Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
65 FPS
Ultra 1080p Measured
27 FPS

1440p (2K / QHD)

Low 1440p Measured
43 FPS
Ultra 1440p Measured
18 FPS

4K (Ultra HD)

Low 4K Measured
25 FPS
Ultra 4K Measured
10 FPS
25.6ms Frame Time
38ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 84,003
Graphics Card
Required 28,463
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 10 15 22 25
1440p QHD 18 26 39 43
1080p Full HD 27 39 57 65

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 39
1920x1080 Low 65
1920x1080 Medium 57
1920x1080 Ultra 27
2560x1440 High 26
2560x1440 Low 43
2560x1440 Medium 39
2560x1440 Ultra 18
3840x2160 High 15
3840x2160 Low 25
3840x2160 Medium 22
3840x2160 Ultra 10

Performance Analysis: Archeage on Your System

Measured FPS Breakdown

The recorded data for Archeage with the Intel Core Ultra 9 290K Plus and Intel Arc B370 shows a steep performance cliff as resolution climbs. At 1920x1080, the combination delivers playable results only at Low settings, with an average of 65 FPS. Medium settings drop to 57 FPS average, with a minimum of 49 FPS and a maximum of 66 FPS. High settings fall further to 39 FPS average, while Ultra bottoms out at 27 FPS. The gap between Low and Ultra represents a 38 FPS swing, indicating that the integrated graphics solution is heavily taxed by the game’s higher presets.

Moving to 2560x1440, every setting falls below the 60 FPS playability threshold. Low settings produce 43 FPS average, Medium drops to 39 FPS with a minimum of 33 FPS and a maximum of 44 FPS, High manages 26 FPS, and Ultra languishes at 18 FPS. The progression is consistent but the margins shrink, suggesting that resolution scaling affects the Arc B370 more than preset changes at this tier.

At 3840x2160, the results are largely unplayable. Low settings yield 25 FPS average, Medium drops to 22 FPS with a minimum of 19 FPS and a maximum of 25 FPS, High falls to 15 FPS, and Ultra produces a mere 10 FPS. The delta between Low and Ultra at 4K is 15 FPS, a narrower range than at 1080p, which implies that the GPU is already saturated at the lowest preset and additional graphical features provide diminishing returns.

The data shows min and max FPS values only for Medium settings across all resolutions. At 1080p Medium, the range is 49 to 66 FPS, a 17 FPS variance. At 1440p Medium, the range tightens to 33 to 44 FPS, an 11 FPS spread. At 4K Medium, the range is 19 to 25 FPS, just 6 FPS apart. This narrowing variance at higher resolutions suggests frame pacing becomes more consistent as the GPU becomes the limiting factor, but the overall performance remains far from smooth.

Best Settings per Resolution

The playable threshold for this database is defined at 60 FPS. At 1920x1080, the only setting that clears this bar is Low, with an average of 65 FPS. This is the sole playable configuration recorded for this hardware combination. Medium at 1080p falls short at 57 FPS, so despite being close, it does not meet the threshold.

For 2560x1440, no setting achieves 60 FPS. The closest is Low at 43 FPS, which is 17 FPS below the threshold. Medium at 39 FPS, High at 26 FPS, and Ultra at 18 FPS all fall progressively further behind. The best settings field for this resolution is marked as null in the database, indicating that no preset qualifies as playable.

At 3840x2160, the situation is worse. Low produces 25 FPS, Medium 22 FPS, High 15 FPS, and Ultra 10 FPS. None approach the 60 FPS threshold, and the best settings field is again null. The data makes it clear that this combo is only viable at 1080p with the lowest graphical preset, and even then, the margin above 60 FPS is a slim 5 FPS.

CPU and GPU Roles

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor with a boost clock of 5.80 GHz. Its benchmark scores place it in the 96th percentile among all CPUs, with an average benchmark score of 84003. The Intel Arc B370, by contrast, sits in the 5th percentile among GPUs, with an average benchmark score of 1184 from a single 3DMark Steel Nomad DX12 test. This massive gap in percentile rankings explains why the GPU is the dominant constraint in Archeage.

The scaling between resolutions confirms this. From 1080p Low to 1440p Low, the FPS drops from 65 to 43, a 34% reduction. From 1440p Low to 4K Low, it falls from 43 to 25, another 42% drop. These proportional decreases align with the pixel count increases (2.25x from 1080p to 1440p, 2.25x from 1440p to 4K), indicating that the GPU’s fill rate and memory bandwidth are the limiting factors. The CPU’s high single-thread score of 4823 in Passmark does not rescue the frame rate because the GPU cannot keep up with the rendering demands.

Preset scaling also points to GPU dominance. At 1080p, moving from Low to Medium costs 8 FPS, from Medium to High costs 18 FPS, and from High to Ultra costs 12 FPS. The steepest drop occurs between Medium and High, suggesting that specific graphical features at that tier heavily impact the Arc B370’s limited shader throughput of 1280 shading units. At 4K, the same preset ladder shows smaller absolute drops (3 FPS from Low to Medium, 7 FPS from Medium to High, 5 FPS from High to Ultra), which implies the GPU is already near its ceiling regardless of settings.

The CPU’s role is more evident at lower resolutions where the GPU has less work per frame. At 1080p Low, the 65 FPS average likely allows the CPU to feed frames adequately, but the 24-core processor’s multithreaded score of 60860 in Passmark does not translate into higher FPS because the game’s engine, released in 2014, does not scale well with modern core counts. The data suggests that even a weaker CPU paired with this GPU would produce similar results, as the bottleneck is overwhelmingly on the graphics side.

Similar Performance Alternatives

For the CPU, the nearest rivals in the database provide context for how this processor compares. The Intel Core Ultra 9 285K has an average score of 83807, a 0.2% delta from the 290K Plus’s 84003. The AMD EPYC 4584PX scores 83090, a 1.1% delta, and the AMD EPYC 9135 scores 82980, a 1.2% delta. On the higher side, the AMD EPYC 7F72 scores 85072, a -1.3% delta. These differences are minimal, meaning any of these CPUs would perform nearly identically in Archeage when paired with the Arc B370, since the GPU is the limiting factor.

For the GPU, the nearest rivals are far more telling. The ATI Mobility Radeon HD 5570 scores 1186, a -0.2% delta from the Arc B370’s 1184. The ATI Radeon HD 5770 scores 1190, a -0.5% delta, and the AMD Radeon HD 7650M scores 1192, a -0.7% delta. The AMD FirePro M2000 scores 1168, a 1.4% delta. These are all legacy or low-end parts from over a decade ago, which underscores how underpowered the Arc B370 is for gaming. In practical terms, swapping the Arc B370 for any of these alternatives would yield nearly identical frame rates in Archeage, all of which would fail to hit 60 FPS at 1440p or 4K.

The implication is clear: the CPU choice is irrelevant for this game’s performance, as the GPU’s 5th percentile ranking dominates the outcome. Any of the rival CPUs listed would produce the same measured FPS values, and any of the rival GPUs would produce similar sub-60 results at all but 1080p Low.

FAQ

Q: Can this combo run Archeage at 60 FPS on 1080p?

A: Yes, but only at Low settings, where the average FPS is 65. Medium settings fall to 57 FPS, which is below the 60 FPS threshold.

Q: What is the best playable setting at 1440p?

A: There is no playable setting at 2560x1440. The highest average FPS is 43 at Low, and all other presets score lower, so none meet the 60 FPS requirement.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core Ultra 9 290K Plus has an average benchmark score of 84003, which is 0.2% higher than the Intel Core Ultra 9 285K, 1.1% higher than the AMD EPYC 4584PX, and 1.2% higher than the AMD EPYC 9135. It trails the AMD EPYC 7F72 by 1.3%.

Q: What GPU performance class does the Arc B370 belong to?

A: The Arc B370 has an average benchmark score of 1184, placing it in the 5th percentile of all GPUs. Its nearest rivals include the ATI Mobility Radeon HD 5570, ATI Radeon HD 5770, and AMD Radeon HD 7650M, all with scores within 1% of the Arc B370.

Q: Why does the FPS drop so much from 1080p to 1440p?

A: The drop reflects the GPU’s limited capabilities. At 1080p Low, the average is 65 FPS, but at 1440p Low it falls to 43 FPS, a 34% reduction that aligns with the increased pixel count. The GPU’s 1280 shading units and system-shared memory cannot handle the higher resolution efficiently.

Q: Is the CPU or GPU more important for this game?

A: The GPU is overwhelmingly the limiting factor. The CPU ranks in the 96th percentile, while the GPU ranks in the 5th percentile. Resolution and preset scaling both show GPU-bound behavior, as the FPS drops proportionally with pixel count and the CPU’s high scores do not improve frame rates.

How This Combo Ranks

The database ranks this combination at 3423 out of 3708 tested combos for Archeage. This places it in the bottom 8% of all configurations, which is consistent with the GPU’s low percentile ranking. The CPU’s strong performance does not boost the combo because the game’s frame rate is capped by the Arc B370’s output.

The rank implies that most other hardware combinations, including those with older or more modest CPUs but dedicated GPUs, would outperform this setup. The Arc B370 is an integrated graphics solution with a 25 W TDP and no dedicated memory, relying on system-shared memory with bandwidth described as system dependent. This architecture is simply not suited for a game like Archeage, which, despite its 2014 release, still demands more GPU throughput than this chip can provide.

For context, the combo’s rank of 3423 means only 285 combinations perform worse. This is a niche outcome, driven by the unusual pairing of a top-tier 24-core CPU with a bottom-tier integrated GPU. The data suggests that any discrete GPU from the last decade would likely rank higher, as the nearest GPU rivals all score within 1% of the Arc B370, and those are also low-end parts.

The Verdict

The question of whether this PC can run Archeage has a narrow answer: yes, but only under specific conditions. The verdictByResolution data shows that at 1920x1080, the Low preset is playable with an average of 65 FPS, clearing the 60 FPS threshold by 5 FPS. This is the only configuration that meets the playability bar.

At 2560x1440, no settings are playable. The best case is Low at 43 FPS, which falls 17 FPS short of the threshold. At 3840x2160, the situation is worse, with Low at 25 FPS and Ultra at 10 FPS, both far below playable levels.

The practical takeaway is that this combo is only suitable for 1080p gaming with the lowest graphical preset. The 24-core CPU is overkill for this workload, while the Arc B370’s integrated nature makes it unsuitable for higher resolutions or more demanding settings. Players seeking to run Archeage at 1440p or 4K would need a different GPU, as the current configuration cannot deliver acceptable frame rates beyond 1080p Low. The 5 FPS margin at 1080p Low also leaves little headroom for demanding scenes or large player gatherings common in MMORPGs, so even the single playable setting may not hold consistently in heavy combat or crowded cities.