Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
277 FPS
Ultra 1080p Measured
127 FPS

1440p (2K / QHD)

Low 1440p Measured
175 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
91 FPS
Ultra 4K Measured
42 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 17,035
Graphics Card
Required 27,048
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 58 68 91
1440p QHD 80 112 130 175
1080p Full HD 127 177 206 277

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 177
1920x1080 Low 277
1920x1080 Medium 206
1920x1080 Ultra 127
2560x1440 High 112
2560x1440 Low 175
2560x1440 Medium 130
2560x1440 Ultra 80
3840x2160 High 58
3840x2160 Low 91
3840x2160 Medium 68
3840x2160 Ultra 42

Performance Analysis: Barony on Your System

Measured FPS Breakdown

At 1920x1080, the AMD Ryzen 5 3600 and Intel Arc B580 combination delivers exceptional performance across all settings. The Low preset reaches an average of 277 FPS, while Medium drops to 206 FPS with a minimum of 175 FPS and a maximum of 237 FPS. High settings still produce 177 FPS on average, and even the most demanding Ultra preset maintains 127 FPS. This resolution shows no signs of strain, with all presets far exceeding the 60 FPS playability threshold.

Moving to 2560x1440, frame rates remain very high. Low settings yield 175 FPS average, Medium drops to 130 FPS with a recorded minimum of 111 FPS and maximum of 150 FPS. High settings produce 112 FPS average, and Ultra still manages 80 FPS. The gap between Low and Ultra at this resolution is 95 FPS, indicating a moderate scaling cost as visual fidelity increases.

At 3840x2160, performance becomes more constrained. Low settings still deliver 91 FPS average, Medium drops to 68 FPS with a minimum of 58 FPS and maximum of 78 FPS. High settings fall to 58 FPS average, which sits just below the playable threshold. Ultra drops further to 42 FPS average. The scaling from Low to Ultra at 4K is severe: a 49 FPS reduction, showing that the Arc B580's rendering load at 2160p is substantial.

The data shows a clear pattern: 1080p and 1440p are firmly in high-refresh territory, while 4K requires either Medium or Low settings to stay playable. The measured minimums at Medium settings across all resolutions (175 FPS at 1080p, 111 FPS at 1440p, 58 FPS at 4K) indicate that frame pacing remains consistent even when average FPS drops.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with a measured average of 127 FPS. This leaves substantial headroom above the playability threshold, meaning users can enable maximum settings without concern.

At 2560x1440, Ultra is again the highest playable preset, averaging 80 FPS. This is comfortably above 60 FPS, so full visual quality is achievable at this resolution.

At 3840x2160, the most demanding preset that maintains 60 FPS or better is Medium, with an average of 68 FPS. While High settings average 58 FPS (just under the threshold), Medium provides the best visual quality while staying playable. Ultra at 42 FPS is not recommended for a consistent experience.

FAQ

Q: Can this PC run Barony at 4K with High settings?

A: No. At 3840x2160 with High settings, the average FPS is 58, which falls just below the 60 FPS playability threshold. The recorded data shows that Medium settings are the highest playable preset at 4K, with an average of 68 FPS.

Q: What is the highest settings preset that can maintain 60 FPS at 1440p?

A: Ultra settings at 2560x1440 produce an average of 80 FPS, making it the most demanding preset that stays above the playability threshold. All four presets (Low, Medium, High, Ultra) are playable at this resolution.

Q: How much performance is lost between Low and Ultra at 1080p?

A: At 1920x1080, Low settings average 277 FPS, while Ultra averages 127 FPS. That is a 150 FPS difference, which represents a 54% reduction in average frame rate when moving from the lowest to the highest preset.

Q: Are there any settings where the minimum FPS drops below 60 at 1440p?

A: The recorded data includes only one min FPS value at 1440p: Medium settings have a minimum of 111 FPS. For other presets, min FPS is not recorded, but the average FPS for all presets (ranging from 80 to 175 FPS) indicates no preset approaches the 60 FPS threshold.

Q: Does 4K Medium keep the frame rate stable?

A: Yes, 4K Medium averages 68 FPS with a minimum of 58 FPS and a maximum of 78 FPS. The minimum is slightly below the 60 FPS threshold, but the average is comfortably above it, indicating only occasional brief dips.

Q: What is the best preset for smooth 4K gameplay?

A: The data indicates Medium settings at 4K provide the best visual quality with an average of 68 FPS. Low settings can reach 91 FPS, but that sacrifices visual fidelity. High and Ultra are not recommended at this resolution since they average 58 and 42 FPS respectively.

Similar Performance Alternatives

For the CPU side, the AMD Ryzen 5 3600 sits near several processors with similar average benchmark scores. The Intel Core i7-1260P has an average score of 17007, which is 0.2% lower than the Ryzen 5 3600's 17035. The AMD EPYC 7742 scores 16998, also 0.2% lower. The Intel Core i5-11400 scores 17067, 0.2% higher, and the AMD EPYC 7573X scores 17070, 0.2% higher. These four chips bracket the Ryzen 5 3600 within a narrow performance band, meaning any of them would deliver nearly identical frame rates in Barony.

For the GPU, the Intel Arc B580 has an average benchmark score of 23021. The AMD Radeon RX 580 2048SP scores 23061, which is 0.2% higher. The NVIDIA GeForce RTX 2080 scores 22895, which is 0.6% lower. The NVIDIA GeForce RTX 3080 scores 23172, 0.7% higher. The NVIDIA P106-100 scores 23249, 1% higher. These four GPUs are all within roughly 1% of the Arc B580's average score, so they would produce similar FPS numbers in the measured scenarios, with the RTX 2080 being the closest match at just 0.6% difference.

Since the CPU and GPU individually rank near these specific rivals, a system swapping the Ryzen 5 3600 for an Intel Core i5-11400 or swapping the Arc B580 for an RTX 2080 would be expected to deliver nearly identical results in Barony at every resolution and preset.

The Verdict

Yes, this PC can run Barony. The verdict by resolution is clear. At 1920x1080, all four presets are playable, with Ultra averaging 127 FPS and Low at 277 FPS. At 2560x1440, all four presets are also playable, with Ultra at 80 FPS and Low at 175 FPS. At 3840x2160, only Low and Medium are playable, with Medium at 68 FPS and Low at 91 FPS. High at 4K falls short with 58 FPS average, and Ultra at 4K produces only 42 FPS.

The threshold for playable is 60 FPS, and the data shows that the system clears it easily at 1080p and 1440p, even at maximum quality. At 4K, users need to compromise with Medium or Low settings, but the game remains smooth. For the target of 60 FPS, this combination is more than capable at the two lower resolutions and still usable at 4K with adjusted settings.

How This Combo Ranks

The AMD Ryzen 5 3600 and Intel Arc B580 combination ranks 2789 out of 3717 tested combos in Barony. That places this pairing in the 75th percentile of all combinations in the database, meaning it outperforms about three quarters of the tested systems. The rank reflects the balance between the CPU's 71st percentile score among all processors and the GPU's 68th percentile among all GPUs, with the combination landing slightly higher than either component alone would suggest.

In practical terms, this ranking indicates that while not a top-tier system, it sits in the upper third of tested configurations. The combination is strong enough for high-refresh 1080p gameplay and comfortable 1440p gaming, and it is only at 4K that the system falls behind more expensive configurations.

CPU and GPU Roles

The data shows that the Intel Arc B580 is the primary driver of performance scaling in Barony, rather than the CPU. The Ryzen 5 3600 has a percentile rank of 71 among all CPUs, and the Arc B580 ranks 68 among GPUs, but the FPS scaling across presets and resolutions reveals the GPU's dominance.

At 1080p, the difference between Low and Ultra is 150 FPS (277 to 127), which is a 54% reduction. At 1440p, the same preset change reduces FPS from 175 to 80, a 54% drop. At 4K, the difference from Low to Ultra is 49 FPS (91 to 42), which is 54%. This consistent proportional scaling across all resolutions indicates that the GPU is the limiting factor, because the CPU workload does not change substantially with resolution changes, while the GPU load does.

When resolution increases from 1080p to 4K at the same preset, the FPS drop is significant. At Ultra, the drop is from 127 FPS at 1080p to 42 FPS at 4K, a 67% reduction. At Medium, the drop is from 206 FPS to 68 FPS, a 67% reduction. At Low, the drop is from 27 7 to 91 FPS, a 67% reduction. This consistent 67% reduction across settings as resolution increases is a clear sign that the GPU's rendering throughput is the main constraint, not the CPU.

The CPU contributes to the maximum FPS ceiling at lower resolutions. At 1080p Low, the system reaches 277 FPS, which is well above what most games require. The Ryzen 5 3600's multi-threaded performance, measured at 15045 in Cinebench R23 multi-core and 17700 in Passmark multithread, is sufficient to feed the GPU at all tested settings. The CPU's relative weakness only appears at 4K, where the GPU's limitations become the dominant factor.

In summary: at 1080p and 1440p, the GPU handles the scaling, and the CPU has ample headroom. At 4K, the GPU is clearly the limiting factor, and the CPU's performance is irrelevant to the outcome. Upgrading the GPU would yield larger FPS gains at 4K, while upgrading the CPU would mainly benefit frame rates at 1080p, where the system already exceeds 127 FPS at Ultra.