quality. The CPU's role at 1080p is to maintain high frame rates, and the Ryzen 5 7400F, with its 6 cores and 12 threads, appears sufficient for this task.

At 2560x1440, the frame rates decrease across all settings, but the pattern remains similar. The difference between Low and Ultra is 57 FPS, which is smaller than at 1080p. This narrowing suggests that as resolution increases, the GPU becomes more dominant in determining performance. The CPU still plays a role, but its influence diminishes relative to the GPU's pixel-processing workload. The fact that Ultra settings at 1440p still average 69 FPS indicates that the GPU has enough capacity to handle the increased pixel count without dropping below the playability threshold.

At 3840x2160, the GPU's dominance is most pronounced. The difference between Low and Ultra is only 38 FPS, and even Low settings average 85 FPS, which is lower than Medium at 1440p. This indicates that at 4K, the GPU is the primary bottleneck, and the CPU's performance has minimal impact on the final frame rate. The Ryzen 5 7400F's single-thread performance, as evidenced by its Cinebench R23 single-core score of 3072, is sufficient to avoid becoming a constraint, but the RTX 3070 Ti's 8 GB of GDDR6X memory and 21.75 TFLOPS of FP32 compute are the limiting factors.

The scaling between resolutions provides insight into the balance of this combination. From 1080p to 1440p, the average FPS across all settings drops by roughly 25-30 percent, which aligns with the increase in pixel count. From 1440p to 4K, the drop is more severe, with average FPS falling by 35-45 percent, reflecting the doubling of pixel count and the GPU's finite resources. This pattern confirms that the CPU's role is most critical at lower resolutions, while the GPU's role dominates at higher resolutions.

The Verdict

This PC can run Control with playable frame rates at all three tested resolutions, but the settings must be adjusted based on the target resolution. The playability threshold is 60 FPS, and the data shows which presets meet or exceed this threshold. At 3840x2160, the playable settings are Low and Medium. Low averages 85 FPS, which provides a comfortable margin, while Medium averages exactly 60 FPS, with a minimum of 51 FPS, meaning it will occasionally dip below 60 FPS during intense scenes. High and Ultra at 4K are not playable, with averages of 54 and 47 FPS respectively.

At 2560x1440, all four settings are playable. Low averages 126 FPS, Medium averages 89 FPS, High averages 79 FPS, and Ultra averages 69 FPS. Even the most demanding preset at this resolution stays above the 60 FPS threshold, with the minimum FPS at Medium being 76, which is well above the threshold. This makes 1440p the sweet spot for this combination, as it allows maximum visual quality without sacrificing smoothness.

At 1920x1080, all settings are also playable, with Low averaging 166 FPS, Medium averaging 118 FPS, High averaging 105 FPS, and Ultra averaging 91 FPS. The minimum FPS at Medium is 101, which is far above the threshold, indicating that the system never struggles at this resolution. The verdict is clear: for 4K gaming, users should stick to Low or Medium settings, while 1440p and 1080p allow for Ultra settings with frame rates well above 60 FPS.

How This Combo Ranks

Among all tested combinations in the benchmark database, this pairing of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3070 Ti ranks 1339 out of 3720 combos for Control. This places it in the 64th percentile of all systems tested, meaning it outperforms roughly 64 percent of configurations. The rank reflects the balance between the CPU and GPU, with the RTX 3070 Ti's percentile of 75 among all GPUs and the Ryzen 5 7400F's percentile of 83 among all CPUs contributing to the overall standing.

The combo rank of 1339 indicates that this system is above average for Control, but not at the top tier. Systems with higher-ranked GPUs, such as the RTX 3080 or RX 6800 XT, would likely achieve higher frame rates, particularly at 4K. However, the 1339 rank out of 3720 combos suggests that this configuration is well-suited for 1440p gaming, where the data shows it can handle Ultra settings at 69 FPS. The rank also highlights that the CPU is not a limiting factor, as its percentile is higher than the GPU's, meaning the RTX 3070 Ti is the more likely bottleneck in demanding scenarios.

FAQ

Q: What is the highest average FPS this combo can achieve in Control?

A: The highest average FPS is 166, achieved at 1920x1080 with Low settings.

Q: Can this system run Control at 4K with Ultra settings?

A: No, at 3840x2160 with Ultra settings, the average FPS is 47, which is below the 60 FPS playability threshold. The best playable settings at 4K are Medium, which averages 60 FPS.

Q: Which resolution offers the best balance of visual quality and performance?

A: At 2560x1440, Ultra settings average 69 FPS, providing high visual quality while staying above the 60 FPS threshold. This is the highest preset that maintains smooth gameplay at a resolution above 1080p.

Q: How does the RTX 3070 Ti compare to its nearest rival, the RTX 2080 Ti?

A: The RTX 3070 Ti has an average benchmark score of 29945, while the RTX 2080 Ti scores 29783, a delta of 0.5 percent. In Control, this translates to nearly identical frame rates, with the RTX 3070 Ti being slightly faster.

Q: What is the minimum FPS recorded for this combo at 1440p Medium settings?

A: The minimum FPS at 2560x1440 with Medium settings is 76, which is above the 60 FPS playability threshold.

Q: Is the Ryzen 5 7400F a bottleneck for the RTX 3070 Ti in this game?

A: The data suggests the CPU is not a bottleneck. At 1080p Low settings, the system achieves 166 FPS, and the CPU's percentile of 83 among all CPUs is higher than the GPU's percentile of 75, indicating the GPU is more likely to limit performance.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which averages exactly 60 FPS with a minimum of 51 and a maximum of 69. While Low settings average 85 FPS and provide a larger safety margin, Medium is the highest quality option that still meets the playability threshold. Users seeking a buffer against frame drops may prefer Low, but Medium represents the maximum visual fidelity at 4K.

At 2560x1440, the best settings are Ultra, which averages 69 FPS. This is the highest preset available and stays above the 60 FPS threshold, making it the optimal choice for this resolution. The minimum FPS at Medium is 76, so Ultra likely maintains a minimum above 60 FPS as well, although this data is not explicitly listed.

At 1920x1080, Ultra settings are the best choice, averaging 91 FPS. This provides a substantial margin above the 60 FPS threshold and allows for the highest possible visual quality. The minimum FPS at Medium is 101, so Ultra should never drop below 60 FPS, given the 26 FPS difference between the two presets' averages.

The data confirms that this combination is versatile, excelling at 1080p and 1440p with maximum settings, while requiring a modest reduction to Medium at 4K. The Ryzen 5 7400F provides ample CPU performance, and the RTX 3070 Ti delivers sufficient GPU power for most gaming scenarios, with the only compromise occurring at the highest resolution and preset combination.