Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Control
Action Adventure 2019

Control

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
107 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
81 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
55 FPS
Ultra 4K Measured
30 FPS
14.7ms Frame Time
22ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,485
Your CPU 37,018
Graphics Card
Required 27,787
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 35 39 55
1440p QHD 45 51 58 81
1080p Full HD 59 68 76 107

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 68
1920x1080 Low 107
1920x1080 Medium 76
1920x1080 Ultra 59
2560x1440 High 51
2560x1440 Low 81
2560x1440 Medium 58
2560x1440 Ultra 45
3840x2160 High 35
3840x2160 Low 55
3840x2160 Medium 39
3840x2160 Ultra 30

Performance Analysis: Control on Your System

Measured FPS Breakdown

The recorded data for Control with this AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 2060 combination shows a clear progression of performance as resolution and settings change. At 1920x1080, the system starts at a strong position: Low settings produce an average of 107 FPS, Medium averages 76 FPS with a minimum of 65 and maximum of 88, High averages 68 FPS, and Ultra drops to an average of 59 FPS. The gap between Low and Medium is 31 FPS, while the step from Medium to High costs another 8 FPS, and High to Ultra costs 9 FPS. The Ultra preset sits just below the 60 FPS threshold, which makes it the only 1080p setting that misses the playable mark.

Moving to 2560x1440, the same pattern continues but with more pronounced losses. Low settings average 81 FPS, Medium averages 58 FPS with a minimum of 49 and maximum of 66, High averages 51 FPS, and Ultra averages 45 FPS. The resolution jump from 1080p to 1440p costs roughly 24% at Low settings (107 to 81 FPS), 24% at Medium (76 to 58 FPS), 25% at High (68 to 51 FPS), and 24% at Ultra (59 to 45 FPS). This consistent scaling suggests the GPU is the dominant factor across all presets at these two resolutions.

At 3840x2160, performance falls below the playable threshold at every setting. Low averages 55 FPS, Medium averages 39 FPS with a minimum of 33 and maximum of 45, High averages 35 FPS, and Ultra averages 30 FPS. The step from 1440p to 4K costs approximately 32% at Low (81 to 55 FPS), 33% at Medium (58 to 39 FPS), 31% at High (51 to 35 FPS), and 33% at Ultra (45 to 30 FPS). The minimum FPS recorded at 4K Medium is 33, which indicates frame pacing issues may become noticeable during intense scenes.

The data shows that this combination can handle 1080p with three of four presets above 60 FPS, 1440p with only Low above 60 FPS, and 4K with no settings reaching playable performance. The Ultra preset at 1080p is the closest miss, averaging 59 FPS, just one frame below the playable threshold.

Similar Performance Alternatives

The CPU benchmarks place the AMD Ryzen 5 5500X3D in a tight cluster with several rivals. The AMD Ryzen 5 5600F scores 36945, a delta of 0.2% from this CPU's average of 37018. The AMD Ryzen AI 7 PRO 450 scores 37093, a delta of -0.2%, meaning it is effectively identical in synthetic workload performance. The Intel Core Ultra 5 225 scores 36938, a delta of 0.2%, and the Intel Core i9-12900T scores 37112, a delta of -0.3%. All four rivals sit within a third of a percent of this CPU, so any of them would produce nearly indistinguishable framerates in Control when paired with the same GPU.

On the GPU side, the NVIDIA GeForce RTX 2060 has an average benchmark score of 15290. Its nearest rivals are the NVIDIA GeForce GTX 580 at 15283 with a delta of 0%, the AMD Radeon 680M at 15270 with a delta of 0.1%, the NVIDIA GeForce RTX 3050 OEM at 15199 with a delta of 0.6%, and the AMD Radeon RX 7600 at 15171 with a delta of 0.8%. The RTX 2060 outperforms all four, but the margins are small enough that gameplay differences would be minimal. The GTX 580 is the closest match, with a delta of exactly 0%, meaning users swapping between these two cards would see nearly identical frame rates in Control.

The practical implication is that a system built with any of these CPU alternatives and any of these GPU alternatives would land within a few FPS of the measurements recorded here. The RTX 3050 OEM and RX 7600 are slightly slower in aggregate benchmarks, so they might deliver one or two frames less at each preset, while the GTX 580 is the most direct comparison for the GPU's gaming behavior.

CPU and GPU Roles

The scaling data reveals which component limits performance in Control at each resolution. At 1920x1080, the transition from Low to Ultra costs 48 FPS (107 to 59), which is a 45% reduction in average frame rate. This large drop from settings changes indicates that the GPU is heavily taxed by the visual features enabled at higher presets. The CPU, with its 6 cores and 12 threads based on Zen 3 architecture, has ample headroom at this resolution.

At 2560x1440, the same settings sweep from Low to Ultra costs 36 FPS (81 to 45), a 44% reduction. The proportional loss is nearly identical to 1080p, which suggests the GPU remains the primary bottleneck. If the CPU were limiting performance, the percentage drop from settings would shrink as resolution increases, because the GPU would take longer per frame and the CPU would have more time to prepare the next frame.

At 3840x2160, the settings sweep from Low to Ultra costs 25 FPS (55 to 30), a 45% reduction. Again, the proportional cost of raising settings is consistent across all three resolutions. This uniformity is a strong indicator that the RTX 2060 is the limiting factor at every resolution and preset combination. The CPU's role is secondary, providing enough throughput to feed the GPU without introducing a bottleneck.

The resolution scaling also supports this conclusion. Moving from 1080p to 1440p reduces FPS by roughly 24% across all presets, and moving from 1440p to 4K reduces FPS by roughly 32% across all presets. The consistent percentages mean that neither component suddenly becomes more or less important as resolution changes. In Control, this combination is GPU-bound across the board, so users seeking higher frame rates should look to GPU settings first rather than CPU-related tweaks.

FAQ

Q: Can this system run Control at 1920x1080 with High settings above 60 FPS?

A: Yes. The recorded average FPS at 1080p High is 68, which clears the 60 FPS playable threshold by 8 frames.

Q: What is the best playable setting at 2560x1440?

A: Low is the only setting at 1440p that stays above 60 FPS, averaging 81 FPS. Medium drops to 58 FPS average, High to 51, and Ultra to 45.

Q: Is 4K playable with this hardware?

A: No. The best 4K result is Low at 55 FPS average, which falls short of the 60 FPS threshold. Medium averages 39 FPS, High 35, and Ultra 30.

Q: How does the RTX 2060 compare to the RX 7600 in this game?

A: The RTX 2060 has a higher average benchmark score of 15290 versus 15171 for the RX 7600, a delta of 0.8%. In Control, this translates to a very small FPS advantage for the RTX 2060, likely one or two frames at most.

Q: What is the minimum FPS recorded in the measurements?

A: The lowest recorded minimum is 33 FPS at 3840x2160 Medium settings. At 2560x1440 Medium the minimum is 49 FPS, and at 1920x1080 Medium the minimum is 65 FPS.

Q: Does the CPU bottleneck the GPU in this game?

A: No. The percentage loss from raising settings is nearly identical across all three resolutions (44% to 45%), which indicates the GPU is the consistent bottleneck. The CPU's 6 cores and 12 threads provide sufficient performance.

How This Combo Ranks

The database places this combination at rank 2950 out of 3720 tested combos for Control. That puts it in the 21st percentile overall, meaning roughly 79% of tested systems deliver higher average frame rates in this game. The rank reflects the RTX 2060's position in the GPU hierarchy, where it sits at the 58th percentile among all GPUs, rather than the CPU, which ranks at the 85th percentile among all CPUs.

The CPU's percentile ranking is notably high, while the GPU's is moderate. This disparity explains why the combo rank is relatively low: the CPU has plenty of headroom, but the GPU limits the final frame rates. Systems with a weaker CPU but a stronger GPU would likely rank higher in Control, since the game is GPU-bound according to the scaling analysis.

For context, the combo rank of 2950 out of 3720 means this system outperforms 770 other tested combinations. In a game like Control, which has demanding visual effects at higher presets, the GPU's 6 GB of GDDR6 memory and 192-bit bus become the deciding factor. The RTX 2060's 30 RT cores and 240 tensor cores do not translate into higher rasterized frame rates at 4K, where the card's 6.451 TFLOPS of FP32 performance is insufficient to maintain 60 FPS even at Low settings.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 68 FPS. Ultra falls to 59 FPS, just below the threshold, so High is the recommended ceiling for a locked experience.

At 2560x1440, the only preset that clears 60 FPS is Low, with an average of 81 FPS. Medium averages 58 FPS, which is close but still below the playable threshold. Users prioritizing smoothness at this resolution should stick with Low.

At 3840x2160, no preset reaches 60 FPS. The closest is Low at 55 FPS average, which is 5 frames short of the playable threshold. None of the 4K settings are recommended for a consistent 60 FPS experience.

The data shows a clear pattern: each resolution step down in settings is required to maintain playability. At 1080p, three presets are playable. At 1440p, only one. At 4K, zero.

The Verdict

This system can run Control, but the experience depends heavily on the chosen resolution and settings. At 1920x1080, the verdict is positive: High settings average 68 FPS, Medium averages 76 FPS, and Low averages 107 FPS, all comfortably above the 60 FPS playable threshold. Ultra at 1080p averages 59 FPS, which is a marginal miss but still close to playable.

At 2560x1440, the verdict is conditional. Low settings average 81 FPS, which is playable, but Medium drops to 58 FPS, High to 51 FPS, and Ultra to 45 FPS. Users who want 1440p will need to accept Low settings for a smooth experience.

At 3840x2160, the verdict is negative. No setting achieves 60 FPS, with Low at 55 FPS being the best result. The RTX 2060 does not have enough performance for 4K gaming in Control.

The benchmark data indicates this combo is best suited for 1080p gaming with high or medium presets, or 1440p with low settings. The CPU is not the limiting factor; the GPU's performance ceiling defines what is achievable. For users targeting 1440p or 4K, a stronger GPU would be necessary to unlock higher presets while maintaining 60 FPS.