Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
71 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
66 FPS
Ultra 4K Measured
36 FPS
12.2ms Frame Time
18ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 36,945
Graphics Card
Required 27,787
Your GPU 16,014

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 42 47 66
1440p QHD 54 62 70 98
1080p Full HD 71 82 92 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 82
1920x1080 Low 130
1920x1080 Medium 92
1920x1080 Ultra 71
2560x1440 High 62
2560x1440 Low 98
2560x1440 Medium 70
2560x1440 Ultra 54
3840x2160 High 42
3840x2160 Low 66
3840x2160 Medium 47
3840x2160 Ultra 36

Performance Analysis: Control on Your System

The AMD Ryzen 5 5600F and AMD Radeon RX 9060 combination delivers a workable, if not consistently high-end, experience in Control. The data indicates a system that is firmly capable at 1080p, partially constrained at 1440p, and only playable at the lowest settings for 4K. The pairing shows a clear performance hierarchy where the GPU becomes the primary bottleneck as resolution increases.

Similar Performance Alternatives

Based on aggregate benchmark scores, the AMD Ryzen 5 5600F sits in a tight cluster of comparable processors. Its average benchmark score of 36945 is virtually identical to the Intel Core Ultra 5 225, which scores 36938 (a delta of 0%). The AMD Ryzen 5 5500X3D is marginally ahead at 37018 (0.2% faster), while the AMD Ryzen AI 7 PRO 450 (37093) and Intel Core i9-12900T (37112) are 0.4% and 0.5% faster, respectively. For gaming workloads, any of these CPUs would present a negligible performance difference, meaning the 5600F is not a unique bottleneck or advantage in this class.

On the GPU side, the AMD Radeon RX 9060’s average score of 16014 places it near the NVIDIA GeForce RTX 3060 Ti, which scores 16129 (0.7% higher). The gap is small enough that these two cards would trade blows in real-world scenarios. Interestingly, the RX 9060 is 1% faster than both the AMD Radeon R9 370X (15862) and the AMD Radeon RX 7700 (15852), and 2.1% faster than the AMD Radeon Pro W5500 (15679). For Control, a user moving from an RTX 3060 Ti to this RX 9060 should expect nearly identical frame rates, while the RX 7700 would be a slight downgrade in raw throughput.

CPU and GPU Roles

The benchmark data reveals a classic resolution-dependent shift in workload balance. At 1920x1080, the system achieves an average of 130 FPS on Low settings and 71 FPS on Ultra. This wide spread suggests the GPU is the limiting factor even at the lowest settings, as the CPU has enough headroom to feed the graphics card. However, the CPU’s role becomes more apparent when comparing the 1080p Low (130 FPS) to the 1440p Low (98 FPS) result. The drop of 32 FPS (approximately 25%) when moving from 1080p to 1440p indicates that the GPU is still the primary constraint, but the CPU is not fully idle either.

At 4K, the situation is unambiguous. The 3840x2160 Low setting yields 66 FPS, while 1440p Low yields 98 FPS. This 32 FPS drop (about 33%) is much larger than the 1440p-to-1080p drop, confirming that the RX 9060 is overwhelmed by the pixel count. The CPU’s contribution is nearly negligible at 4K, as the frame rate is dictated almost entirely by the GPU’s fill rate and shading capacity. Conversely, at 1080p, the gap between Low (130 FPS) and Medium (92 FPS) is 38 FPS, showing that the GPU is still the dominant factor even at the lowest resolution tested, with the CPU providing sufficient support.

Measured FPS Breakdown

At 1920x1080, the combination performs admirably. The Low preset delivers an average of 130 FPS, which is excellent for high-refresh-rate monitors. Moving to Medium drops the average to 92 FPS, with a minimum of 78 FPS and a maximum of 106 FPS. High settings yield 82 FPS, and Ultra produces 71 FPS. All four presets clear the 60 FPS playable threshold, making 1080p a fully playable resolution regardless of visual quality preference.

At 2560x1440, the performance becomes more nuanced. Low settings average 98 FPS, which is still very smooth. Medium averages 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS — the minimum dips just below 60 FPS, indicating occasional stutter in demanding scenes. High settings average 62 FPS, which is playable but leaves little headroom. Ultra drops to 54 FPS, which falls short of the 60 FPS target. The data shows that 1440p is playable from Low through High, but Ultra requires a compromise.

At 3840x2160, the RX 9060 struggles. Low settings average 66 FPS, which is just above the 60 FPS threshold. Medium averages 47 FPS, with a minimum of 40 and a maximum of 54 — all below playable. High averages 42 FPS, and Ultra averages 36 FPS. Only the Low preset is viable at 4K, and even then, the 66 FPS average suggests that demanding scenes could occasionally dip below 60 FPS.

How This Combo Ranks

The combination ranks 2152 out of 3720 tested combos in Control. This places it in the lower-middle tier of the database, indicating that while it is not a high-end rig, it is also far from the bottom. Given that the GPU’s percentile ranking is 59 (meaning it outperforms 59% of all GPUs) and the CPU’s percentile is 85 (outperforming 85% of all CPUs), the overall combo rank is dragged down by the GPU’s relative weakness. The CPU is clearly the stronger component, but the RX 9060 limits the system’s overall capability in this GPU-bound title. The rank suggests that a significant portion of tested configurations deliver higher frame rates, but the 5600F + RX 9060 still provides a playable experience at the lower resolutions.

FAQ

*Q: Can this PC run Control at 4K with max settings?*

A: No. At 3840x2160 with Ultra settings, the average FPS is 36, which is well below the 60 FPS playable threshold. Even High settings only reach 42 FPS, and Medium averages 47 FPS. Only Low settings (66 FPS) are playable at 4K.

Q: What is the best preset for 1440p gaming?

A: The High preset is the most demanding option that stays at or above 60 FPS, averaging 62 FPS at 2560x1440. Medium averages 70 FPS, and Low averages 98 FPS, but High offers the best visual quality while remaining playable.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: The GPU is the primary bottleneck. At 1920x1080, the frame rate drops from 130 FPS on Low to 71 FPS on Ultra, a 45% reduction. This scaling is entirely attributable to the GPU’s rendering workload, as the CPU’s single-thread score of 2872 and multithread score of 19236 provide ample headroom.

Q: How does the RX 9060 compare to the RTX 3060 Ti in this game?

A: The RX 9060 has an average benchmark score of 16014, while the RTX 3060 Ti scores 16129, making the RTX 3060 Ti 0.7% faster. In practical terms, this difference is negligible, and both cards would produce nearly identical frame rates in Control.

Q: What is the minimum FPS at 1080p Medium?

A: The minimum FPS at 1920x1080 with Medium settings is 78 FPS, with an average of 92 FPS and a maximum of 106 FPS. This indicates a consistent experience with no noticeable dips below the playable threshold.

Q: Should I play at 4K Low or 1440p Ultra?

A: 4K Low averages 66 FPS, while 1440p Ultra averages 54 FPS. The 4K Low preset runs faster, but the visual quality difference between 4K Low and 1440p Ultra is subjective. If you prioritize frame rate, 4K Low is the choice; if you prefer higher detail, 1440p Ultra will look sharper up close.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the most demanding option that maintains a playable frame rate, averaging 71 FPS. This is the recommended setting for maximum visual fidelity at the lowest resolution.

At 2560x1440, the High preset is the best balance, averaging 62 FPS. This provides a significant visual upgrade over Medium (70 FPS) while staying above the 60 FPS threshold. Ultra (54 FPS) is not recommended due to the sub-60 FPS average.

At 3840x2160, only the Low preset is playable, averaging 66 FPS. Medium (47 FPS), High (42 FPS), and Ultra (36 FPS) all fall below the playable threshold. Users at 4K must accept Low settings or reduce the resolution.

The Verdict

This PC can run Control, but the experience varies drastically by resolution. At 1920x1080, the system is fully capable, with all presets — Low (130 FPS), Medium (92 FPS), High (82 FPS), and Ultra (71 FPS) — clearing the 60 FPS target. At 2560x1440, the High preset (62 FPS) is the highest playable option, while Low (98 FPS) and Medium (70 FPS) also work; Ultra (54 FPS) does not. At 3840x2160, the situation is limited to the Low preset (66 FPS), with Medium (47 FPS), High (42 FPS), and Ultra (36 FPS) all failing to reach 60 FPS. The data indicates that this combo is best suited for 1080p gaming, where it offers a smooth experience at any setting, and it can handle 1440p with reasonable compromises. 4K is only viable with significant visual sacrifices. The CPU is not a limiting factor in this title, as its performance is sufficient to feed the GPU at all tested resolutions and settings.