Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 73 | 84 | 118 |
| 1440p QHD | 94 | 111 | 121 | 171 |
| 1080p Full HD | 126 | 141 | 161 | 215 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 5 5600 and NVIDIA GeForce RTX 4070 Ti combination delivers a definitive answer for Control: this PC runs the game at 60 FPS or higher across every tested resolution and preset. At 4K Ultra, the average frame rate lands at 62.4 FPS, clearing the 60 FPS threshold with a narrow margin, while lower resolutions provide substantial headroom. The data indicates that this pairing is more than sufficient for a smooth experience, with the GPU being the primary performance driver at higher resolutions, though the CPU's capabilities ensure no bottleneck at 1080p.
Similar Performance Alternatives
The AMD Ryzen 5 5600 sits at the 74th percentile among all CPUs, with an average benchmark score of 20,468. Its nearest rivals in synthetic testing are remarkably close: the Intel Core Ultra 7 258V scores 20,454 (a 0.1% difference), the AMD Ryzen 5 8500G scores 20,425 (0.2% difference), the AMD EPYC 9454P scores 20,422 (0.2% difference), and the AMD EPYC 7713 scores 20,363 (0.5% difference). In practical terms, these processors would deliver nearly identical CPU-bound performance in Control, meaning any of them paired with the same GPU would produce similar frame rates at 1080p where the CPU load is relatively higher.
On the GPU side, the RTX 4070 Ti ranks at the 84th percentile among all GPUs with an average benchmark score of 44,795. Its nearest rivals show a tight cluster: the NVIDIA GeForce RTX 5090 Mobile scores 45,152 (0.8% higher), the AMD Radeon Pro 5500 XT scores 45,384 (1.3% higher), the NVIDIA RTX A6000 scores 44,075 (1.6% lower), and the Intel Arc A730M scores 45,592 (1.7% higher). For Control specifically, these GPUs would behave comparably, with the RTX A6000 being the closest match in raw compute terms. However, the RTX 4070 Ti's specific architecture and driver optimization for gaming likely gives it an edge in actual game benchmarks, despite the synthetic scores being so close.
The combination of this CPU and GPU places the pair at rank 531 out of 3,720 tested combos in Control, placing it in the top 14% of all tested configurations. This ranking is driven primarily by the GPU's strong performance, as the CPU's percentile rank is lower than the GPU's, indicating that the graphics card is the more influential component in this pairing.
FAQ
Q: Can this PC run Control at 4K with maximum settings?
A: Yes, the average frame rate at 3840x2160 with Ultra settings is 62.4 FPS, which exceeds the 60 FPS playable threshold. All four settings presets (Low, Medium, High, Ultra) at 4K are listed as playable.
Q: What is the best settings preset for 1440p gaming?
A: At 2560x1440, all presets are playable, with Ultra delivering an average of 93.7 FPS. This is the recommended option since it provides the highest visual quality while maintaining a comfortable margin above 60 FPS.
Q: How much performance headroom exists at 1080p?
A: At 1920x1080, even the most demanding Ultra preset averages 125.8 FPS, while Low settings reach 214.6 FPS. This indicates the system has significant headroom for high-refresh-rate monitors at 1080p.
Q: Does the CPU or GPU limit performance more in this game?
A: The GPU is the primary limiting factor at higher resolutions. At 4K, the frame rate drops from 214.6 FPS (1080p Low) to 117.6 FPS (4K Low), a 45% reduction, while the CPU remains constant. The CPU's 6 cores and 12 threads are sufficient to keep up with the GPU across all tested settings.
Q: Is the RTX 4070 Ti significantly faster than its closest rivals?
A: In synthetic benchmarks, the RTX 4070 Ti scores 44,795, while its nearest rival, the RTX A6000, scores 44,075 — a 1.6% disadvantage. The other rivals are within 1.7% either way, meaning real-world performance differences would be minimal.
Q: What is the playable threshold for this game?
A: The playable threshold is defined as 60 FPS. Every resolution and settings combination tested in the measured FPS data exceeds this threshold, with the lowest average being 62.4 FPS at 4K Ultra.
CPU and GPU Roles
The scaling between resolutions and presets reveals a clear division of labor. At 1920x1080, the system achieves 214.6 FPS on Low settings and 125.8 FPS on Ultra, a 41% drop that indicates the GPU is becoming more stressed as settings increase, but the CPU is still feeding frames efficiently. Moving to 2560x1440, the Low preset yields 170.5 FPS (a 21% reduction from 1080p Low), while Ultra drops to 93.7 FPS (a 26% reduction from 1080p Ultra). This proportional scaling continues at 3840x2160, where Low produces 117.6 FPS (31% lower than 1440p Low) and Ultra produces 62.4 FPS (33% lower than 1440p Ultra).
The data shows that the GPU is the dominant factor at every resolution. From 1080p Low to 4K Low, the frame rate drops by 45%, while from 1080p Ultra to 4K Ultra, the drop is 50%. This consistent scaling indicates that the RTX 4070 Ti's rendering load increases predictably with pixel count, and the Ryzen 5 5600's 3.50 GHz base and 4.40 GHz boost clocks are sufficient to avoid becoming a bottleneck. The CPU's 32 MB of shared L3 cache and 12 threads provide adequate bandwidth for game logic and draw calls, but the measured FPS differences between presets are almost entirely attributable to GPU workload.
At 1080p, the CPU's role is more visible: the gap between Low (214.6 FPS) and Ultra (125.8 FPS) is 88.8 FPS, a 41% difference that reflects the increased GPU work from higher settings. At 4K, the same comparison shows a 55.2 FPS gap (from 117.6 to 62.4), a 47% difference, indicating that the GPU is still the limiting factor even at the highest resolution. This suggests that upgrading the CPU would yield minimal gains, while upgrading the GPU would proportionally increase frame rates across all settings.
The Verdict
This PC can absolutely run Control, and it does so with authority. The verdict by resolution confirms that all tested settings at all three resolutions—1920x1080, 2560x1440, and 3840x2160—are playable, meaning they exceed the 60 FPS threshold. The best settings at each resolution are Ultra, with average frame rates of 125.8 FPS at 1080p, 93.7 FPS at 1440p, and 62.4 FPS at 4K. The 4K Ultra result is the most marginal, clearing 60 FPS by only 2.4 frames per second, which means players seeking a more consistent experience at 4K might prefer High settings at 72.9 FPS for additional headroom. At 1440p and below, the system has substantial performance reserves, making it suitable for high-refresh-rate displays at those resolutions.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across resolutions and settings. At 3840x2160, the average frame rates are: Low at 117.6 FPS, Medium at 83.8 FPS, High at 72.9 FPS, and Ultra at 62.4 FPS. The progression from Low to Ultra shows a 47% reduction in frame rate, highlighting the significant GPU load at 4K. No minimum or maximum FPS values are recorded in the dataset, so the analysis relies solely on average performance.
At 2560x1440, the results are: Low at 170.5 FPS, Medium at 121.2 FPS, High at 110.9 FPS, and Ultra at 93.7 FPS. The spread between Low and Ultra is 76.8 FPS, or 45%, which is consistent with the 4K scaling. This resolution offers the best balance between visual fidelity and performance, with Ultra still providing a comfortable 33.7 FPS margin above the playable threshold.
At 1920x1080, the average frame rates are: Low at 214.6 FPS, Medium at 161.2 FPS, High at 140.7 FPS, and Ultra at 125.8 FPS. The Low preset exceeds 200 FPS, making it suitable for 240 Hz monitors, while Ultra stays above 120 FPS for high-refresh-rate gaming. The gap between Low and Ultra is 88.8 FPS, or 41%, which is the smallest percentage difference among all resolutions, indicating that the CPU is beginning to play a more significant role at this resolution.
How This Combo Ranks
This specific CPU-GPU combination ranks 531 out of 3,720 tested combos in Control, placing it in the 86th percentile of all configurations tested. This is a strong result, especially considering the CPU's 74th percentile ranking and the GPU's 84th percentile ranking individually. The combo outperforms what either component's individual percentile might suggest, indicating that the pairing is particularly well-suited for this game. The high rank is driven by the GPU's ability to maintain high frame rates even at 4K Ultra, combined with the CPU's sufficient single-thread performance to avoid limiting the frame rate at lower resolutions.
In the context of the nearest rival components, this combo would likely outperform configurations using the RTX A6000 (the closest GPU rival with a 1.6% lower score) or any of the CPU rivals, since the RTX 4070 Ti's gaming-specific optimizations and the Ryzen 5 5600's strong single-core performance (2,584 in Cinebench R23 single-core) create a balanced system. The rank of 531 out of 3,720 means that only 14% of tested combinations deliver better performance in Control, cementing this as a high-end configuration for this title.