Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 34 | 39 | 53 |
| 1440p QHD | 46 | 64 | 75 | 100 |
| 1080p Full HD | 73 | 102 | 118 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
Measured FPS Breakdown
The benchmark data for Barony on this AMD Ryzen 5 5600 + Intel Arc B390 combination shows a clear scaling pattern across resolutions and settings. At 3840x2160, the system struggles to maintain fluid frame rates. High settings produce an average of 34 FPS, Medium dips to 39 FPS with a minimum of 33 FPS and a maximum of 45 FPS, and Low reaches 53 FPS. Ultra is the weakest showing at just 24 FPS average. None of these 4K results approach the 60 FPS playability threshold, so this resolution is effectively out of reach for smooth gameplay with this hardware.
Moving to 2560x1440, the picture improves substantially. Low settings hit 100 FPS average, Medium delivers 75 FPS with a recorded range of 64 to 86 FPS, and High reaches 64 FPS average. Ultra drops to 46 FPS, which falls short of the playability mark. The data indicates that High is the most demanding preset that stays playable at this resolution, while Low and Medium also clear the threshold comfortably.
At 1920x1080, the combination performs strongly across the board. Low settings produce 159 FPS average, Medium hits 118 FPS with a minimum of 101 FPS and a maximum of 136 FPS, High reaches 102 FPS average, and Ultra manages 73 FPS. Every preset at 1080p exceeds the 60 FPS target, making this resolution fully playable regardless of graphics level. The gap between 1080p and 1440p is significant, with High settings dropping from 102 FPS to 64 FPS, a reduction of roughly 37 percent. Between 1440p and 4K, High settings fall from 64 FPS to 34 FPS, nearly halving again.
The Intel Arc B390, with its 1536 shading units, 48 texture mapping units, and 24 raster output units, appears to be the limiting factor at higher resolutions. The Ryzen 5 5600, with 6 cores and 12 threads boosting to 4.40 GHz, has ample headroom for this roguelike title, but the GPU's shared memory architecture and integrated design constrain performance when pixel count rises.
How This Combo Ranks
The database places this CPU and GPU pairing at rank 3300 out of 3717 tested combinations for Barony. That puts it in the lower 11 percent of all recorded configurations, which aligns with the measured frame rates at higher resolutions. The combo rank reflects the GPU's modest standing among all graphics cards: the Intel Arc B390 sits at the 9th percentile of all GPUs in the database, with an average benchmark score of 1482.
The Ryzen 5 5600, by contrast, performs much better in isolation. It holds the 74th percentile among all CPUs with an average benchmark score of 20468. Its nearest rivals in CPU benchmarks include the Intel Core Ultra 7 258V at 20454 (0.1 percent slower), the AMD Ryzen 5 8500G at 20425 (0.2 percent slower), and the AMD EPYC 9454P at 20422 (0.2 percent slower). The EPYC 7713 trails slightly at 20363, a 0.5 percent gap. These margins are tiny, indicating the 5600 sits in a dense cluster of similarly capable processors.
The GPU's nearest rivals are all much older, lower-end parts. The NVIDIA GeForce GT 520MX scores 1463, just 1.3 percent behind the Arc B390. The GeForce 800M is 1.5 percent slower at 1460, the GeForce GT 625 OEM trails by 2.5 percent at 1446, and the GeForce GT 710 is 2.7 percent behind at 1443. This places the Arc B390 in company with entry-level graphics solutions from a decade ago, which explains why 4K resolution produces such low frame rates in Barony.
The rank of 3300 out of 3717 means that roughly 417 tested combinations perform worse, while over 3300 perform better. For a game like Barony, which is not graphically demanding by modern standards, this rank indicates the system can handle the title at lower resolutions but lacks the headroom for high-resolution gaming.
FAQ
Q: Can this system run Barony at 1080p with max settings?
A: Yes. At 1920x1080 with Ultra settings, the combination averages 73 FPS, which clears the 60 FPS playability threshold by a comfortable margin.
Q: What is the best playable setting at 2560x1440?
A: High settings produce 64 FPS average at 1440p, making it the most demanding preset that stays playable. Ultra drops to 46 FPS and is not recommended.
Q: Is 4K gaming viable with this hardware?
A: No. The best 4K result is 53 FPS on Low settings, and High, Medium, and Ultra all fall below 40 FPS. The verdict database records no playable settings at 3840x2160.
Q: How does the Ryzen 5 5600 compare to its closest CPU rivals?
A: The 5600 scores 20468 on average, while the Intel Core Ultra 7 258V scores 20454 (0.1 percent lower), the Ryzen 5 8500G scores 20425 (0.2 percent lower), and the EPYC 9454P scores 20422 (0.2 percent lower). Performance is effectively identical among these processors.
Q: How does the Intel Arc B390 compare to its closest GPU rivals?
A: The Arc B390 scores 1482, which is 1.3 percent ahead of the GeForce GT 520MX, 1.5 percent ahead of the GeForce 800M, 2.5 percent ahead of the GeForce GT 625 OEM, and 2.7 percent ahead of the GeForce GT 710.
Q: What frame rates can I expect at Medium settings in 1080p?
A: Medium settings at 1920x1080 average 118 FPS, with a minimum of 101 FPS and a maximum of 136 FPS. This provides a smooth experience with minimal frame drops.
Similar Performance Alternatives
For the CPU, the Ryzen 5 5600's nearest rivals in benchmark scores are all within 0.5 percent of its 20468 average. The Intel Core Ultra 7 258V, AMD Ryzen 5 8500G, and AMD EPYC 9454P all effectively match its compute performance, meaning any of these processors would deliver nearly identical frame rates in Barony when paired with the same GPU. The AMD EPYC 7713 is also close at 20363, a 0.5 percent deficit that would be imperceptible in real gameplay.
On the GPU side, the Intel Arc B390's nearest rivals are the NVIDIA GeForce GT 520MX, GeForce 800M, GeForce GT 625 OEM, and GeForce GT 710. These GPUs score between 1443 and 1463, within 2.7 percent of the Arc B390's 1482. In practical terms, any of these graphics solutions would produce similar performance in Barony, meaning the same resolution and settings breakdown would apply. The 1.3 to 2.7 percent deltas translate to roughly 1 to 2 FPS differences at the frame rates measured in this benchmark, which is within the noise of real-world testing.
The implication for builders is that the CPU is not the bottleneck here. Swapping the Ryzen 5 5600 for any of its nearest rivals would change nothing meaningful in Barony. The GPU, however, sits in a performance class that is several tiers below modern discrete graphics cards, and its nearest rivals are all legacy parts. Upgrading the GPU would yield far larger gains than changing the processor.
Best Settings per Resolution
At 3840x2160, no preset reaches 60 FPS. The best achievable average is 53 FPS on Low settings, which still falls short of the playability threshold. The database records no playable settings at this resolution, so even the least demanding option cannot provide a smooth experience.
At 2560x1440, the most demanding preset that stays at or above 60 FPS is High, with an average of 64 FPS. Low settings run at 100 FPS and Medium at 75 FPS, but High offers the best visual quality while remaining playable. Ultra at 46 FPS is not recommended.
At 1920x1080, Ultra settings are the most demanding preset that clears the 60 FPS mark, averaging 73 FPS. This is the optimal choice for maximum visual fidelity, though High (102 FPS), Medium (118 FPS), and Low (159 FPS) all provide increasingly higher frame rates for users who prioritize smoothness over graphics.
The pattern is consistent: 1080p is fully playable at any setting, 1440p is playable up to High, and 4K is not playable at any setting. Users with 1440p monitors should select High for the best balance, while 4K users would need to either lower resolution or upgrade the GPU.
The Verdict
This system can run Barony, but the experience depends heavily on the display resolution. At 1920x1080, every preset from Low to Ultra clears the 60 FPS threshold, with Ultra averaging 73 FPS. This makes 1080p the sweet spot for this combination, offering full flexibility in graphics settings. At 2560x1440, High settings average 64 FPS and represent the ceiling for playable performance, while Low and Medium also work well. Ultra at 1440p falls to 46 FPS and should be avoided.
At 3840x2160, the verdict is unambiguous: no settings are playable. The best result, 53 FPS on Low, still misses the 60 FPS target, and higher presets drop to 24 to 39 FPS. The Intel Arc B390's shared memory architecture and low shader count relative to modern discrete GPUs prevent it from handling 4K rendering in this title. The Ryzen 5 5600, which ranks in the 74th percentile of all CPUs, is not the constraint; the GPU's 9th percentile standing among all GPUs is the limiting factor.
For practical use, this PC is a solid 1080p machine for Barony, a capable 1440p machine with settings capped at High, and unsuitable for 4K gaming. The data shows a clear, predictable performance curve that scales with resolution and preset, and users should set expectations accordingly. If the target display is 1080p, this system delivers smooth gameplay at maximum settings. If 1440p is the goal, High settings provide a playable experience. For 4K, a different GPU would be required.