Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 50 | 70 | 83 | 110 |
| 1440p QHD | 96 | 139 | 161 | 216 |
| 1080p Full HD | 156 | 219 | 255 | 341 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 4060 is an overwhelmingly capable combination for Barony, delivering playable frame rates at every tested resolution and preset, with the sole exception of 4K Ultra. The data shows this system ranks 2025th out of 3717 tested combinations for this title, placing it in the upper half of all hardware pairings. At 1080p and 1440p, the system clears the 60 FPS threshold with substantial headroom, while 4K requires dropping from Ultra to High settings to maintain smooth gameplay.
Measured FPS Breakdown
The measured performance data reveals a clear scaling pattern across resolutions and presets. At 1920x1080, the system produces exceptional frame rates regardless of settings. Low settings yield an average of 340.8 FPS, Medium drops to 255.2 FPS, High produces 218.5 FPS, and Ultra still manages a very strong 156 FPS. The gap between Low and Ultra is roughly 185 FPS, indicating that even the most demanding preset leaves enormous performance reserves at this resolution.
Moving to 2560x1440, the frame rates remain high but show the expected impact of increased pixel count. Low settings average 215.6 FPS, Medium delivers 160.9 FPS, High reaches 138.7 FPS, and Ultra settles at 96 FPS. The scaling from 1080p to 1440p reduces performance by approximately 35-40% across all presets, which is consistent with the 1.78x pixel count increase. Even at 1440p Ultra, the system maintains nearly 100 FPS, making this resolution entirely comfortable for high-refresh-rate displays.
At 3840x2160, the performance picture changes more dramatically. Low settings produce 110.1 FPS, Medium drops to 82.5 FPS, and High averages 69.5 FPS. However, Ultra settings fall below the playable threshold at 49.8 FPS, marking the only configuration in the entire test matrix that fails to maintain 60 FPS. The step from High to Ultra at 4K represents a loss of roughly 20 FPS, a larger relative drop than at lower resolutions, suggesting the Ultra preset introduces effects that disproportionately tax the GPU at higher pixel counts.
The minimum and maximum FPS values are not available in the dataset, so all analysis relies on average frame rates. The absence of frame time variance data means stutter and consistency cannot be directly assessed, but the high average values across most configurations imply substantial performance margins that would typically absorb transient frame rate dips. The data indicates this system is more than sufficient for the game's requirements at standard gaming resolutions.
FAQ
Q: Can this PC run Barony at 4K resolution?
A: Yes, at 4K the system achieves playable frame rates on Low (110.1 FPS), Medium (82.5 FPS), and High (69.5 FPS) settings. The only unplayable configuration is 4K Ultra, which averages 49.8 FPS, below the 60 FPS playable threshold.
Q: What is the highest settings preset that maintains 60 FPS at 1440p?
A: At 2560x1440, all four presets clear 60 FPS. Ultra settings average 96 FPS, which is the most demanding playable configuration. High delivers 138.7 FPS, Medium 160.9 FPS, and Low 215.6 FPS.
Q: How does the CPU compare to similar processors in benchmark performance?
A: The Intel Core i7-14700F has an average benchmark score of 53620, placing it in the 91st percentile of all CPUs. Its nearest rival, the Intel Xeon 6505P, scores 53701, just 0.2% higher. The AMD Ryzen 9 7900X scores 53288, which is 0.6% lower than the i7-14700F.
Q: Is the RTX 4060 a high-performing GPU relative to other graphics cards?
A: The RTX 4060 sits in the 61st percentile of all GPUs with an average benchmark score of 17639. Its closest competitor, the AMD Radeon HD 7790, scores 17666, a negligible 0.2% difference. The AMD Radeon 780M scores 17588, just 0.3% lower.
Q: What frame rate can I expect at 1080p with Ultra settings?
A: At 1920x1080 with Ultra settings, the system averages 156 FPS. This is well above the 60 FPS playable threshold and provides enough headroom for high-refresh-rate monitors up to 144Hz.
Q: How large is the performance gap between Low and Ultra settings at 4K?
A: At 3840x2160, Low settings average 110.1 FPS while Ultra averages 49.8 FPS, a difference of 60.3 FPS. This represents approximately a 55% performance reduction from the lowest to the highest preset at this resolution.
CPU and GPU Roles
The benchmark data reveals which component dominates performance at each resolution by examining how frame rates scale with settings changes. At 1920x1080, the system produces frame rates from 156 FPS at Ultra to 340.8 FPS at Low, with a spread of 184.8 FPS. This wide variance indicates the GPU is the primary constraint, as changing graphical settings has a massive impact on output. The CPU, with its 20 cores and 28 threads, has more than enough headroom to feed the GPU at these frame rates.
At 2560x1440, the settings-based spread narrows somewhat: Low averages 215.6 FPS while Ultra averages 96 FPS, a difference of 119.6 FPS. The proportional reduction from Low to Ultra is approximately 55%, similar to the 1080p scaling, which suggests the GPU remains the limiting factor. The RTX 4060's 8 GB of GDDR6 memory and 272.0 GB/s bandwidth are sufficient for this resolution, as evidenced by the high frame rates even at Ultra settings.
The picture shifts at 3840x2160, where the GPU becomes significantly more stressed. Low settings produce 110.1 FPS, but Ultra drops to 49.8 FPS, a 60.3 FPS difference. The fact that even Low settings cannot reach the frame rates seen at 1080p Ultra (156 FPS) indicates that pixel throughput is now the dominant constraint. The RTX 4060's 15.11 TFLOPS of FP32 compute and 118.1 GPixel/s pixel rate are being pushed to their limits at 4K, while the CPU's performance headroom remains largely untapped.
The scaling between resolutions reinforces this conclusion. At Low settings, moving from 1080p to 1440p reduces frame rates from 340.8 to 215.6 FPS (37% reduction), and from 1440p to 4K further reduces to 110.1 FPS (49% reduction). This progressive decline with each resolution step is characteristic of GPU-bound scenarios. The CPU, which benchmarks in the 91st percentile of all processors with a multithread score of 41317 in Passmark, is never the bottleneck in this game.
The Verdict
This PC can absolutely run Barony, and it does so with significant performance to spare across most configurations. The verdict by resolution is clear: at 1920x1080, all four presets are playable, with Ultra averaging 156 FPS. At 2560x1440, again all presets clear 60 FPS, with Ultra achieving 96 FPS. The only limitation appears at 3840x2160, where High settings average 69.5 FPS and remain playable, but Ultra drops to 49.8 FPS, falling short of the 60 FPS threshold.
For users targeting the most demanding visual quality, the recommended configuration is 1440p Ultra, which delivers 96 FPS and represents the best balance of image quality and performance. At 4K, High settings at 69.5 FPS is the most demanding playable option, though users with 60Hz displays will find this perfectly smooth. The system's combination of a top-tier CPU and a mid-range GPU proves more than adequate for this roguelike title, which appears to scale well with hardware capabilities.
The data indicates that the RTX 4060, despite being in the 61st percentile of all GPUs, is well-matched to this game's requirements. Its 8 GB VRAM and Ada Lovelace architecture provide ample resources for Barony's visual effects. The i7-14700F, with its 91st percentile CPU ranking, ensures that even the highest frame rates are not CPU-limited. Together, they create a system that comfortably exceeds the 60 FPS target at every resolution except 4K Ultra.
Similar Performance Alternatives
For the CPU, the nearest rivals to the Intel Core i7-14700F offer nearly identical benchmark performance. The Intel Xeon 6505P scores 53701, just 0.2% higher, making it a statistically indistinguishable alternative. The AMD Ryzen 9 7900X scores 53288, which is 0.6% lower, and the AMD EPYC 7313P scores 53206, 0.8% lower. Any of these processors would deliver effectively the same frame rates in Barony, as the game does not appear to heavily stress CPU resources beyond what these chips easily provide.
On the GPU side, the NVIDIA GeForce RTX 4060's nearest rivals include the AMD Radeon HD 7790, which scores 17666 (0.2% higher), and the AMD Radeon 780M at 17588 (0.3% lower). The AMD Radeon Pro 560 scores 17551 (0.5% lower), and the AMD Radeon Pro 460 scores 17509 (0.7% lower). These GPUs would produce nearly identical frame rates in Barony, meaning users with any of these cards can expect similar performance characteristics, though the RTX 4060's 8 GB memory capacity and feature set may offer advantages in other titles.
The practical implication is that this system's performance profile is shared by a cluster of hardware combinations. Users upgrading from a Ryzen 9 7900X or downgrading to a Radeon HD 7790 would see minimal differences in Barony specifically. The benchmark deltas are all within 1% of each other, making these alternatives effectively interchangeable for this game's performance.
Best Settings per Resolution
At 1920x1080, the best settings are Ultra, which averages 156 FPS. This is the most demanding preset and it still provides over 2.5x the 60 FPS playable threshold. Users with 144Hz monitors will experience smooth frame rates, and even 240Hz displays would be partially utilized, though the frame rate does not quite reach that refresh rate.
At 2560x1440, Ultra settings also provide the best experience, averaging 96 FPS. This comfortably exceeds 60 FPS and supports high-refresh-rate gaming. The 96 FPS average leaves enough headroom for demanding scenes without dropping below the playable threshold, making this the sweet spot for visual quality and performance.
At 3840x2160, the best playable settings are High, which averages 69.5 FPS. This is the highest preset that maintains 60 FPS at 4K resolution. Ultra settings at 49.8 FPS fall below the playable threshold and should be avoided. Users prioritizing 4K gaming should stick with High settings to ensure consistent frame rates, while those willing to accept lower visual fidelity can use Medium at 82.5 FPS or Low at 110.1 FPS for additional headroom.