Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 51 | 59 | 66 | 93 |
| 1440p QHD | 75 | 87 | 98 | 137 |
| 1080p Full HD | 100 | 115 | 129 | 182 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 5 5600F paired with the AMD Radeon RX 9070 delivers a robust 1080p and 1440p experience in Control, but 4K requires careful settings selection. The data shows a clear performance curve where the GPU scales well with resolution, while the 6-core/12-thread Zen 3 processor maintains sufficient headroom across all tested configurations.
Measured FPS Breakdown
At 1920x1080, the combination produces exceptionally high frame rates that will easily satisfy high-refresh-rate monitors. With Low settings, the average FPS reaches 182, which is more than three times the 60 FPS playable threshold. Medium settings drop the average to 129 FPS, with a minimum of 110 FPS and a maximum of 148 FPS. High settings still deliver a very smooth 115 FPS average, while Ultra settings maintain a strong 100 FPS average. The gap between Low and Ultra at 1080p is 82 FPS, indicating that even the most demanding preset leaves substantial performance on the table.
Moving to 2560x1440, the performance remains highly playable across all presets. Low settings produce a 137 FPS average, which is a 24.7% reduction compared to the 1080p Low result. Medium settings average 98 FPS with a minimum of 83 FPS and a maximum of 112 FPS. High settings deliver 87 FPS, while Ultra settings still clear the 60 FPS threshold comfortably with a 75 FPS average. The scaling from 1080p to 1440p is consistent, with each preset losing roughly 25-30 FPS, which suggests the RX 9070's 16 GB of GDDR6 memory and 644.6 GB/s bandwidth handle the increased pixel count efficiently.
At 3840x2160, the picture changes significantly. Low settings remain playable with a 93 FPS average, and Medium settings just barely clear the 60 FPS threshold with a 66 FPS average and a minimum of 56 FPS. However, High settings drop to 59 FPS, which falls below the playable threshold, and Ultra settings average only 51 FPS. The 4K results show a steep drop-off between Medium and High, indicating that the game's higher presets at this resolution push the GPU's 36.13 TFLOPS FP32 compute to its limits. The minimum FPS of 56 at 4K Medium also suggests occasional dips below 60, so users seeking a locked experience may prefer Low settings at this resolution.
Similar Performance Alternatives
The CPU's nearest rivals show that the Ryzen 5 5600F sits in a tightly contested performance band. The Intel Core Ultra 5 225 scores 36938 in average benchmarks, a delta of 0% compared to the 5600F's score. The AMD Ryzen 5 5500X3D scores 37018, which is 0.2% higher, while the AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher. The Intel Core i9-12900T scores 37112, 0.5% higher. All four alternatives fall within a 0.5% performance window, meaning any of these processors would deliver virtually identical frame rates in Control when paired with the same GPU. The Ryzen 5 5600F's PassMark multithread score of 19236 and single-thread score of 2872 place it at the 85th percentile among all CPUs, confirming its position as a solid mid-range performer.
For the GPU, the nearest rivals reveal a similar clustering. The NVIDIA GeForce GTX TITAN Z scores 23736, which is 0.6% lower than the RX 9070's average score. The AMD Radeon RX 6800S scores 24063, 0.8% higher, while the NVIDIA GeForce RTX 3080 Mobile scores 23628, 1.1% lower. The NVIDIA GeForce RTX 2080 SUPER scores 24170, 1.2% higher. These four GPUs bracket the RX 9070's performance within a 2.3% spread, so any of them would produce nearly identical FPS numbers in Control at the same settings. The RX 9070's PassMark G3D score of 25381 and its 69th percentile ranking among all GPUs indicate it performs above the median but not at the top tier.
FAQ
Q: Can this PC run Control at 4K resolution?
A: Yes, but only at Low or Medium settings. The 4K Medium preset averages 66 FPS with a minimum of 56 FPS, while Low averages 93 FPS. High and Ultra presets fall below the 60 FPS playable threshold, averaging 59 FPS and 51 FPS respectively.
Q: What is the best settings preset at 2560x1440?
A: All four presets—Low, Medium, High, and Ultra—are playable at 1440p. The Ultra preset delivers a 75 FPS average, making it the best choice for visual quality while still maintaining smooth gameplay.
Q: How does the 1920x1080 performance compare to the playable threshold?
A: Every preset at 1080p exceeds 60 FPS by a wide margin. The lowest average is 100 FPS at Ultra settings, while Low settings reach 182 FPS. Even the minimum FPS at Medium settings (110 FPS) is nearly double the playable threshold.
Q: Is the CPU or GPU the limiting factor in this game?
A: The GPU is the primary bottleneck at higher resolutions and presets. The FPS drops significantly when moving from 1080p to 4K, while the CPU's 85th percentile ranking among all processors indicates it has sufficient headroom. The 0% to 0.5% deltas among CPU rivals also suggest the processor is not the performance constraint.
Q: What frame rate can I expect at 4K Medium settings?
A: The 4K Medium preset averages 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS. This means the average is above 60 FPS, but there will be occasional dips below the threshold.
Q: How does this combo rank compared to other tested systems?
A: The combination ranks 1134th out of 3720 tested combos for Control, placing it in the top 30.5% of all configurations tested for this game.
The Verdict
This PC can definitively run Control, with the playable resolution depending on your settings preferences. At 1920x1080, every preset from Low to Ultra clears the 60 FPS threshold, with the Ultra preset achieving a 100 FPS average. This makes 1080p the ideal resolution for maximum visual fidelity without any performance concerns.
At 2560x1440, the system remains fully playable across all four presets. The Ultra preset delivers a 75 FPS average, which is 25% above the playable threshold. Even the most demanding settings at this resolution provide smooth gameplay, making 1440p the sweet spot for balancing visual quality and performance.
At 3840x2160, the verdict is more nuanced. Low and Medium presets are playable, with averages of 93 FPS and 66 FPS respectively. However, High settings drop to 59 FPS and Ultra falls to 51 FPS, both below the 60 FPS threshold. The Medium preset is the recommended choice for 4K, offering a 66 FPS average, though users who prioritize smoothness over visuals should select Low for a more comfortable margin above the threshold.
How This Combo Ranks
The combination of the AMD Ryzen 5 5600F and AMD Radeon RX 9070 ranks 1134th out of 3720 tested combos for Control, placing it in the 69.5th percentile of all configurations. This ranking reflects a system that performs well above the median but does not reach the top tier of hardware combinations. The GPU's 69th percentile ranking among all GPUs and the CPU's 85th percentile ranking among all CPUs together produce a balanced system that excels at mainstream resolutions.
The ranking is consistent with the measured FPS data, which shows strong performance at 1080p and 1440p but only marginal playability at 4K. Systems ranked higher likely feature more powerful GPUs that can sustain 60 FPS at 4K Ultra settings, while lower-ranked systems would struggle at 1440p. The 3720 total combos tested provide a broad comparison base, and this combo's position indicates it outperforms roughly 70% of tested configurations for this specific game.
CPU and GPU Roles
The performance scaling between resolutions reveals that the GPU dominates the performance equation in Control. Moving from 1080p to 1440p reduces average FPS by approximately 25-30% across all presets, and moving from 1440p to 4K reduces it by another 30-35%. This consistent scaling pattern indicates that the RX 9070's rendering throughput, rather than the CPU's processing capability, determines frame rates.
At 1080p Low settings, the 182 FPS average suggests the CPU is capable of feeding the GPU well beyond what most monitors can display. The Ryzen 5 5600F's 12 threads and 32 MB of shared L3 cache provide ample processing power for Control's physics and AI systems at this resolution. The 85th percentile CPU ranking further supports this, showing the processor is not a limiting factor at lower resolutions.
At 4K, the GPU becomes the clear bottleneck. The 51 FPS average at Ultra settings indicates the RX 9070's 3584 shading units and 128 ROPs cannot maintain 60 FPS when rendering the game's full visual effects at 3840x2160. The CPU's role diminishes further at this resolution, as the GPU takes longer to render each frame, giving the processor more time to prepare subsequent frames. The 59 FPS average at 4K High, compared to 66 FPS at Medium, demonstrates that the GPU's workload increases substantially with each preset level, while the CPU's workload remains relatively constant.
The minimum FPS data at Medium settings further illustrates this dynamic. At 1080p Medium, the minimum is 110 FPS, which is 85% of the average. At 1440p Medium, the minimum is 83 FPS, 85% of the average. At 4K Medium, the minimum is 56 FPS, also 85% of the average. This consistent ratio across resolutions indicates that frame time variance scales proportionally with the GPU workload, reinforcing the conclusion that the GPU is the primary performance driver in Control.