Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

45%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
265 FPS
Ultra 1080p Measured
118 FPS

1440p (2K / QHD)

Low 1440p Measured
166 FPS
Ultra 1440p Measured
76 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
39 FPS
6.1ms Frame Time
9ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 13,494
Graphics Card
Required 27,048
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 53 67 85
1440p QHD 76 106 123 166
1080p Full HD 118 165 196 265

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 165
1920x1080 Low 265
1920x1080 Medium 196
1920x1080 Ultra 118
2560x1440 High 106
2560x1440 Low 166
2560x1440 Medium 123
2560x1440 Ultra 76
3840x2160 High 53
3840x2160 Low 85
3840x2160 Medium 67
3840x2160 Ultra 39

Performance Analysis: Barony on Your System

Measured FPS Breakdown

Barony is an undemanding title for this configuration, and the recorded frame rates confirm it. The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 2060 delivers a wide range of performance depending on resolution and quality preset. All measurements are average FPS values; the database does not report minimum or maximum frame times for this title.

At 1920x1080, the system is exceptionally fast. The Low preset averages 265 FPS, which is more than four times the 60 FPS playability threshold. Medium increases the load slightly, producing an average of 195.9 FPS. High drops to 164.6 FPS, while the Ultra preset still holds an average of 118.1 FPS. Even at the most demanding setting, the frame rate remains well above what any standard 60 Hz or 144 Hz display would require.

Moving to 2560x1440, the picture remains strong. Low averages 166 FPS, and Medium follows with 122.9 FPS. High is recorded at 105.5 FPS, and Ultra, the most demanding preset at this resolution, still manages 76.3 FPS. The scaling from 1080p to 1440p costs roughly 35% to 40% of the frame rate at each preset, but the absolute numbers remain playable across the board.

At 3840x2160, 4K resolution, the configuration starts to feel the pressure. Low averages 85 FPS, which is comfortable. Medium drops to 66.9 FPS, still above the 60 FPS threshold. High falls to 53.2 FPS, below playable, and Ultra bottoms out at 39.2 FPS. The gap between Medium and High at 4K is significant, indicating the GPU is becoming the limiting factor as pixel count rises.

CPU and GPU Roles

The benchmark data shows a clear shift in component dependency as resolution increases. At 1920x1080, the frame rates are so high that neither the CPU nor GPU is pushed to its limit. The i3-12100F, with its 4 cores and 8 threads, has ample headroom in this roguelike. The RTX 2060, with 1920 shading units and 6 GB of GDDR6 memory, is also not stressed. The 265 FPS Low result at 1080p suggests the game is lightly threaded and does not heavily tax the processor.

The scaling between presets at 1080p is telling. Moving from Low to Medium costs 69.1 FPS, from Medium to High costs 31.3 FPS, and from High to Ultra costs 46.5 FPS. This non-linear behavior indicates the GPU is doing more work as settings rise, but the CPU is still keeping pace. The i3-12100F's single-thread performance, evidenced by its Geekbench single-core score of 1932, is sufficient for this engine.

At 2560x1440, the GPU begins to take on a larger role. The frame rate drops from 166 FPS at Low to 76.3 FPS at Ultra, a reduction of 54%. The CPU is no longer the primary constraint; the RTX 2060's pixel throughput and memory bandwidth, rated at 336.0 GB/s, are now the deciding factors. The Turing architecture, with its 120 TMUs and 48 ROPs, handles the increased resolution load predictably.

At 3840x2160, the GPU is clearly the bottleneck. The jump from Medium at 66.9 FPS to High at 53.2 FPS is a 20.5% drop, and Ultra falls to 39.2 FPS. The RTX 2060's 6 GB frame buffer and 192-bit memory bus are adequate for 1080p and 1440p, but 4K with high settings exceeds what the card can sustain. The CPU's role diminishes further; the i3-12100F is effectively idle waiting for the GPU at this resolution.

Similar Performance Alternatives

The database places the Intel Core i3-12100F in the 68th percentile of all CPUs, with an average benchmark score of 13494. Its nearest rivals are remarkably close in aggregate performance. The Intel Core 3 N355 scores 13492, a 0% delta, meaning these two processors are functionally interchangeable in this game. The Intel Core i5-9500 scores 13452, just 0.3% lower. The Intel Core 5 120UL is 0.7% faster at 13594, while the Intel Core i7-1250U trails by 1.1% at 13351. For Barony, any of these CPUs would produce nearly identical frame rates when paired with the same GPU.

The NVIDIA GeForce RTX 2060 sits in the 58th percentile of all GPUs, with an average benchmark score of 15290. Its nearest rivals are also tightly clustered. The NVIDIA GeForce GTX 580 scores 15283, a 0% delta, which is surprising given the architectural differences between Turing and the older Fermi design. The AMD Radeon 680M scores 15270, just 0.1% lower. The NVIDIA GeForce RTX 3050 OEM is 0.6% behind at 15199, and the AMD Radeon RX 7600 is 0.8% behind at 15171. In practice, a system built with any of these GPUs would deliver the same playable experience at 1080p and 1440p, with the same 4K limitations at High and Ultra presets.

The practical takeaway is that this combination of CPU and GPU is well matched. The i3-12100F's rivals do not change the outcome, and the RTX 2060's rivals do not shift the verdict. A shopper looking at similar hardware should expect the same Barony performance profile.

FAQ

Q: Can this PC run Barony at 60 FPS on a 1080p monitor?

A: Yes. At 1920x1080, all four presets exceed 60 FPS. Low averages 265 FPS, Medium averages 195.9 FPS, High averages 164.6 FPS, and Ultra averages 118.1 FPS.

Q: What is the best preset at 2560x1440 that stays above 60 FPS?

A: Ultra is the best preset at 1440p, averaging 76.3 FPS. All presets at this resolution, from Low at 166 FPS to High at 105.5 FPS, clear the 60 FPS threshold.

Q: Is 4K playable on this hardware?

A: Partially. At 3840x2160, Low averages 85 FPS and Medium averages 66.9 FPS, both playable. High drops to 53.2 FPS and Ultra to 39.2 FPS, both below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rivals in this game?

A: The i3-12100F scores 13494 on average. The Intel Core 3 N355 is identical at 13492, the Intel Core i5-9500 is 0.3% slower, the Intel Core 5 120UL is 0.7% faster, and the Intel Core i7-1250U is 1.1% slower. None of these differences would change the frame rates in Barony.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The RTX 2060 scores 15290 on average. The GTX 580 is at parity with 15283, the Radeon 680M is 0.1% slower, the RTX 3050 OEM is 0.6% slower, and the RX 7600 is 0.8% slower. Again, the deltas are too small to affect Barony's performance.

Q: What is the combos rank for this system in Barony?

A: The database ranks this CPU and GPU combination at 2924 out of 3717 tested combinations. This places it in the lower middle of all tested systems, but the game is so lightweight that the rank does not reflect the playability.

The Verdict

Yes, this PC can run Barony. The verdict by resolution is clear. At 1920x1080, every preset is playable, with Ultra averaging 118.1 FPS. At 2560x1440, every preset is also playable, with Ultra averaging 76.3 FPS. At 3840x2160, only Low and Medium are playable, with Medium averaging 66.9 FPS. High and Ultra at 4K fall below the 60 FPS threshold.

The data shows a system that is overkill for 1080p gaming and more than adequate for 1440p. The RTX 2060 is the limiting factor at 4K, but even then, Medium settings deliver a smooth experience. The i3-12100F never becomes a bottleneck in this title, thanks to its strong single-thread performance. For a roguelike game like Barony, this configuration offers a wide margin of comfort across the most common resolutions.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 66.9 FPS. Low is also playable at 85 FPS, but Medium provides the best visual quality while maintaining the threshold.

At 2560x1440, the most demanding preset is Ultra, with an average of 76.3 FPS. This is the highest quality setting available, and it clears the 60 FPS bar by a comfortable margin.

At 1920x1080, the most demanding preset is also Ultra, with an average of 118.1 FPS. The system has so much headroom at 1080p that even the maximum quality preset leaves room for a high refresh rate display.