Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

37%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
159 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
100 FPS
Ultra 1440p Measured
46 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
24 FPS
9.8ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 25,517
Graphics Card
Required 27,048
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 34 39 53
1440p QHD 46 64 75 100
1080p Full HD 73 102 118 159

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 102
1920x1080 Low 159
1920x1080 Medium 118
1920x1080 Ultra 73
2560x1440 High 64
2560x1440 Low 100
2560x1440 Medium 75
2560x1440 Ultra 46
3840x2160 High 34
3840x2160 Low 53
3840x2160 Medium 39
3840x2160 Ultra 24

Performance Analysis: Barony on Your System

Similar Performance Alternatives

The CPU and GPU in this combination occupy very different positions in the benchmark database. The AMD Ryzen 7 5700 sits near the 78th percentile among all tested CPUs, with an average benchmark score of 25,517. Its nearest rivals are tightly clustered: the Intel Xeon D-2752TER scores 25,530 (0.1% behind), the AMD Ryzen 5 7640U scores 25,485 (0.1% ahead), the AMD Ryzen 5 6600H scores 25,550 (0.1% behind), and the AMD Ryzen 7 5825U scores 25,446 (0.3% ahead). All four rivals land within a 0.4% band of the Ryzen 7 5700, meaning any of these processors would deliver nearly indistinguishable CPU-bound performance in Barony. The practical takeaway is that upgrading or downgrading among these four parts would not shift frame rates in a meaningful way; the differences are within measurement noise.

The Intel Arc B390, by contrast, ranks at the 9th percentile among all GPUs with an average score of 1,482 from the 3DMark Steel Nomad DX12 test. Its nearest rivals are all legacy NVIDIA parts: the GeForce GT 520MX scores 1,463 (1.3% behind), the GeForce 800M scores 1,460 (1.5% behind), the GeForce GT 625 OEM scores 1,446 (2.5% behind), and the GeForce GT 710 scores 1,443 (2.7% behind). This clustering indicates that the Arc B390 is positioned at the very low end of the GPU performance spectrum, comparable to graphics solutions that are now more than a decade old. The delta percentages are small enough that any of these GPUs would produce nearly identical results in Barony, though the Arc B390 does hold a slight edge over each rival.

The asymmetry between CPU and GPU performance is striking. The Ryzen 7 5700 is a strong mid-range processor from 2022, while the Arc B390 is an integrated-class GPU that benchmarks alongside entry-level discrete cards from a previous era. In Barony, this imbalance will manifest as GPU-limited performance at higher resolutions and settings, with the CPU rarely becoming the bottleneck.

CPU and GPU Roles

Barony is a roguelike title, and the recorded measurements show how the balance between CPU and GPU shifts across resolutions and presets. At 1080p with Low settings, the combination reaches 159 FPS average, indicating that neither component is severely stressed. The CPU's 8 cores and 16 threads, based on Zen 3 architecture, provide ample headroom for the game's logic and simulation. The Arc B390, despite its low overall GPU benchmark score, can handle the lightweight rendering demands at this resolution and preset.

As resolution increases, the GPU's role becomes more dominant. Moving from 1080p to 1440p at High settings drops the average from 102 FPS to 64 FPS, a 37% reduction. Moving further to 4K at High settings drops to 34 FPS, another 47% reduction. These scaling patterns are classic signs of GPU-bound performance: the CPU's workload stays roughly constant across resolutions, but the GPU must render more pixels. The Arc B390's modest 24 ROPs and 48 TMUs, along with its system-shared memory architecture, limit its ability to sustain high fill rates at larger resolutions.

Preset scaling within a resolution reveals the same story. At 1080p, raising from Low to Ultra costs 86 FPS (159 to 73), a 54% reduction. At 1440p, the same preset jump costs 54 FPS (100 to 46), also a 54% reduction. At 4K, Low to Ultra drops from 53 to 24 FPS, a 55% reduction. The consistency of these percentage drops across resolutions indicates that the GPU is the limiting factor at all tested configurations. The CPU's performance headroom is never exhausted, as evidenced by the high frame rates at low resolutions where GPU load is minimal.

Measured FPS Breakdown

At 3840x2160, the combination produces its lowest frame rates. Low settings yield 53 FPS average, which is below the 60 FPS playability threshold. Medium settings drop to 39 FPS average, with a minimum of 33 and maximum of 45. High settings yield 34 FPS average, and Ultra settings produce 24 FPS average. None of these configurations clear 60 FPS, and even the fastest 4K preset (Low at 53 FPS) falls short by 7 FPS.

At 2560x1440, the situation improves significantly. Low settings deliver 100 FPS average, comfortably above the threshold. Medium settings average 75 FPS, with a minimum of 64 and maximum of 86, meaning even the worst frame dip stays above 60 FPS. High settings average 64 FPS, which clears the threshold but leaves little margin. Ultra settings drop to 46 FPS average, missing the threshold by 14 FPS.

At 1920x1080, the combination performs well across all presets. Low settings produce 159 FPS average. Medium settings average 118 FPS, with a minimum of 101 and maximum of 136. High settings yield 102 FPS average. Ultra settings still manage 73 FPS average, clearing the threshold with a 13 FPS margin. The minimum frame rates recorded at 1080p Medium (101 FPS) are higher than the average frame rates at 1440p High (64 FPS), illustrating how resolution dominates the performance profile.

The data shows a consistent pattern: each resolution increase of roughly 1.78x pixel count (1080p to 1440p) or 2.25x (1440p to 4K) produces a correspondingly large drop in average FPS. The gap between Low and Ultra presets remains proportionally similar across all resolutions, confirming that the GPU's preset scaling is resolution-independent.

The Verdict

Can this PC run Barony? The answer depends entirely on the target resolution and preset. At 1920x1080, the combination clears 60 FPS at every preset including Ultra, where it averages 73 FPS. This is the resolution where the system is fully playable with no compromises needed. At 2560x1440, the system clears 60 FPS at Low (100 FPS), Medium (75 FPS), and High (64 FPS), but falls short at Ultra (46 FPS). The best playable setting at 1440p is High, which maintains an average of 64 FPS.

At 3840x2160, the system cannot reach 60 FPS at any preset. The best result is Low at 53 FPS average, which is 7 FPS short of the threshold. Medium averages 39 FPS, High averages 34 FPS, and Ultra averages 24 FPS. The database records no playable settings at 4K for this combination.

The verdict is clear: this system is a 1080p machine for Barony, with 1440p capability on medium-high presets as a secondary option. 4K gaming is not achievable at playable frame rates. Players targeting 60 FPS should use 1080p Ultra for the best visual quality, or 1440p High if they prefer a higher resolution with slightly reduced settings.

FAQ

Q: What is the highest preset that maintains 60 FPS at 1920x1080?

A: Ultra settings average 73 FPS at 1080p, which is the highest preset tested and it clears the 60 FPS threshold by 13 FPS.

Q: Can this system run Barony at 2560x1440 with Ultra settings?

A: No. Ultra at 1440p averages 46 FPS, which is 14 FPS below the 60 FPS threshold. The highest playable preset at 1440p is High, averaging 64 FPS.

Q: What is the best 4K performance this combination can achieve?

A: At 3840x2160, Low settings produce 53 FPS average, which is the highest frame rate recorded at that resolution. This still falls short of 60 FPS.

Q: How much performance is lost between 1080p and 4K at High settings?

A: At 1080p High, the average is 102 FPS. At 4K High, the average is 34 FPS. This represents a 67% reduction in frame rate.

Q: Does the CPU or GPU limit performance in Barony?

A: The GPU is the limiting factor. The Ryzen 7 5700 ranks at the 78th CPU percentile, while the Arc B390 ranks at the 9th GPU percentile. Frame rates scale consistently with resolution and preset changes, indicating GPU-bound performance throughout.

Q: What is the minimum FPS recorded at 1080p Medium?

A: The minimum recorded at 1080p Medium is 101 FPS, with an average of 118 FPS and a maximum of 136 FPS.

How This Combo Ranks

Among all 3,717 tested CPU-GPU combinations in the database, this pairing of AMD Ryzen 7 5700 and Intel Arc B390 ranks 3,300th in Barony. This places it in the bottom 11% of all tested configurations. The low ranking is driven almost entirely by the GPU's weak performance; the CPU is in the top 22% of processors, but the Arc B390's 9th percentile GPU ranking drags the overall combination down.

The rank of 3,300 out of 3,717 means that 417 tested combinations perform worse in Barony, while 3,299 perform better. This is consistent with the measured FPS data: the system can handle 1080p and 1440p gaming, but it is far from competitive with mid-range or high-end configurations. The CPU's strength is effectively wasted in this pairing because the GPU cannot translate processor headroom into higher frame rates at demanding settings. For Barony specifically, the game's roguelike nature means the CPU's 16 threads are more than sufficient, but the GPU's limited pixel throughput becomes the bottleneck at higher resolutions.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 73 FPS. This provides the maximum visual quality while maintaining a playable frame rate. The margin of 13 FPS above the threshold gives some headroom for demanding scenes, though the minimum FPS at Ultra was not recorded.

At 2560x1440, the most demanding playable preset is High, averaging 64 FPS. This clears the 60 FPS threshold by only 4 FPS, leaving a smaller margin than at 1080p Ultra. Medium at 1440p averages 75 FPS and provides a more comfortable buffer if frame rate stability is a priority. The recorded minimum at Medium is 64 FPS, which exactly matches the threshold.

At 3840x2160, no preset reaches 60 FPS. The database records no best settings for 4K, and the highest achievable average is 53 FPS at Low settings. Players attempting 4K would need to accept frame rates below the playability threshold regardless of preset selection. The system is therefore not recommended for 4K gaming in Barony, and the practical ceiling for this combination remains 1440p High or 1080p Ultra.