Instant compatibility check with FPS benchmarks and optimization tips
Barony
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 58 | 68 | 91 |
| 1440p QHD | 80 | 112 | 130 | 175 |
| 1080p Full HD | 127 | 177 | 206 | 277 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Barony on Your System
The AMD Ryzen 5 5500 and Intel Arc B580 combination delivers a wide spread of performance in Barony, ranging from an unplayable 42 FPS average at 4K Ultra to a highly fluid 277 FPS average at 1080p Low. Benchmark data shows this pairing is capable of clearing the 60 FPS threshold at most settings, but the heaviest 4K preset falls short. This analysis breaks down the measured frame rates, the balance between CPU and GPU load, and what nearby hardware options would offer similar results.
Best Settings per Resolution
At 3840x2160, the most demanding preset that maintains an average at or above 60 FPS is Medium, with a measured average of 68 FPS. The data shows a clear drop-off above this point: High averages 58 FPS, just under the playable line, while Ultra falls to 42 FPS. Low runs at 91 FPS, but Medium offers the best visual quality while still clearing the threshold.
For 2560x1440, the situation is much more favorable. All four tested presets—Low, Medium, High, and Ultra—stay above 60 FPS. The most demanding setting that qualifies is Ultra, producing an average of 80 FPS. This leaves headroom over the minimum requirement, making Ultra the clear recommendation at this resolution. Low hits 175 FPS, Medium 130 FPS, and High 112 FPS.
At 1920x1080, every preset comfortably exceeds 60 FPS, so the best choice is Ultra, which delivers an average of 127 FPS. The lower presets scale dramatically: Medium reaches 206 FPS, High 177 FPS, and Low tops out at 277 FPS. Given that even the heaviest setting nearly doubles the playable threshold, Ultra is the only sensible option for 1080p displays.
CPU and GPU Roles
The measured data reveals a pattern where the GPU becomes the dominant constraint as resolution climbs, while the CPU’s role diminishes. At 1920x1080, the average frame rate jumps from 127 FPS at Ultra to 277 FPS at Low, a difference of 150 FPS that reflects how much load shifts onto the graphics card as settings are reduced. The Ryzen 5 5500, with its 6 cores and 12 threads, appears sufficient to feed the Arc B580 at this resolution, since even the lowest preset produces frame rates far beyond typical display refresh rates.
Moving to 2560x1440, the scaling from Low to Ultra is 95 FPS (from 175 to 80), indicating a tighter relationship between settings and performance. The GPU’s work increases with each preset, but the CPU still keeps pace. At 3840x2160, the gap between Low (91 FPS) and Ultra (42 FPS) is 49 FPS, and the fact that High drops below 60 FPS suggests the Arc B580’s rendering capacity, not the processor, is the limiting factor. The GPU’s 12 GB of memory and 192-bit bus handle the higher resolution workloads, but the raw compute—13.67 TFLOPS FP32—becomes the bottleneck at 4K Ultra.
The percentile rankings reinforce this split. The CPU sits in the 73rd percentile among all processors, while the GPU is in the 68th percentile among all graphics cards. Neither component is a top-tier part, but the data indicates that for Barony, the GPU’s performance ceiling is what determines whether 4K High or Ultra is playable. At lower resolutions, the CPU’s single-thread performance (a Geekbench single-core score of 1730) proves adequate, since the frame rates at 1080p Low and Medium are far above what the GPU alone could produce if the processor were stalling.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the Ryzen 5 5500’s average benchmark score of 19593 places it within a narrow band of comparable processors. The AMD Ryzen AI 5 430 scores 19617, a -0.1% difference, meaning it would behave nearly identically in Barony at the same settings. The Intel Core i5-12500 scores 19668 (-0.4% relative), so users with that chip would see virtually the same frame rates. The Intel Core i7-10700F is slightly behind at 19499 (0.5% ahead of the Ryzen 5 5500 in this comparison), while the Intel Core i5-11600KF leads the group at 19723 (-0.7%). These deltas are all under one percent, so any of these processors would deliver indistinguishable performance in this game.
On the GPU side, the Arc B580’s average score of 23021 aligns closely with several other cards. The AMD Radeon RX 580 2048SP scores 23061, just -0.2% different, suggesting it would produce nearly the same FPS numbers at each resolution and preset. The NVIDIA GeForce RTX 2080 comes in at 22895 (0.6% behind the Arc B580), meaning it would likely be a few frames slower but still within the same playability tier. The NVIDIA GeForce RTX 3080 scores 23172 (-0.7%), a marginal edge that could translate to 1-2 FPS in practice. Finally, the NVIDIA P106-100 scores 23249 (-1%), the closest match of the group. None of these alternatives would change the verdict for any resolution—4K Ultra remains below 60 FPS, and 1440p Ultra stays playable.
The Verdict
This PC can run Barony at 60 FPS or higher in most configurations, but not at the absolute maximum settings on a 4K display. The verdict data shows that at 3840x2160, only Low and Medium are playable, with Medium being the best option at 68 FPS average. High falls short at 58 FPS, and Ultra is well below the line at 42 FPS. For 4K users, the choice is between accepting Medium visuals or dropping to a lower resolution for higher fidelity.
At 2560x1440, the system clears 60 FPS on every preset. The best playable setting is Ultra, with an average of 80 FPS, which leaves enough margin for demanding scenes. The minimum recorded FPS at Medium is 111, so even the lowest dips stay far above the threshold. This makes 1440p Ultra the sweet spot for this hardware.
At 1920x1080, the verdict is unambiguous: all presets are playable, and Ultra runs at 127 FPS average. The GPU’s utilization at this resolution is less stressed, as evidenced by the 277 FPS Low result, so users with high-refresh monitors can exploit the headroom. The combination of the Ryzen 5 5500 and Arc B580 is fully capable of delivering a smooth experience at 1080p and 1440p, while 4K requires a moderate preset reduction.
Measured FPS Breakdown
At 3840x2160, the measured averages are as follows: Low runs at 91 FPS, Medium at 68 FPS with a minimum of 58 FPS and maximum of 78 FPS, High at 58 FPS, and Ultra at 42 FPS. The Medium preset’s minimum of 58 FPS means brief dips below the 60 FPS target are possible, but the average stays above it. High and Ultra lack min/max data, so only the averages are available.
For 2560x1440, Low achieves 175 FPS, Medium 130 FPS (min 111, max 150), High 112 FPS, and Ultra 80 FPS. The Medium results show a range that stays well clear of any stutter risk, with the minimum still nearly double the playable threshold. High and Ultra have no reported min/max values, but their averages suggest consistent performance.
At 1920x1080, the numbers are: Low 277 FPS, Medium 206 FPS (min 175, max 237), High 177 FPS, and Ultra 127 FPS. The Medium preset’s minimum of 175 FPS indicates that even frame-time spikes would be imperceptible on most monitors. The Ultra average of 127 FPS provides a comfortable cushion for 120 Hz displays, though not for 144 Hz panels running at maximum settings.
FAQ
Q: Can this PC run Barony at 4K with high settings?
A: No. At 3840x2160 with High settings, the average FPS is 58, which is below the 60 FPS playable threshold. Medium is the highest playable preset at 4K, averaging 68 FPS.
Q: What is the best preset for 2560x1440?
A: Ultra is the best playable setting at 1440p, delivering an average of 80 FPS. All four presets (Low, Medium, High, Ultra) exceed 60 FPS at this resolution.
Q: How does the Arc B580 compare to the RTX 2080 in this system?
A: The Arc B580 has an average benchmark score of 23021, while the RTX 2080 scores 22895, a 0.6% difference. In Barony, the two cards would produce nearly identical frame rates across all resolutions and presets.
Q: Is the Ryzen 5 5500 a bottleneck at 1080p?
A: The data suggests no. At 1920x1080 Low, the system reaches 277 FPS average, and at Ultra it maintains 127 FPS. The CPU’s single-thread benchmark score of 1730 (Geekbench) appears sufficient to keep up with the GPU at this resolution.
Q: What is the lowest FPS recorded for this hardware in Barony?
A: The lowest average is 42 FPS at 3840x2160 Ultra. The minimum FPS recorded for any preset is 58 FPS, which occurs at 4K Medium; no min/max data is available for other presets.
Q: How many CPU and GPU combinations were ranked for this game?
A: This specific pairing ranks 2789 out of 3717 total combinations. The CPU and GPU both sit in the upper-middle percentiles (CPU 73rd, GPU 68th), which aligns with the observed performance that is strong at lower resolutions but limited at 4K Ultra.