Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 34 | 39 | 53 |
| 1440p QHD | 46 | 64 | 75 | 100 |
| 1080p Full HD | 73 | 102 | 118 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
Barony is a lightweight, grid-based roguelike with a fully 3D first-person presentation, and the recorded data shows that this particular combination of an Intel Core i7-12700KF and an Intel Arc B390 produces a very wide performance spread depending on the resolution and quality preset. The database contains measured frame rates at three resolutions across four settings tiers, and the results indicate that the system is highly capable at standard 1080p, comfortably playable at 1440p, but falls short of the 60 FPS threshold at 4K. The following analysis breaks down the optimal settings, the balance of load between the CPU and GPU, and what other hardware in the database behaves similarly.
Best Settings per Resolution
At 1920x1080, the most demanding preset that maintains an average of at least 60 FPS is Ultra. The recorded average frame rate at this setting is 73 FPS, which clears the playable threshold by a solid margin. Lower presets are also viable, with High averaging 102 FPS, Medium averaging 118 FPS, and Low averaging 159 FPS, but Ultra is the highest quality tier that still delivers a fluid experience without dropping below the 60 FPS line in the averaged data.
Moving to 2560x1440, the best settings cap out at High. The measured average at High is 64 FPS, which is just above the 60 FPS threshold. The Medium preset averages 75 FPS and Low averages 100 FPS, but Ultra drops to 46 FPS, which is not playable. Therefore, High is the recommended ceiling for 1440p, as it offers the best visual quality while keeping the frame rate in a playable range.
At 3840x2160, no preset achieves an average of 60 FPS. The highest recorded average is 53 FPS at Low, followed by 39 FPS at Medium, 34 FPS at High, and 24 FPS at Ultra. Since none of these clear the playable threshold, the database lists no playable settings for 4K. The system cannot sustain a smooth experience at this resolution, and users would need to lower the resolution or accept a sub-60 FPS experience.
CPU and GPU Roles
The data reveals a clear shift in component importance as resolution increases. At 1920x1080, the frame rates are exceptionally high across all presets, with Low hitting 159 FPS and Ultra hitting 73 FPS. The gap between Low and Ultra is 86 FPS, which suggests that the GPU is the limiting factor at this resolution, but the CPU is not holding the system back. The Core i7-12700KF, with its 12 cores and 20 threads, provides ample headroom, as evidenced by the high minimum frame rates at Medium (101 FPS at 1080p). The GPU, an Intel Arc B390, is clearly capable of pushing high frame rates at this resolution, and the CPU does not appear to bottleneck.
At 2560x1440, the frame rates drop significantly compared to 1080p. Low goes from 159 FPS to 100 FPS, a 59 FPS reduction, and High goes from 102 FPS to 64 FPS, a 38 FPS reduction. This scaling indicates that the GPU is becoming the primary constraint, as the increased pixel count demands more from the rendering hardware. The CPU's role diminishes, as the frame rates are no longer in the range where a faster processor would yield significant gains. The Medium preset shows a minimum of 64 FPS and a maximum of 86 FPS at 1440p, which is a tighter range compared to 1080p, further suggesting that the GPU is setting the pace.
At 3840x2160, the GPU is overwhelmingly the dominant factor. The frame rates across all presets are low, with Low averaging 53 FPS and Ultra averaging 24 FPS. The scaling from 1440p Low (100 FPS) to 4K Low (53 FPS) shows a nearly 50% reduction, which is a typical sign of a GPU-bound scenario. The CPU's performance is largely irrelevant at this resolution, as the Arc B390 is simply not powerful enough to maintain high frame rates at 4K. The data indicates that for this game, the GPU is the limiting component at all resolutions above 1080p, while the CPU is more than sufficient for the workload.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core i7-12700KF sits in a tight performance cluster. The Intel Core i7-13700T has an average benchmark score of 35403, which is 0.1% lower than the i7-12700KF's score of 35365. The Intel Core 5 213PE is 0.2% higher at 35428, and the Intel Core i5-13600T is 0.2% higher at 35305. The Intel Core i7-12700K is nearly identical, with a score of 35287, just 0.2% lower. In practical terms, all of these CPUs would deliver nearly indistinguishable frame rates in Barony, as the game is not heavily CPU-bound at the tested settings. Any of these processors paired with the same GPU would produce similar results, with differences of less than 1% in synthetic benchmarks translating to negligible FPS changes in actual gameplay.
For the GPU, the Intel Arc B390 is at the very bottom of the database's performance ranking, with a percentile of 9 among all GPUs. Its nearest rivals are all much older NVIDIA parts. The NVIDIA GeForce GT 520MX has an average score of 1463, which is 1.3% lower than the Arc B390's 1482. The NVIDIA GeForce 800M is 1.5% lower at 1460, the NVIDIA GeForce GT 625 OEM is 2.5% lower at 1446, and the NVIDIA GeForce GT 710 is 2.7% lower at 1443. These deltas are small, meaning that a system with any of these GPUs would perform very similarly in Barony. The Arc B390 is only marginally faster than these decade-old parts, which explains its limited ability to handle higher resolutions. Users with any of these GPUs should expect the same playability profile: fine at 1080p, playable at 1440p on medium or high settings, and not viable at 4K.
The Verdict
Can this PC run Barony? The answer depends on the resolution. At 1920x1080, the system clears the 60 FPS threshold on all four presets, including Ultra with an average of 73 FPS. This is a fully playable experience, and the data shows that the system has headroom even at the highest settings. At 2560x1440, the system is playable on High, Medium, and Low, with High averaging 64 FPS and Medium averaging 75 FPS. Ultra is not playable, as it drops to 46 FPS. For 1440p users, High is the recommended setting, as it provides a good balance of visual quality and performance.
At 3840x2160, the system fails to reach 60 FPS on any preset. The best result is 53 FPS at Low, which is below the playable threshold. The verdict from the database is clear: 4K is not a viable option for this combination. The GPU's low performance percentile, combined with its system-shared memory and low pixel rate, makes it unsuitable for 4K gaming in this title. In summary, the system is a capable 1080p machine and a decent 1440p machine, but it is not a 4K gaming system.
Measured FPS Breakdown
At 1920x1080, the full set of measurements shows a wide range of performance. At Low, the average is 159 FPS. At Medium, the average is 118 FPS, with a minimum of 101 FPS and a maximum of 136 FPS. At High, the average is 102 FPS. At Ultra, the average is 73 FPS. The minimum frame rate at Medium is notable, as it stays above 100 FPS, indicating that the system rarely stutters at 1080p.
At 2560x1440, the averages are lower. Low averages 100 FPS. Medium averages 75 FPS, with a minimum of 64 FPS and a maximum of 86 FPS. High averages 64 FPS. Ultra averages 46 FPS. The Medium preset shows a tighter frame time variance compared to 1080p, with the minimum and maximum closer together, which suggests that the GPU is working harder to maintain the frame rate.
At 3840x2160, the performance is consistently low. Low averages 53 FPS. Medium averages 39 FPS, with a minimum of 33 FPS and a maximum of 45 FPS. High averages 34 FPS. Ultra averages 24 FPS. The minimum of 33 FPS at Medium shows that the system can dip below 30 FPS, which would be noticeable as stuttering. The data shows a clear linear decline in performance as resolution increases, with the GPU being the limiting factor at 4K.
How This Combo Ranks
In the database, this specific combination of the Intel Core i7-12700KF and Intel Arc B390 ranks 3300 out of 3717 tested combos for Barony. This places it in the bottom 11% of all systems tested for this game. The low ranking is primarily driven by the GPU, which has a percentile of 9 among all GPUs, meaning it is slower than 91% of the graphics cards in the database. The CPU, on the other hand, has a percentile of 85, indicating it is faster than most processors. The mismatch between the high-end CPU and the low-end GPU results in a system that is severely GPU-limited, particularly at higher resolutions.
The ranking reflects the system's overall capability in Barony. While it performs admirably at 1080p, the low GPU performance drags the combo down in the overall standings. The data shows that the CPU is not the bottleneck, as the frame rates at 1080p are high, but the GPU's inability to handle 4K prevents the system from achieving a higher rank. For users considering this combo, the ranking serves as a warning that the GPU is the weak link, and any upgrade to a more powerful graphics card would significantly improve the system's standing in the database.