Instant compatibility check with FPS benchmarks and optimization tips
Control
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 18 | 20 | 23 | 32 |
| 1440p QHD | 26 | 30 | 34 | 48 |
| 1080p Full HD | 35 | 40 | 45 | 63 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Control on Your System
Similar Performance Alternatives
The AMD Ryzen 5 3600 sits in a dense performance neighborhood according to the database’s aggregate CPU benchmarks. Its average benchmark score of 17035 places it within a fraction of a percent of several very different processors. The closest match is the Intel Core i7-1260P, which scores 17007, a delta of only 0.2 percent. That mobile-class chip effectively trades blows with the desktop Ryzen 5 3600 in the database’s multi-threaded and single-threaded workloads. The Intel Core i5-11400 is essentially identical in average score at 17067, sitting 0.2 percent ahead. Two server-grade EPYC parts, the AMD EPYC 7573X and AMD EPYC 7742, also appear in the same band with scores of 17070 and 16998 respectively, each within 0.2 percent of the Ryzen 5 3600. For a buyer looking at the Ryzen 5 3600, any of these four chips would produce nearly indistinguishable CPU-bound behavior in most games, though the EPYC parts are obviously not desktop-oriented products.
On the GPU side, the AMD Radeon RX 580’s average benchmark score of 12928 puts it directly between several well-known graphics cards. The NVIDIA GeForce RTX 3050 Ti Mobile scores 12940, a mere 0.1 percent higher. The NVIDIA GeForce GTX 1660 SUPER is 0.4 percent ahead with a score of 12986, meaning that in many titles the RX 580 and GTX 1660 SUPER will land within a few frames of each other. The AMD Radeon 740M integrated graphics score 12870, 0.5 percent lower, and the AMD FirePro W5100 scores 12847, 0.6 percent lower. These four GPUs represent the performance envelope around the RX 580: if a system with an RX 580 were swapped for a GTX 1660 SUPER, the user would see a very small uplift on average; swapping to a Radeon 740M would cost a similarly small amount of performance.
What this means for Control specifically is that the Ryzen 5 3600 and RX 580 combination behaves much like several other pairings. A system built around an Intel Core i5-11400 or i7-1260P with a GTX 1660 SUPER would likely produce nearly identical frame rates in this game, since both the CPU and GPU are within a fraction of a percent of the tested parts. The database’s measured FPS for this combo therefore serves as a reliable proxy for that broader family of mid-range hardware from the 2019-2021 era.
CPU and GPU Roles
Control is a demanding title, and the recorded data shows a clear pattern: the GPU is the dominant constraint at every resolution tested, with the CPU having little room to matter given the RX 580’s limits. Look at the scaling from 1920x1080 to 2560x1440 to 3840x2160 at the same settings. At Low settings, the average FPS drops from 63 at 1080p to 48 at 1440p, a 24 percent reduction, then to 32 at 4K, a further 33 percent drop. At Medium settings, the progression is 45, 34, and 23 FPS across the three resolutions. At High, it is 40, 30, and 20. At Ultra, it is 35, 26, and 18.
This steep falloff as resolution increases is classic GPU-bound behavior. The pixel count rises dramatically from 1080p to 4K (about four times as many pixels), and the RX 580 simply cannot maintain playable frame rates beyond 1080p. The CPU, a Ryzen 5 3600 with 6 cores and 12 threads, is well above the minimum requirement for most games of this era, and its benchmark scores (Cinebench R23 multi-core 15045, single-core 2124) indicate a capable processor. But in Control at these settings, the CPU is never the limiting factor. If the CPU were the bottleneck, we would expect to see similar frame rates across resolutions, since resolution does not change CPU workload. Instead, the frame rates fall by roughly 30 to 40 percent each time resolution doubles, which points squarely at the GPU.
The settings presets also tell the same story. At 1080p, going from Low to Medium reduces the average FPS from 63 to 45, a 29 percent drop. Low to High goes from 63 to 40, a 37 percent drop. Low to Ultra goes from 63 to 35, a 44 percent drop. These are large reductions for a single settings tier, confirming that the RX 580’s shading units (2304), texture units (144), and memory bandwidth (256 GB/s) are fully saturated by Control’s visual effects. The CPU’s role is secondary: it feeds the GPU with draw calls and physics data, but at these frame rates (18 to 63 FPS), the Ryzen 5 3600 has ample headroom. In a hypothetical scenario with a much faster GPU, the Ryzen 5 3600 might become a limiting factor, but with the RX 580, the GPU is the bottleneck at every resolution and preset.
How This Combo Ranks
The database ranks this exact CPU-GPU combination for Control at position 3399 out of 3720 tested combos. That places it in the lower 9 percent of all systems in the database for this specific game. In other words, roughly 91 percent of tested CPU-GPU pairs achieve higher average frame rates in Control than this Ryzen 5 3600 plus RX 580 setup. The ranking is not a measure of the CPU or GPU in isolation; it reflects the combined result of this pairing under Control’s specific rendering demands. Given that the RX 580 is an end-of-life product from 2017 and the Ryzen 5 3600 is a 2019 mid-range CPU, the low rank is not surprising. The database’s aggregate GPU percentile for the RX 580 is 53, meaning it outperforms about half of all GPUs in general benchmarks, but Control is a demanding title that exposes its weaknesses. The CPU’s percentile against all CPUs is 71, showing that the processor is relatively stronger than the graphics card within this pairing. The GPU is the anchor on performance, and the rank reflects that imbalance.
The Verdict
Can this PC run Control? The answer depends entirely on the resolution and settings. The database’s verdict by resolution is clear. At 3840x2160 (4K), there are no playable settings. None of the four presets (Low, Medium, High, Ultra) reach 60 FPS. The best measured average at 4K is 32 FPS on Low, which is far below the playable threshold of 60 FPS. At 2560x1440 (1440p), the situation is identical: no settings are playable. The highest average is 48 FPS on Low, still 12 FPS short of 60. Only at 1920x1080 (1080p) does the system find a playable configuration. The Low preset averages 63 FPS, which meets the 60 FPS threshold. Medium, High, and Ultra all fall below 60, with averages of 45, 40, and 35 respectively. So the verdict is: yes, this PC can run Control, but only at 1080p with the Low preset. For 1440p or 4K, users would need to lower expectations dramatically or accept sub-60 frame rates.
Measured FPS Breakdown
The recorded data provides average FPS for all presets at all three resolutions, with min and max values available for the Medium preset at each resolution.
At 1920x1080:
- Low: average 63 FPS
- Medium: average 45 FPS, minimum 38, maximum 51
- High: average 40 FPS
- Ultra: average 35 FPS
At 2560x1440:
- Low: average 48 FPS
- Medium: average 34 FPS, minimum 29, maximum 39
- High: average 30 FPS
- Ultra: average 26 FPS
At 3840x2160:
- Low: average 32 FPS
- Medium: average 23 FPS, minimum 19, maximum 26
- High: average 20 FPS
- Ultra: average 18 FPS
The min and max values for Medium at each resolution show a fairly narrow band. At 1080p, the frame time variance is 38 to 51, a 13 FPS spread. At 1440p, it is 29 to 39, a 10 FPS spread. At 4K, it is 19 to 26, a 7 FPS spread. This suggests that even when the average is below playable, the frame pacing is relatively consistent, without severe stutters. However, the user will experience noticeable slowdowns during intense scenes at 4K, where the minimum of 19 FPS is barely a slideshow. At 1080p Medium, the minimum of 38 FPS means that even if the average were higher, there would be moments that feel choppy.
Best Settings per Resolution
For each resolution, the best settings are defined as the most demanding preset that maintains an average of at least 60 FPS.
At 3840x2160, no preset reaches 60 FPS. The best average is 32 FPS on Low, which is not playable. Therefore, there is no recommended setting at 4K; the system should not be used at this resolution for Control.
At 2560x1440, the same applies. The highest average is 48 FPS on Low, which is below 60. No preset is playable. The system cannot deliver a smooth experience at 1440p.
At 1920x1080, the Low preset averages 63 FPS, which clears the 60 FPS threshold. Medium drops to 45 FPS, so it is not acceptable if the goal is 60 FPS. Therefore, the best settings at 1080p are Low, with an average FPS of 63. This is the only resolution and preset combination in the entire dataset that meets the playable threshold.
Users who are willing to accept lower frame rates might consider 1080p Medium (45 FPS) or even 1440p Low (48 FPS), but the database’s verdict strictly requires 60 FPS for playability. Given that, the answer is unambiguous: Low at 1080p, nothing else.
FAQ
Q: What is the highest average FPS this system achieves in Control?
A: The highest average FPS recorded is 63, achieved at 1920x1080 with the Low preset. This is the only configuration that meets the 60 FPS playable threshold.
Q: Can this system run Control at 2560x1440?
A: No. At 2560x1440, the best average is 48 FPS on Low, which is below 60. Medium averages 34, High averages 30, and Ultra averages 26. None of these reach playable levels.
Q: How does the RX 580 compare to the GTX 1660 SUPER in the database?
A: The RX 580 has an average benchmark score of 12928, while the GTX 1660 SUPER scores 12986, a delta of 0.4 percent. In practical terms, the GTX 1660 SUPER would perform nearly identically to the RX 580 in most games, including Control.
Q: Is the Ryzen 5 3600 the bottleneck in this system for Control?
A: No. The data shows that frame rates drop sharply as resolution increases (from 63 FPS at 1080p Low to 32 FPS at 4K Low), which indicates the GPU is the limiting factor. The CPU’s benchmark percentile (71) is much higher than the GPU’s (53), suggesting the GPU is the weaker component.
Q: What are the minimum and maximum FPS at 1080p Medium?
A: At 1920x1080 with Medium settings, the average FPS is 45, with a minimum of 38 and a maximum of 51. This means the experience is inconsistent, with drops below 40 FPS during demanding scenes.
Q: Is the RX 580 a current product?
A: No. The database lists the RX 580’s production status as end-of-life. Its release date was April 2017, and its successor is the Vega architecture. The GPU is no longer in production, though it remains a common sight in older systems.