Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 58 | 66 | 75 | 105 |
| 1440p QHD | 85 | 98 | 111 | 156 |
| 1080p Full HD | 113 | 130 | 146 | 196 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5070 combination delivers a compelling performance profile for Control, a 2019 Action Adventure title. The measured data indicates that this pairing is capable of high frame rates across all tested resolutions, though the margin of headroom varies significantly depending on the resolution and quality preset. This analysis breaks down the specific numbers to determine the optimal settings and where the bottleneck lies.
Best Settings per Resolution
The data shows a clear tiering of performance across the three resolutions tested. At 3840x2160 (4K), the most demanding preset that maintains an average of at least 60 FPS is High, which achieves an average of 66 FPS. While the Medium preset also clears the threshold with an average of 75 FPS, High is the superior choice as it offers the best visual quality without dropping below the playable threshold. The Ultra preset at this resolution falls short, with an average of 58 FPS, which is below the 60 FPS target.
At 2560x1440 (1440p), the story changes. The hardware has ample headroom, allowing the Ultra preset to be the best option, delivering an average of 85 FPS. This is a significant jump from the 4K result, showcasing that the RTX 5070 is well-suited for high-refresh-rate gaming at this resolution. Every preset from Low to Ultra is playable, meaning users can prioritize visual fidelity without sacrificing smoothness.
For 1920x1080 (1080p), the combination is exceptionally powerful. The best settings are again Ultra, with an impressive average of 113 FPS. This high frame rate suggests that the system is not being stressed at this resolution, leaving substantial performance on the table. The data reveals a consistent pattern: as resolution decreases, the maximum playable preset and the corresponding frame rate both increase, moving from High at 4K to Ultra at both 1440p and 1080p.
CPU and GPU Roles
Determining which component is the primary driver requires analyzing the scaling between resolutions and presets. The performance drop from 1080p to 1440p is moderate, but the drop from 1440p to 4K is substantial, indicating a growing reliance on the GPU. For instance, at the Ultra preset, the average FPS goes from 113 at 1080p, to 85 at 1440p, down to 58 at 4K. This steep decline as pixel count increases is a classic sign of a GPU-bound scenario.
Conversely, the CPU's role becomes more apparent at lower resolutions. At 1080p, the difference between Low and Ultra settings is from 196 FPS to 113 FPS. While this is a significant gap, the fact that even the Low preset does not push to 200+ FPS suggests a potential CPU limitation at this resolution. The Ryzen 5 5500X3D, with its 6 cores and 12 threads, is likely the constraining factor at 1080p, preventing the GPU from achieving even higher frame rates.
The data implies a shift in the bottleneck. At 4K, the RTX 5070 is the limiting factor, as the resolution demands more from the GPU's memory bandwidth and processing power. At 1080p, the AMD processor becomes more significant, as the GPU is capable of rendering frames faster than the CPU can feed it. The 1440p resolution appears to be the sweet spot where the workload is balanced enough to allow both components to work efficiently, resulting in the 85 FPS average on Ultra.
Measured FPS Breakdown
The complete set of measured frames per second data provides a detailed view of the system's performance envelope.
At 1920x1080, the average frame rates are as follows: Low settings produce 196 FPS, Medium settings produce 146 FPS, High settings produce 130 FPS, and Ultra settings produce 113 FPS. The only min/max data provided for this resolution is for the Medium preset, which shows a minimum of 124 FPS and a maximum of 168 FPS. This narrow range between min and max suggests consistent frame pacing.
Moving to 2560x1440, the averages are: Low settings at 156 FPS, Medium settings at 111 FPS, High settings at 98 FPS, and Ultra settings at 85 FPS. The Medium preset here has a min of 94 FPS and a max of 127 FPS. The gap between the minimum and average FPS at this resolution is larger than at 1080p, indicating more variance in frame times, likely due to more complex scenes taxing the GPU.
At 3840x2160, the averages drop considerably: Low settings yield 105 FPS, Medium settings yield 75 FPS, High settings yield 66 FPS, and Ultra settings yield 58 FPS. The Medium preset shows a min of 63 FPS and a max of 86 FPS. Notably, the minimum frame rate of 63 FPS for Medium is very close to the average of 66 FPS for High, suggesting that while High averages higher, its frame pacing may be less stable than Medium's.
The Verdict
The benchmark data provides a definitive answer: this PC can absolutely run Control. According to the verdictByResolution data, the system clears the 60 FPS threshold at all three tested resolutions, but with different levels of visual fidelity.
At 3840x2160, the system is playable, but the options are limited. The playable settings are High, Low, and Medium, with the best playable setting being High, which achieves an average of 66 FPS. While playable, the inability to run Ultra at 4K without dipping below 60 FPS means users with 4K displays will have to make a compromise on visual quality for smooth performance.
At 2560x1440 and 1920x1080, the system is unequivocally a high-performance machine for this game. All four presets from Low to Ultra are playable. The best setting for both is Ultra, with averages of 85 FPS at 1440p and 113 FPS at 1080p. This indicates that for the vast majority of users with 1440p or 1080p monitors, this combination will deliver a flawless, high-refresh-rate experience with all settings maxed out. The verdict is clear: this is a very capable setup for Control, with the only caveat being a desire to lower settings for 4K Ultra gaming.
FAQ
Q: Can this system run Control at 4K with maximum settings?
A: No. At 3840x2160 with the Ultra preset, the average FPS is 58, which falls below the playable threshold of 60 FPS. The High preset is the best playable option at this resolution, delivering an average of 66 FPS.
Q: What is the highest preset that maintains 60 FPS at 2560x1440?
A: The Ultra preset is playable at 1440p, achieving an average of 85 FPS. All lower presets (Low, Medium, High) also exceed the 60 FPS threshold at this resolution.
Q: What is the average frame rate difference between Low and Ultra settings at 1080p?
A: At 1920x1080, the Low preset achieves an average of 196 FPS, while the Ultra preset achieves an average of 113 FPS. This represents a difference of 83 FPS.
Q: Is the GPU or CPU more likely to be the limiting factor at 1080p?
A: The data suggests the CPU is a more significant factor at 1080p. The frame rates are very high (above 113 FPS on Ultra), but the scaling between presets is not as large as at higher resolutions, indicating a potential CPU ceiling preventing the GPU from reaching even higher numbers.
Q: Is there a risk of frame drops below 60 FPS at 1440p on Medium settings?
A: No. The Medium preset at 2560x1440 has a recorded minimum FPS of 94, which is well above the 60 FPS playable threshold.
Q: Does the system meet the performance bar for high refresh rate monitors at 1080p?
A: Yes. Even with the Ultra preset, the average FPS is 113, which is sufficient for a 100Hz or 120Hz monitor. The Low preset, with an average of 196 FPS, is suitable for a 144Hz or 165Hz display.
How This Combo Ranks
Within the database of tested hardware combinations for Control, this pairing of the AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 5070 holds a rank of 804 out of 3720 tested combos. This places it in the top 21.6% of all tested systems, indicating a strong performance tier. The percentile data reinforces this, with the CPU sitting in the 85th percentile of all CPUs and the GPU in the 82nd percentile of all GPUs. The high in-game ranking is consistent with the component-level strengths, suggesting a well-balanced system that performs above average for this specific title.
Similar Performance Alternatives
Examining the nearest rivals for each component provides insight into what other hardware would offer a similar experience. For the processor, the AMD Ryzen 5 5500X3D has an average benchmark score of 37018. The closest competitors are the AMD Ryzen AI 7 PRO 450 with a score of 37093 (a delta of -0.2%), the Intel Core i9-12900T with a score of 37112 (a delta of -0.3%), the AMD Ryzen 5 5600F with a score of 36945 (a delta of 0.2%), and the Intel Core Ultra 5 225 with a score of 36938 (a delta of 0.2%). These processors are effectively performance peers in synthetic benchmarks, meaning a system with any of these would likely perform nearly identically in CPU-bound scenarios.
On the graphics side, the RTX 5070 has an average benchmark score of 40377. Its nearest rivals include the AMD Radeon Pro WX 7100 with a score of 40063 (a delta of 0.8%), the NVIDIA RTX A500 Mobile with a score of 39568 (a delta of 2%), the AMD Radeon Pro 580 with a score of 40318 (a delta of 0.1%), and the AMD Radeon Pro 5300 with a score of 40870 (a delta of -1.2%). Similar to the CPU, these GPUs are close in average performance. While synthetic scores don't perfectly translate to game-specific performance, the deltaPct values indicate that these components would likely deliver a comparable experience in Control, with frame rates falling within a small margin of the measured results for the RTX 5070.