Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Barony
Roguelike 2015

Barony

25%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
159 FPS
Ultra 1080p Measured
73 FPS

1440p (2K / QHD)

Low 1440p Measured
100 FPS
Ultra 1440p Measured
46 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
24 FPS
9.8ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,518
Your CPU 17,035
Graphics Card
Required 27,048
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 34 39 53
1440p QHD 46 64 75 100
1080p Full HD 73 102 118 159

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 102
1920x1080 Low 159
1920x1080 Medium 118
1920x1080 Ultra 73
2560x1440 High 64
2560x1440 Low 100
2560x1440 Medium 75
2560x1440 Ultra 46
3840x2160 High 34
3840x2160 Low 53
3840x2160 Medium 39
3840x2160 Ultra 24

Performance Analysis: Barony on Your System

The AMD Ryzen 5 3600 paired with the Intel Arc B390 presents a highly specific performance profile in Barony, a roguelike title from 2015. The recorded data shows a system that is heavily bound by its graphics component, which ranks in the 9th percentile among all GPUs. The CPU, by contrast, is a competent mid-range part from 2019, ranking in the 71st percentile. This dynamic results in a clear delineation of what is playable at each resolution, with the system struggling at 4K but delivering smooth frame rates at 1080p and 1440p.

Measured FPS Breakdown

The benchmark results for Barony reveal a steep performance cliff as resolution increases. At 1920x1080, the system is consistently well above the 60 FPS threshold. The Low preset delivers an average of 159 FPS, which is more than double the playability target. The Medium preset averages 118 FPS, with a recorded minimum of 101 FPS and a maximum of 136 FPS, indicating a stable experience with minimal frame-time variance. High settings yield an average of 102 FPS, while the most demanding Ultra preset still maintains a robust average of 73 FPS. All four presets at this resolution are not only playable but also leave considerable headroom for future driver optimizations or background tasks.

Moving to 2560x1440, the performance drop is substantial but the system remains capable. The Low preset averages 100 FPS, which is excellent for high-refresh-rate monitors. The Medium preset drops to an average of 75 FPS, with a minimum of 64 FPS and a maximum of 86 FPS. This is still comfortably within playable territory, though the minimum frame rate is now closer to the 60 FPS threshold. The High preset averages 64 FPS, which is just above the playability line. The Ultra preset, however, falls to an average of 46 FPS, which is below the 60 FPS target and indicates a noticeable stutter in graphically intense scenes. The data shows that 1440p users should stick to High settings or lower to maintain a locked 60 FPS experience.

At 3840x2160, the system's limitations become pronounced. The Low preset averages 53 FPS, which is below the 60 FPS target but still technically playable for less demanding users. The Medium preset averages 39 FPS, with a minimum of 33 FPS and a maximum of 45 FPS, showing significant frame rate fluctuation. High settings drop to an average of 34 FPS, and the Ultra preset plummets to an average of 24 FPS. None of the 4K presets reach the 60 FPS playability threshold, and the minimum frame rates suggest that even the Low preset will experience visible hitches during gameplay. The data indicates that 4K is not a viable option for this combination in Barony.

FAQ

Q: What is the best preset for 1080p gaming with this system?

A: The Ultra preset is fully playable at 1920x1080, averaging 73 FPS. This is the most demanding preset that stays above the 60 FPS threshold, making it the recommended choice for maximum visual fidelity at this resolution.

Q: Can this system handle 1440p at 60 FPS?

A: Yes, but only with specific settings. The High preset averages 64 FPS, and the Medium preset averages 75 FPS with a minimum of 64 FPS. The Low preset averages 100 FPS. The Ultra preset, however, averages only 46 FPS, so it should be avoided for a consistent 60 FPS experience.

Q: Is 4K gaming possible with the AMD Ryzen 5 3600 and Intel Arc B390?

A: No. At 3840x2160, even the Low preset averages only 53 FPS, which is below the 60 FPS playability threshold. The Medium preset averages 39 FPS, and the Ultra preset averages just 24 FPS. The data shows no 4K preset meets the playability standard.

Q: How does the Intel Arc B390 compare to its closest rivals?

A: The Arc B390 has an average benchmark score of 1482. Its nearest rivals include the NVIDIA GeForce GT 520MX, which scores 1463 and is 1.3% slower, the NVIDIA GeForce 800M at 1460 (1.5% slower), and the NVIDIA GeForce GT 625 OEM at 1446 (2.5% slower). The Arc B390 is also 2.7% faster than the NVIDIA GeForce GT 710, which scores 1443.

Q: How does the AMD Ryzen 5 3600 compare to its nearest rivals?

A: The Ryzen 5 3600 has an average benchmark score of 17035. It is essentially tied with the Intel Core i7-1260P, which scores 17007 and is 0.2% slower. It is 0.2% faster than the Intel Core i5-11400, which scores 17067. The AMD EPYC 7742 scores 16998, making the Ryzen 5 3600 0.2% faster, while the AMD EPYC 7573X scores 17070, making the Ryzen 5 3600 0.2% slower.

Q: What is the frame rate difference between the Low and Ultra presets at 1440p?

A: The Low preset at 2560x1440 averages 100 FPS, while the Ultra preset averages 46 FPS. This represents a 54 FPS drop, or more than a 50% reduction in frame rate, when moving from the least to the most demanding preset.

CPU and GPU Roles

The benchmark data clearly indicates that the Intel Arc B390 is the primary bottleneck in this system for Barony. The GPU ranks in the 9th percentile among all GPUs, while the CPU ranks in the 71st percentile. This disparity is reflected in the frame rate scaling across resolutions. The CPU is a 6-core, 12-thread part with a boost clock of 4.20 GHz, which is more than sufficient for a roguelike title. The GPU, however, has a boost clock of 2500 MHz and 1536 shading units, but its performance is limited by its integrated nature and system-shared memory.

The scaling from 1080p to 1440p shows a significant performance drop that is characteristic of GPU-bound workloads. At 1080p High, the average FPS is 102, while at 1440p High, it drops to 64. This is a 37% reduction in frame rate for a 77% increase in pixel count. If the system were CPU-bound, the frame rate would be more consistent across resolutions. The further drop from 1440p High at 64 FPS to 4K High at 34 FPS confirms this pattern, as the GPU is forced to render four times the pixels of 1080p.

The preset scaling further emphasizes the GPU's role. At 1080p, the difference between Low (159 FPS) and Ultra (73 FPS) is 86 FPS, showing that the GPU is being pushed harder with each graphical enhancement. At 4K, the difference between Low (53 FPS) and Ultra (24 FPS) is 29 FPS, but the absolute numbers are so low that the GPU is clearly overwhelmed. The CPU, with its high single-thread score of 2124 in Cinebench R23, is not the limiting factor in any scenario; it is the GPU's inability to maintain high fill rates at higher resolutions that caps performance.

Similar Performance Alternatives

The recorded data from the database provides a clear picture of what hardware would behave similarly to this pairing. For the GPU, the Intel Arc B390's nearest rivals are all NVIDIA parts from older generations. The NVIDIA GeForce GT 520MX is the closest match, with a performance delta of only 1.3%. The NVIDIA GeForce 800M is 1.5% slower, and the NVIDIA GeForce GT 625 OEM is 2.5% slower. The NVIDIA GeForce GT 710 is 2.7% slower. Users with any of these GPUs should expect nearly identical frame rates in Barony, meaning they would all struggle at 4K but remain playable at 1080p with lower presets.

On the CPU side, the AMD Ryzen 5 3600 has several near-identical alternatives. The Intel Core i7-1260P is 0.2% slower, meaning it would produce virtually the same results in CPU-bound scenarios. The Intel Core i5-11400 is 0.2% faster, and the AMD EPYC 7742 is 0.2% slower. The AMD EPYC 7573X is 0.2% faster. In a game like Barony, where the GPU is the bottleneck, these CPU differences would be imperceptible. Any of these processors paired with a similarly performing GPU would yield the same measured FPS figures.

The combination of a mid-range CPU from the 71st percentile with a GPU from the 9th percentile creates a system where the graphics card dictates all performance outcomes. Users with a faster GPU, even one from the 20th or 30th percentile, would see substantially better results at 1440p and 4K, while those with a slower CPU would not notice a difference given the GPU limitation.

Best Settings per Resolution

For 1920x1080, the Ultra preset is the clear choice. It averages 73 FPS, which is 13 FPS above the 60 FPS playability threshold. This preset provides the highest visual quality while maintaining a comfortable margin for frame rate dips. The Medium preset at 118 FPS and High at 102 FPS are also excellent options for users with high-refresh-rate monitors, but Ultra offers the best balance of fidelity and performance.

For 2560x1440, the High preset is the recommended maximum. It averages 64 FPS, which is just 4 FPS above the 60 FPS target. This leaves little headroom, but the data shows it is playable. The Medium preset at 75 FPS is a safer choice for users who prioritize a locked 60 FPS experience, as it provides a 15 FPS buffer. The Low preset at 100 FPS is best for competitive play or high refresh rates, but for visual quality, High is the upper limit.

For 3840x2160, there is no preset that achieves the 60 FPS target. The Low preset comes closest at 53 FPS, but this is still 7 FPS below the playability threshold. Users attempting 4K will need to accept frame rates in the 30-50 FPS range, which is not ideal for a fast-paced roguelike. The Medium preset at 39 FPS and High at 34 FPS are playable but will feel noticeably less smooth. The Ultra preset at 24 FPS is not recommended for any gameplay scenario.

The Verdict

The data from the database provides a definitive answer: this system can run Barony, but its capabilities are strictly limited by resolution. At 1920x1080, the system excels, with all four presets clearing the 60 FPS threshold. The Ultra preset averages 73 FPS, making it the best choice for a fully smooth experience. At 2560x1440, the system is still viable, with High, Medium, and Low settings all achieving 60 FPS or better. The High preset at 64 FPS is the maximum visual quality option that remains playable.

At 3840x2160, the system fails to meet the 60 FPS standard at any preset. The Low preset averages 53 FPS, which is below the threshold. The recorded verdict for 4K lists no playable settings. This means that while the system is perfectly capable of running Barony at mainstream resolutions, 4K gaming is off the table. The Intel Arc B390, despite its modern architecture and boost clock of 2500 MHz, is simply too weak to drive the pixel count required by 4K. Users with this hardware should target 1080p for the best experience, with 1440p being a viable alternative at reduced settings. The CPU is never the limiting factor, as its performance is more than adequate for this title.