Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
600 FPS
Ultra 1080p Measured
274 FPS

1440p (2K / QHD)

Low 1440p Measured
379 FPS
Ultra 1440p Measured
173 FPS

4K (Ultra HD)

Low 4K Measured
198 FPS
Ultra 4K Measured
91 FPS
2.6ms Frame Time
4ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 13,494
Graphics Card
Required 27,048
Your GPU 54,247

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 91 126 147 198
1440p QHD 173 242 281 379
1080p Full HD 274 383 446 600

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 383
1920x1080 Low 600
1920x1080 Medium 446
1920x1080 Ultra 274
2560x1440 High 242
2560x1440 Low 379
2560x1440 Medium 281
2560x1440 Ultra 173
3840x2160 High 126
3840x2160 Low 198
3840x2160 Medium 147
3840x2160 Ultra 91

Performance Analysis: Barony on Your System

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 4080 is an unconventional mix: a 4-core/8-thread Alder Lake desktop CPU with a 3.30 GHz base and 4.30 GHz boost, alongside a top-tier Ada Lovelace GPU with 16 GB of GDDR6X memory and 9,728 shading units. In Barony, a roguelike released in 2015, this combination delivers exceptionally high frame rates across all tested resolutions and presets. Measured data shows that even at 3840x2160 with Ultra settings, the average FPS is 91, comfortably above the 60 FPS playability threshold. The CPU has a launch MSRP of $97, and the GPU has a launch MSRP of $1,199.

Similar Performance Alternatives

The Intel Core i3-12100F posts an average benchmark score of 13,494, placing it in the 68th percentile of all CPUs. Its nearest rivals, based on average score, are the Intel Core 3 N355 (13,492, 0% delta), the Intel Core i5-9500 (13,452, +0.3%), the Intel Core 5 120UL (13,594, -0.7%), and the Intel Core i7-1250U (13,351, +1.1%). These deltaPct values are all within roughly one percent, meaning any of these processors would produce nearly identical frame rates in Barony. The game’s CPU load is modest, as evidenced by the i3-12100F’s single-thread scores (893 in 3dmark single-thread, 1,674 in Cinebench R23 single-core) and its multi-thread capability (4,051 in 3dmark 16-threads, 11,860 in Cinebench R23 multi-core). Swapping to any of these rivals would not meaningfully change the experience, as the bottleneck in this title is far more likely to be the GPU at higher resolutions.

On the GPU side, the NVIDIA GeForce RTX 4080 achieves an average benchmark score of 54,247, sitting in the 86th percentile of all GPUs. Its closest competitors are the RTX 4080 SUPER (54,209, +0.1%), AMD Radeon Pro W5700X (54,828, -1.1%), AMD Radeon RX 6750 GRE 12 GB (55,698, -2.6%), and AMD Radeon 8060S (55,757, -2.7%). The RTX 4080 is effectively tied with the 4080 SUPER, and the other three are within 3% in either direction. In a game as undemanding as Barony, all these GPUs would deliver frame rates in the same high range; the 4080’s 3DMark Steel Nomad DX12 score of 6,567 and PassMark G3D score of 34,457 confirm its headroom. Users considering an upgrade or alternative from the 4080 would see no practical difference in this title, as the game’s rendering workload is far below the GPU’s capacity.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU share the workload across resolutions and presets. At 1920x1080 with Low settings, the average FPS is 600 — a figure that suggests the CPU is capable of feeding the GPU at a rate far beyond typical display refresh rates. Moving to 2560x1440 Low drops the average to 379, and at 3840x2160 Low it falls to 198. This scaling pattern — roughly a 3x reduction from 1080p to 4K at the same preset — is characteristic of GPU-bound rendering. The CPU’s contribution is largely resolution-independent; its role is to process game logic, physics, and draw calls. Given the i3-12100F’s 4 cores and 8 threads, with a base clock of 3.30 GHz and boost of 4.30 GHz, its single-thread performance is sufficient to avoid stalling the RTX 4080 in this title. The 3dmark single-thread score of 893 and PassMark single-thread score of 3,444 indicate strong per-core capability, which is critical for a roguelike that likely relies on a single main thread.

At 1080p, the GPU is heavily underutilized; the 600 FPS Low result is far beyond any monitor’s refresh rate, and even Ultra at 1080p averages 274 FPS. This indicates that the CPU is not a limiting factor at this resolution. As resolution climbs to 1440p and 4K, the GPU’s rendering load increases proportionally, and the frame rates scale accordingly. For example, at Medium settings, the average FPS drops from 446 at 1080p to 281 at 1440p and 147 at 4K. The minimum FPS recorded for Medium settings — 379 at 1080p, 239 at 1440p, and 125 at 4K — all remain well above 60 FPS, confirming that neither component causes a noticeable hitch. The data shows that the GPU becomes the primary determinant of performance at higher resolutions, while the CPU’s headroom is ample even at 4K Ultra, where the average is 91 FPS.

How This Combo Ranks

The combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 4080 ranks 244th out of 3,717 tested combos in Barony. This places it in the upper echelon of all configurations, driven overwhelmingly by the GPU’s high percentile standing (86th among all GPUs) and the CPU’s adequate 68th percentile. While the CPU is not a top-tier part, the game’s low system requirements allow the GPU to dominate frame rate output. The rank reflects that only a small number of combos — those with even more powerful GPUs or CPUs — would produce higher average FPS. Given that the RTX 4080 is end-of-life and the i3-12100F is an entry-level desktop processor, this ranking is notably high, but it makes sense in the context of a 2015 roguelike that is not graphically intensive. The measured data is real, not simulated, and the combo’s position at 244/3,717 means it outperforms the vast majority of systems tested for this game.

The Verdict

This PC can run Barony at 60 FPS or higher at every resolution and preset tested. The verdict by resolution is unambiguous: at 3840x2160, all four presets — Low, Medium, High, and Ultra — are playable, with Ultra delivering an average of 91 FPS. At 2560x1440, Ultra averages 173 FPS, and at 1920x1080, Ultra averages 274 FPS. The playable threshold is 60 FPS, and every measured average exceeds it by a wide margin. The only minimum FPS values recorded are for Medium settings: 125 FPS at 4K, 239 FPS at 1440p, and 379 FPS at 1080p, all far above the threshold. Consequently, users can enable Ultra settings at any resolution without concern for frame rate drops. The combination of a modest CPU and a flagship GPU proves more than capable for this title, and the data confirms that no settings need to be compromised.

FAQ

Q: Can this combo run Barony at 4K Ultra?

A: Yes, the measured average FPS at 3840x2160 Ultra is 91, which is above the 60 FPS threshold.

Q: What is the best setting for 1440p?

A: Ultra is the best setting, with an average of 173 FPS at 2560x1440.

Q: How does the RTX 4080 compare to its nearest rival, the RTX 4080 SUPER?

A: The RTX 4080 has an average benchmark score of 54,247, while the RTX 4080 SUPER scores 54,209, a delta of 0.1% — essentially identical performance.

Q: Is the Intel Core i3-12100F a bottleneck for the RTX 4080 in Barony?

A: The data suggests no, as the combo achieves 600 FPS at 1080p Low, indicating the CPU can feed the GPU without limiting frame rates.

Q: What is the combo’s rank among all tested systems?

A: It ranks 244th out of 3,717 combos, placing it in the top tier of tested configurations.

Q: Are there any settings that drop below 60 FPS?

A: No, all measured averages across all resolutions and presets exceed 60 FPS, with the lowest average being 91 FPS at 4K Ultra.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 274 FPS. At 2560x1440, Ultra averages 173 FPS. At 3840x2160, Ultra averages 91 FPS. In every case, Ultra is the highest available preset and it remains above 60 FPS, so there is no need to lower settings. The measured data shows that this combination delivers playable performance at maximum quality across all tested resolutions, making it a top-tier option for Barony.