Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 102 | 146 | 167 | 230 |
| 1440p QHD | 202 | 278 | 322 | 433 |
| 1080p Full HD | 316 | 438 | 514 | 641 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
Can Intel Core i3-1210F and NVIDIA GeForce RTX 5090 run Barony? The short answer is yes, with massive headroom at every resolution. Measured data shows this combination delivers playable frame rates across all tested settings, with the RTX 5090 shouldering most of the rendering load while the quad-core CPU keeps pace. The benchmark results paint a picture of a system that is thoroughly GPU-bound at higher resolutions, yet still achieves triple-digit averages even at 4K Ultra.
Best Settings per Resolution
At 1920x1080, the most demanding preset—Ultra—still produces an average of 316 FPS. The data shows no need to drop below Ultra here, as even the heaviest settings clear the 60 FPS threshold by more than five times. Low settings push that average to 641.2 FPS, but the Ultra preset remains the clear choice for image quality without sacrificing fluidity.
Moving to 2560x1440, the Ultra preset averages 202.2 FPS. This is still far beyond the playability threshold, making Ultra the recommended setting at this resolution. The scaling from 1080p Ultra to 1440p Ultra shows a 36% reduction in average frame rate, from 316 to 202.2 FPS, yet the result remains exceptionally smooth.
At 3840x2160, Ultra drops to 102.3 FPS on average. While this is the lowest result in the dataset, it still comfortably exceeds 60 FPS. The verdict data confirms Ultra as the best playable setting at 4K, with every preset from Low to Ultra listed as playable. High settings at this resolution yield 145.7 FPS, but the 102.3 FPS average of Ultra is the most demanding option that stays above the playability bar.
Across all three resolutions, the pattern is consistent: this combo can run Barony at maximum quality and still deliver frame rates that are 70% to 426% above the 60 FPS floor.
CPU and GPU Roles
The data reveals a system where the GPU becomes the dominant factor as resolution climbs, but the CPU still matters for pushing extreme frame rates at lower resolutions. At 1920x1080, the gap between Low and Ultra settings is massive—641.2 FPS versus 316 FPS—indicating that the RTX 5090 has ample headroom and the CPU is not fully limiting performance. The i3-12100F's 8 threads and 12 MB of L3 cache handle the game's logic without becoming a bottleneck, as evidenced by the 641.2 FPS Low preset result.
At 2560x1440, the same relative pattern holds: Low averages 432.7 FPS while Ultra manages 202.2 FPS. The reduction from 1080p Low to 1440p Low is 33%, while the reduction from 1080p Ultra to 1440p Ultra is 36%. This proportional scaling suggests the GPU is now the primary constraint, as the CPU's workload remains similar while pixel count increases.
The clearest GPU-bound signal appears at 3840x2160. Low settings drop to 229.6 FPS, and Ultra falls to 102.3 FPS. Compared to 1440p, the 4K Ultra result is 49% lower. This steep drop-off aligns with the RTX 5090's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth being taxed by the 8.3 million pixel workload. Meanwhile, the CPU's role diminishes—the i3-12100F's single-thread score of 1674 in Cinebench R23 is more than sufficient for Barony's roguelike logic, so the GPU consistently becomes the limiting factor at higher resolutions.
The benchmark data also shows that settings scaling has a larger impact than resolution scaling at 1080p. Going from Low to Ultra at 1080p reduces performance by 51%, while going from 1080p to 1440p at Ultra reduces it by 36%. This implies that at 1080p, the CPU can still push enough frames to expose the GPU's limitations, but the gap narrows as resolution increases.
Measured FPS Breakdown
1920x1080:
- Low: 641.2 FPS average
- Medium: 514 FPS average
- High: 437.8 FPS average
- Ultra: 316 FPS average
The 1080p results show a clear step-down curve. Medium sits 19.8% below Low, High drops 14.8% from Medium, and Ultra falls 27.8% from High. The 641.2 FPS Low result is the highest recorded in the entire dataset, indicating that the CPU is able to feed the GPU enough data to saturate it even at this modest resolution.
2560x1440:
- Low: 432.7 FPS average
- Medium: 321.9 FPS average
- High: 277.9 FPS average
- Ultra: 202.2 FPS average
At 1440p, the Low preset still exceeds 400 FPS, but the gap between Medium and High narrows to 13.7%, compared to 14.8% at 1080p. Ultra at 1440p (202.2 FPS) is nearly identical to the 1080p Medium result (514 FPS) in terms of raw performance headroom—both are far above the 60 FPS threshold.
3840x2160:
- Low: 229.6 FPS average
- Medium: 167.2 FPS average
- High: 145.7 FPS average
- Ultra: 102.3 FPS average
The 4K results show the most dramatic scaling. Low to Medium drops 27.2%, Medium to High drops 12.8%, and High to Ultra drops 29.8%. The Ultra result of 102.3 FPS is the only figure in the entire dataset that falls below 200 FPS, but it remains 70.5% above the playability threshold.
No min or max FPS values were recorded, so the analysis relies solely on average frame rates. All 12 measured data points exceed 60 FPS, with the lowest being 102.3 FPS at 4K Ultra.
FAQ
Q: Can this PC run Barony at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 Ultra is 102.3, which is well above the 60 FPS playability threshold. The verdict data lists Ultra as the best playable setting at this resolution.
Q: What is the highest frame rate this combo achieves?
A: The highest measured average is 641.2 FPS at 1920x1080 with Low settings. Even at 4K Low, the average remains 229.6 FPS, showing massive headroom across the board.
Q: Is the CPU or GPU the limiting factor for this game?
A: The data indicates the GPU becomes the primary constraint as resolution increases. At 1080p, the difference between Low and Ultra is 325.2 FPS, while at 4K that difference shrinks to 127.3 FPS. This scaling suggests the RTX 5090's workload grows faster than the CPU's, making the GPU the bottleneck at higher resolutions.
Q: How does the i3-12100F compare to similar CPUs in synthetic benchmarks?
A: The i3-12100F has an average benchmark score of 13494, placing it at the 68th percentile among all CPUs. Its nearest rival, the Intel Core 3 N355, scores 13492 with a 0% delta, while the Core i5-9500 scores 13452 with a 0.3% delta.
Q: Does the RTX 5090's performance rank high among GPUs?
A: The RTX 5090 sits at the 92nd percentile among all GPUs with an average benchmark score of 79842. Its nearest rival, the Tesla P100 PCIe 16 GB, scores 79605 (0.3% delta), while the Radeon RX 6850M XT scores 78940 (1.1% delta).
Q: What frame rate can I expect at 1440p with High settings?
A: The measured average is 277.9 FPS at 2560x1440 High. This is 363% above the 60 FPS threshold, making it an excellent choice for high-refresh-rate monitors.
How This Combo Ranks
The Intel Core i3-12100F and NVIDIA GeForce RTX 5090 combination ranks 75th out of 3717 tested combos for Barony. This places it in the top 2% of all configurations in the database. The rank reflects the GPU's dominant role in this game—the RTX 5090's 92nd percentile standing among all GPUs drives the combo's high placement, while the CPU's 68th percentile rank is sufficient for the game's requirements.
The i3-12100F's nearest CPU rivals show minimal performance deltas: the Core 3 N355 matches it at 0%, the Core i5-9500 is 0.3% faster, and the Core 5 120UL is 0.7% slower. On the GPU side, the RTX 5090's nearest rivals are the Tesla P100 PCIe 16 GB (0.3% slower), the Tesla P100 PCIe 12 GB (0.6% slower), and the Radeon RX 6850M XT (1.1% slower). These tight deltas suggest that swapping the CPU for a slightly faster model would not meaningfully change the combo's rank, as the GPU remains the performance ceiling in Barony.
Given that the combo achieves a 75th rank out of 3717, the data shows this is a high-end configuration for this specific game. The rank would likely be lower for more CPU-intensive titles, but for Barony's roguelike engine, the GPU-centric design pays off.
The Verdict
The verdict data is unambiguous: this PC can run Barony at every resolution and preset combination tested. At 1920x1080, the Ultra preset averages 316 FPS, making it the best playable setting. At 2560x1440, Ultra averages 202.2 FPS, again the top choice. At 3840x2160, Ultra averages 102.3 FPS, which still clears the 60 FPS threshold by 70.5%.
All four settings presets—Low, Medium, High, and Ultra—are listed as playable at each resolution. The lowest recorded average across all 12 data points is 102.3 FPS at 4K Ultra, meaning there is no configuration in the dataset that drops below the playability floor. This system does not merely run Barony; it overwhelms it with performance headroom. Even the most demanding scenario, 4K Ultra, leaves enough frame rate margin for a 100 Hz display, while 1080p Low reaches 641.2 FPS for competitive or high-refresh-rate play.
For users with a 60 Hz monitor, every setting at every resolution delivers more than double the required frame rate. For 144 Hz displays, 4K Ultra is the only setting that falls below 144 FPS, and it still manages 102.3 FPS. The i3-12100F proves adequate for this game's CPU demands, and the RTX 5090's massive compute resources ensure that Barony runs flawlessly at maximum quality across all tested resolutions.