Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
276 FPS
Ultra 1080p Measured
124 FPS

1440p (2K / QHD)

Low 1440p Measured
172 FPS
Ultra 1440p Measured
81 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
41 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 20,468
Graphics Card
Required 27,048
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 58 70 89
1440p QHD 81 110 131 172
1080p Full HD 124 179 202 276

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 179
1920x1080 Low 276
1920x1080 Medium 202
1920x1080 Ultra 124
2560x1440 High 110
2560x1440 Low 172
2560x1440 Medium 131
2560x1440 Ultra 81
3840x2160 High 58
3840x2160 Low 89
3840x2160 Medium 70
3840x2160 Ultra 41

Performance Analysis: Barony on Your System

The AMD Ryzen 5 5600 and Intel Arc B580 combination delivers a wide range of performance in Barony, scaling from a demanding 4K experience to a high-refresh-rate 1080p setup. The measured data shows that the system is highly capable at lower resolutions, with performance dropping predictably as pixel count and graphical load increase.

FAQ

Q: What is the best resolution for this PC to run Barony?

A: At 1920x1080, the system achieves 124.1 FPS on Ultra settings, which is the highest playable preset at that resolution. At 2560x1440, it still runs Ultra at 81.3 FPS. At 3840x2160, the best playable setting is Medium with 69.7 FPS.

Q: Can this system run Barony at 4K resolution?

A: Yes, but not at maximum settings. At 3840x2160, the system maintains 60 FPS on Low (89.1 FPS) and Medium (69.7 FPS) presets. The High preset drops to 57.7 FPS, and Ultra falls to 41.4 FPS, both below the 60 FPS threshold.

Q: How does the Ryzen 5 5600 compare to its nearest rivals?

A: The CPU’s average benchmark score is 20468. Its closest rival, the Intel Core Ultra 7 258V, scores 20454, which is a 0.1% difference. The AMD Ryzen 5 8500G and AMD EPYC 9454P are also within 0.2% of its score, indicating near-identical overall performance.

Q: How does the Intel Arc B580 compare to its nearest rivals?

A: The GPU’s average benchmark score is 23021. The AMD Radeon RX 580 2048SP scores 23061, a delta of -0.2%. The NVIDIA GeForce RTX 2080 scores 22895, a 0.6% difference, while the NVIDIA GeForce RTX 3080 scores 23172, a -0.7% difference.

Q: What is the performance gap between Low and Ultra settings at 1440p?

A: At 2560x1440, the Low preset delivers 172.3 FPS, while the Ultra preset delivers 81.3 FPS. This represents a 91 FPS drop when moving from the least to most demanding preset, showing a significant scaling cost.

Q: Does the system ever dip below 60 FPS at 1080p?

A: No. At 1920x1080, even the most demanding Ultra preset maintains 124.1 FPS. All other presets at this resolution exceed 178 FPS, so the system comfortably stays above the playable threshold.

Similar Performance Alternatives

Based on the nearest rival data, the CPU and GPU in this combo have close performance matches that would yield similar behavior in Barony. The AMD Ryzen 5 5600’s average benchmark score of 20468 places it directly alongside the Intel Core Ultra 7 258V (20454), the AMD Ryzen 5 8500G (20425), and the AMD EPYC 9454P (20422). These processors all fall within a 0.2% performance delta, meaning any of them would produce nearly identical frame rates in CPU-bound scenarios.

The Intel Arc B580’s average score of 23021 aligns it with the AMD Radeon RX 580 2048SP (23061), the NVIDIA GeForce RTX 2080 (22895), and the NVIDIA GeForce RTX 3080 (23172). The deltas range from -0.7% to 0.6%, suggesting these GPUs would deliver comparable FPS figures in Barony. For instance, the RTX 2080, being 0.6% slower, might produce marginally lower frame rates at 4K Ultra, but the difference would be negligible in practice.

For users seeking a similar experience, swapping in any of these rival components would not materially change the measured outcomes. The performance clustering is tight, with all rivals within roughly 1% of the core components. This means the system’s behavior—such as hitting 69.7 FPS at 4K Medium or 124.1 FPS at 1080p Ultra—would remain effectively unchanged with any of these alternatives installed.

CPU and GPU Roles

The benchmark data reveals how the CPU and GPU share responsibility across resolutions in Barony. At 1920x1080, the system shows exceptional headroom, with the Low preset hitting 276.4 FPS and Ultra still reaching 124.1 FPS. The scaling from Low to Ultra at this resolution—a drop of 152.3 FPS—indicates that the GPU is the limiting factor as graphical settings increase, since the CPU has ample capacity to feed frames at these high rates.

Moving to 2560x1440, the same pattern holds but with compressed numbers. The Low preset produces 172.3 FPS, while Ultra yields 81.3 FPS. The delta between presets remains large (91 FPS), but the overall reduction from 1080p to 1440p at each setting (e.g., 276.4 to 172.3 FPS at Low) shows the GPU’s workload increasing with pixel count.

At 3840x2160, the GPU becomes the clear bottleneck. The Low preset drops to 89.1 FPS, and Ultra falls to 41.4 FPS. The gap between Low and Ultra at 4K is 47.7 FPS, which is proportionally smaller than at lower resolutions, suggesting that the GPU is saturated and cannot scale as effectively. The CPU’s role diminishes at 4K, as the system’s frame rate is constrained by the Arc B580’s rendering capabilities rather than the Ryzen 5 5600’s processing speed.

The data shows that at 1080p and 1440p, the GPU is the primary determinant of performance when changing presets, while the CPU maintains enough throughput to avoid limiting frame rates. At 4K, the GPU’s limitations dominate, and the CPU’s performance becomes less relevant to the final FPS.

The Verdict

This PC can run Barony at all tested resolutions, but the playable settings vary by resolution. At 1920x1080, the system clears 60 FPS on every preset, including Ultra with 124.1 FPS. At 2560x1440, all four presets also exceed 60 FPS, with Ultra achieving 81.3 FPS. These two resolutions offer full flexibility for the player.

At 3840x2160, the system remains playable but with restrictions. The Low preset delivers 89.1 FPS, and Medium delivers 69.7 FPS, both clearing the 60 FPS threshold. However, High drops to 57.7 FPS and Ultra to 41.4 FPS, which are below the playable threshold. Therefore, 4K gaming is viable only at Low or Medium settings.

The verdict is clear: this combination is highly capable for 1080p and 1440p gaming, and it can handle 4K with adjusted settings. The system’s best performance at each resolution is defined by the most demanding preset that maintains 60 FPS or higher.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, with an average frame rate of 69.7 FPS. The Low preset also works at 89.1 FPS, but Medium offers a better visual experience while still exceeding the threshold. High and Ultra are not recommended at this resolution due to sub-60 FPS performance.

At 2560x1440, the best setting is Ultra, which delivers 81.3 FPS. This is the highest preset available and it comfortably clears the 60 FPS mark. All other presets—High (109.7 FPS), Medium (130.5 FPS), and Low (172.3 FPS)—also work, but Ultra provides the maximum visual quality without sacrificing playability.

At 1920x1080, the best setting is also Ultra, achieving 124.1 FPS. The system has enough headroom to run the game at maximum settings with a high frame rate, making this the optimal choice for smooth gameplay. Low (276.4 FPS), Medium (202.4 FPS), and High (178.5 FPS) are all viable but unnecessary given the Ultra performance.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600 and Intel Arc B580 ranks 2836 out of 3717 tested combos for Barony. This places it in the lower-middle portion of the database, indicating that while it can run the game well at many settings, there are numerous other hardware pairings that achieve higher frame rates. The rank reflects the system’s overall performance across all resolutions and presets.

Given the 60 FPS playable threshold, the system’s rank is influenced by its 4K limitations, where High and Ultra presets fail to meet the mark. At 1080p and 1440p, the system performs strongly, but the 4K shortfall pulls the overall rank down relative to combos that can handle Ultra at all resolutions. The data shows that this pairing is a solid mid-tier option, but not a top performer for Barony.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. The Low preset averages 276.4 FPS, Medium averages 202.4 FPS, High averages 178.5 FPS, and Ultra averages 124.1 FPS. All values are well above the 60 FPS threshold, with even the most demanding preset leaving significant headroom. The scaling from Low to Ultra shows a reduction of 152.3 FPS, reflecting the increased graphical load.

At 2560x1440, performance remains strong but drops from 1080p levels. Low averages 172.3 FPS, Medium averages 130.5 FPS, High averages 109.7 FPS, and Ultra averages 81.3 FPS. Each preset is still above 60 FPS, with Ultra being the closest to the threshold at 81.3 FPS. The gap between Low and Ultra is 91 FPS, showing a consistent scaling pattern.

At 3840x2160, the system shows its limits. Low averages 89.1 FPS, Medium averages 69.7 FPS, High averages 57.7 FPS, and Ultra averages 41.4 FPS. Only Low and Medium clear the 60 FPS mark. High falls short by 2.3 FPS, and Ultra falls short by 18.6 FPS. The data shows a steep drop from Medium to High, indicating that the GPU struggles with the higher presets at this resolution. No min or max FPS values are available in the data, so the analysis relies solely on average frame rates.