Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 56 | 79 | 97 | 130 |
| 1440p QHD | 110 | 159 | 181 | 243 |
| 1080p Full HD | 176 | 250 | 287 | 385 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3070 delivers a decisive performance profile in Barony, a roguelike title that proves far more forgiving to modern hardware than its genre peers might suggest. Measured data across three resolutions and four presets shows this combination rarely struggles, with the only sub-60 FPS result appearing at the absolute ceiling of 4K Ultra. The benchmark results indicate a system that comfortably handles high-refresh-rate 1080p and 1440p gaming, while 4K remains viable at High settings.
Measured FPS Breakdown
At 1920x1080, the combo produces exceptional frame rates across all settings. The Low preset yields an average of 385.3 FPS, making it the fastest configuration tested. Moving up the quality ladder, Medium achieves 287.3 FPS, while High still delivers a robust 249.7 FPS. The most demanding Ultra preset at this resolution maintains an average of 176.2 FPS. These numbers suggest that the CPU-GPU pairing is nowhere near its limits at 1080p; even the heaviest settings leave enormous headroom for high-refresh-rate monitors.
Stepping up to 2560x1440, the performance remains stellar but shows the expected scaling penalty. Low settings produce 243.2 FPS, which is roughly 63% of the 1080p Low result. Medium follows at 180.5 FPS, High at 158.9 FPS, and Ultra still comfortably clears triple digits with 109.9 FPS. The gap between Low and Ultra at this resolution is about 133 FPS, indicating that the GPU is beginning to feel the load but is far from overwhelmed. Every preset here stays well above the 60 FPS playability threshold.
At 3840x2160, the picture changes more dramatically. Low settings still deliver a very playable 129.9 FPS, and Medium drops to 97.3 FPS. High settings manage 79.1 FPS, which remains smooth for most users. The Ultra preset, however, falls to 55.5 FPS, narrowly missing the 60 FPS target. This is the only configuration in the entire data set that fails the playability threshold. The scaling from 1440p to 4K is steep: High settings lose roughly 80 FPS, and Ultra loses about 54 FPS, demonstrating that the RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth face a genuine challenge at 4K Ultra.
CPU and GPU Roles
The data reveals a clear division of labor between the i3-12100F and the RTX 3070. At 1080p, the frame rates are so high that the CPU's single-thread performance—a 3DMark single-thread score of 893 and a Geekbench single-core score of 1932—becomes the likely limiting factor. With 385.3 FPS at Low settings, the game is effectively CPU-bound; the GPU has ample headroom, as evidenced by the relatively small drop to 287.3 FPS at Medium and 249.7 FPS at High. The 4-core, 8-thread processor with a 4.30 GHz boost clock appears sufficient to feed the RTX 3070 at these extreme rates, but the scaling suggests that a faster CPU might push even higher.
As resolution increases to 1440p, the GPU's role grows. The frame rate drop from 1080p Low to 1440p Low is about 142 FPS, a 37% reduction that is more pronounced than the pixel-count increase alone would predict. This indicates the RTX 3070's 20.31 TFLOPS of FP32 performance is becoming the bottleneck. At 4K, the GPU is firmly in charge: the difference between Low and Ultra settings at 3840x2160 is 74.4 FPS, whereas at 1080p that same spread is 209.1 FPS. The compression of the settings range at higher resolutions is a classic sign of GPU saturation. The RTX 3070's 8 GB VRAM and 256-bit memory bus are adequate for most presets, but the Ultra 4K result of 55.5 FPS shows the card running out of headroom.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 176.2 FPS. This is a trivial decision—there is no reason to lower settings at this resolution, as even the heaviest configuration provides nearly triple the playability threshold.
At 2560x1440, Ultra again is the best choice, delivering 109.9 FPS. The gap between Ultra and High at this resolution is about 49 FPS, so users seeking maximum visual fidelity can do so without sacrificing smoothness. The data shows that all four presets clear 60 FPS here, making the decision purely about visual preference versus frame-rate headroom.
The 3840x2160 resolution requires more careful consideration. High settings are the most demanding playable option, averaging 79.1 FPS. Medium runs at 97.3 FPS and Low at 129.9 FPS, but High offers the best balance of visual quality and performance. Ultra fails to reach 60 FPS at 55.5 FPS, so it is not recommended. Users who prioritize frame rate might prefer Medium or even Low, but High is the top tier that meets the threshold.
How This Combo Ranks
The combination of the i3-12100F and RTX 3070 ranks 1582nd out of 3717 tested combos for Barony, placing it in the upper half of all configurations. This percentile position, roughly the 57th percentile, is notable given the game's age and modest requirements. The rank reflects the CPU's relatively modest standing—it sits at the 68th percentile against all CPUs—but the GPU's 61st percentile ranking is sufficient to push the combo into a strong overall position.
The rank suggests that while this is not a top-tier setup for Barony, it outperforms a majority of tested systems. The game appears to scale well with both CPU and GPU resources, so the combo's mid-pack standing is a function of the CPU's 4-core limitation more than any GPU deficiency. The measured FPS data confirms this: the system produces frame rates that would embarrass many higher-ranked combos on paper, but the rank accounts for the full spectrum of hardware tested.
Similar Performance Alternatives
Looking at the CPU's nearest rivals, the i3-12100F's average benchmark score of 13494 is nearly identical to the Intel Core 3 N355, which scores 13492 with a 0% delta. The Intel Core i5-9500 comes in at 13452, just 0.3% slower, while the Intel Core 5 120UL scores 13594, or 0.7% faster. The Intel Core i7-1250U is 1.1% slower at 13351. These processors would behave almost identically in Barony, meaning a system built around any of them with the RTX 3070 would produce FPS numbers within a rounding error of the measured results. The i5-9500, despite being an older architecture, offers essentially the same performance headroom.
On the GPU side, the RTX 3070's average benchmark score of 17208 is closely matched by the AMD Radeon RX 7600 XT, which scores 17083 and is 0.7% slower. The NVIDIA GeForce GTX 690 scores 17037, just 1% behind, and the AMD Radeon HD 7970M is 1.1% slower at 17019. The NVIDIA Tesla K40c is 1.5% faster at 17468. For Barony, swapping the RTX 3070 for any of these cards would yield nearly identical frame rates. The GTX 690, despite its age, is a particularly interesting comparison—it would match the RTX 3070's performance in this game, though it lacks modern features like ray tracing and DLSS.
The Verdict
This PC can absolutely run Barony, and it does so with remarkable ease. The verdict by resolution is unambiguous: at 1920x1080, all four presets—Low at 385.3 FPS, Medium at 287.3 FPS, High at 249.7 FPS, and Ultra at 176.2 FPS—far exceed the 60 FPS playability threshold. The best settings at this resolution are Ultra, with an average of 176.2 FPS. At 2560x1440, the situation is equally rosy: every preset clears 60 FPS, with Ultra averaging 109.9 FPS as the best playable option. The 3840x2160 resolution is the only area of concern, but even here, High settings deliver 79.1 FPS, Medium runs at 97.3 FPS, and Low hits 129.9 FPS. Only Ultra fails at 55.5 FPS.
In practical terms, this means the i3-12100F and RTX 3070 combination is overkill for 1080p and 1440p gaming in Barony, offering frame rates that exceed most monitors' refresh rates. For 4K users, the system is fully capable as long as the Ultra preset is avoided. The data shows that this game is exceptionally well-optimized for the hardware, with no surprises or bottleneck-induced stutters. The only recommendation is to skip 4K Ultra if a strict 60 FPS is required; everything else is smooth sailing. This is a versatile, high-performance setup for a game that rewards fast, fluid action.