Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
507 FPS
Ultra 1080p Measured
230 FPS

1440p (2K / QHD)

Low 1440p Measured
323 FPS
Ultra 1440p Measured
147 FPS

4K (Ultra HD)

Low 4K Measured
166 FPS
Ultra 4K Measured
74 FPS
3.1ms Frame Time
5ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 13,494
Graphics Card
Required 27,048
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 74 107 123 166
1440p QHD 147 204 238 323
1080p Full HD 230 324 375 507

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 324
1920x1080 Low 507
1920x1080 Medium 375
1920x1080 Ultra 230
2560x1440 High 204
2560x1440 Low 323
2560x1440 Medium 238
2560x1440 Ultra 147
3840x2160 High 107
3840x2160 Low 166
3840x2160 Medium 123
3840x2160 Ultra 74

Performance Analysis: Barony on Your System

The Intel Core i3-12100F and NVIDIA GeForce RTX 5070 form an asymmetric pairing in the context of Barony, a roguelike title where the data indicates extreme frame rates across all tested configurations. The CPU, a 4-core/8-thread Alder Lake part, posts an average benchmark score of 13494, placing it at the 68th percentile of all CPUs. Its nearest rivals in aggregate performance are the Intel Core 3 N355 (13492, 0% delta), the Intel Core i5-9500 (13452, 0.3% slower), the Intel Core 5 120UL (13594, 0.7% faster), and the Intel Core i7-1250U (13351, 1.1% slower). These alternatives would deliver nearly identical CPU-bound behavior in Barony, meaning any of them would likely sustain the high frame rates seen here without becoming a bottleneck at typical gaming resolutions.

On the graphics side, the RTX 5070, built on the Blackwell 2.0 architecture with 6144 shading units and 12 GB of GDDR7 memory on a 192-bit bus, achieves an average benchmark score of 40377, ranking at the 82nd percentile of all GPUs. Its nearest rivals, based on average score, are the AMD Radeon Pro 580 (40318, 0.1% slower), the AMD Radeon Pro WX 7100 (40063, 0.8% slower), the AMD Radeon Pro 5300 (40870, 1.2% faster), and the NVIDIA RTX A500 Mobile (39568, 2% slower). For Barony, a game that is not graphically demanding, these rival GPUs would produce nearly identical frame rates, as the workload is likely far below the saturation point of any of these cards. The data suggests that the GPU is massively overprovisioned for this title, and even the closest performance equivalents would be more than sufficient.

Similar Performance Alternatives

For users seeking hardware that behaves like this specific CPU-GPU combination in Barony, the benchmark data points to several direct substitutes. On the CPU side, the Intel Core i5-9500, with a delta of just 0.3% in average score, is the closest match. In practice, this means that swapping the i3-12100F for the i5-9500 would yield virtually indistinguishable frame rates in this game, as the title's engine is unlikely to stress either processor beyond its 4-core or 6-core limits. Similarly, the Intel Core 3 N355 and Intel Core 7-1250U, with deltas of 0% and 1.1% respectively, fall within the margin of error for synthetic benchmarks, suggesting that any performance difference in Barony would be imperceptible.

On the GPU side, the AMD Radeon Pro 580 and AMD Radeon Pro WX 7100 are the nearest rivals, with deltas of 0.1% and 0.8% respectively. Given that the measured FPS in Barony exceeds 70 at 4K Ultra settings, these professional-grade cards would almost certainly produce the same playable experience. The NVIDIA RTX A500 Mobile, despite being a laptop part, is only 2% slower in aggregate benchmarks, and its lower power envelope would not hinder it in this specific title. The data implies that the RTX 5070 is operating well within its comfort zone here; the game's rendering load is so light that the GPU's raw compute headroom is never truly tested. Therefore, any of these rival GPUs would behave similarly, delivering frame rates that are either at or far above the 60 FPS threshold.

CPU and GPU Roles

The measured FPS data reveals a clear pattern: the GPU is the dominant component in Barony, but only in a relative sense, as both components are vastly overpowered for this title. At 1920x1080, the difference between Low and Ultra settings is substantial, with the average FPS dropping from 506.5 to 229.8. This 54% reduction in frame rate when moving to Ultra settings indicates that the GPU is doing significant work, though the absolute numbers remain extraordinarily high. At 3840x2160, the scaling is even more pronounced: Low settings produce 166.2 FPS, while Ultra drops to 74 FPS, a 55% decrease. This consistent scaling across resolutions suggests that the GPU's shading units and memory bandwidth are the primary factors determining performance, as the CPU's role in physics and game logic is likely minor for a roguelike.

However, the CPU's influence becomes apparent when examining the frame rates at lower resolutions. At 1920x1080 Low, the system achieves 506.5 FPS, which is a figure that could potentially be limited by the CPU's single-thread performance in certain scenarios. The i3-12100F's single-thread score in Cinebench R23 is 1674, and its 3DMark single-thread score is 893. These numbers are respectable for a quad-core part, but the sheer volume of frames being rendered at 1080p Low means that the CPU must process draw calls and game state updates at an extremely high rate. The fact that the frame rate drops by 37% when moving from 1080p Low to 1440p Low (from 506.5 to 322.8) shows that the GPU is still the limiter, as the resolution increase places more burden on the render pipeline. Yet, the 4K Low result of 166.2 FPS, which is a 49% drop from 1440p Low, confirms that the GPU's fill rate and memory bandwidth are the binding constraints at higher resolutions. In summary, the GPU is the primary performance driver across all settings, while the CPU provides sufficient headroom to avoid bottlenecking, even at the highest frame rates observed.

Measured FPS Breakdown

The benchmark results provide a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the system delivers exceptional frame rates: Low settings average 506.5 FPS, Medium settings average 375.1 FPS, High settings average 324.3 FPS, and Ultra settings average 229.8 FPS. These numbers indicate that the RTX 5070 is barely taxed, and even the most demanding preset at this resolution leaves massive performance headroom. The gap between Low and Ultra is 276.7 FPS, showing that the graphics settings have a measurable impact, but the lowest result is still nearly four times the 60 FPS playability threshold.

Moving to 2560x1440, the frame rates remain remarkably high. Low settings yield 322.8 FPS, Medium settings produce 238 FPS, High settings achieve 203.7 FPS, and Ultra settings still manage 147.4 FPS. The scaling from 1080p to 1440p shows a consistent reduction of roughly 36-38% across all presets, which aligns with the increased pixel count. At 3840x2160, the performance drops further but remains impressive: Low settings run at 166.2 FPS, Medium at 123.4 FPS, High at 107 FPS, and Ultra at 74 FPS. The 4K Ultra result is the only configuration that approaches the 60 FPS threshold, but it still clears it by a comfortable 14 FPS margin. The data shows a clear monotonic relationship between resolution, settings, and frame rate, with no anomalies or unexpected bottlenecks.

How This Combo Ranks

In the broader context of all tested combinations, this specific pairing of the Intel Core i3-12100F and NVIDIA GeForce RTX 5070 ranks 731st out of 3717 total combos for Barony. This places the system in the top 20% of all configurations tested, which is a strong showing given that the CPU is a budget-oriented quad-core part. The high ranking is attributable almost entirely to the GPU, as the RTX 5070's average benchmark score of 40377 places it in the 82nd percentile of all GPUs. The CPU's 68th percentile ranking is lower, but it does not drag down the overall combo ranking because Barony is not a CPU-intensive title. The rank of 731 suggests that there are many systems with more powerful CPUs that score higher, but the data indicates that the GPU is the deciding factor for this game. In fact, the combo outperforms systems with much stronger processors but weaker graphics cards, confirming that the RTX 5070's raw rendering power is the key to achieving such high frame rates. The 3717 total combos represent a wide range of hardware, and this pairing's position in the upper quintile reflects the GPU's capability in this specific workload.

The Verdict

The benchmark data unequivocally shows that this PC can run Barony with exceptional performance at every resolution and preset tested. According to the verdict by resolution, all settings are playable at all three resolutions. At 3840x2160, the playable settings include Low, Medium, High, and Ultra, with the best settings being Ultra at an average of 74 FPS. This clears the 60 FPS threshold with a 14 FPS margin, proving that the system can handle the game at its highest visual quality in 4K. At 2560x1440, all settings are also playable, with Ultra averaging 147.4 FPS, which is more than double the threshold. At 1920x1080, the system reaches extraordinary heights, with Ultra averaging 229.8 FPS and Low exceeding 500 FPS. The verdict is clear: this combination delivers a flawless experience in Barony, with no configuration falling below the 60 FPS playability threshold. The lowest recorded average is 74 FPS at 4K Ultra, which is still comfortably above the target.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is Ultra, according to the measured data. At 1920x1080, Ultra settings run at an average of 229.8 FPS, which is nearly four times the threshold. This is the recommended configuration, as it provides the best visual quality without any performance compromise. At 2560x1440, Ultra settings average 147.4 FPS, again far exceeding the 60 FPS target. The high frame rate at this resolution allows for smooth gameplay with all graphical features enabled. At 3840x2160, Ultra settings average 74 FPS, which is above the 60 FPS threshold but leaves less headroom than the lower resolutions. Despite this, the data confirms that 4K Ultra is fully playable. The fact that the most demanding preset is playable at every resolution indicates that the system has significant performance reserves. Users can confidently enable the highest settings without worrying about frame rate drops, as the minimum observed average is still 14 FPS above the threshold. This makes the RTX 5070 and i3-12100F combination a top-tier choice for Barony, delivering maximum visual fidelity at all times.