Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Archeage
MMORPG 2014

Archeage

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
71 FPS
Ultra 1080p Measured
29 FPS

1440p (2K / QHD)

Low 1440p Measured
48 FPS
Ultra 1440p Measured
20 FPS

4K (Ultra HD)

Low 4K Measured
28 FPS
Ultra 4K Measured
11 FPS
23.3ms Frame Time
35ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,415
Your CPU 64,640
Graphics Card
Required 28,463
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 11 17 25 28
1440p QHD 20 29 43 48
1080p Full HD 29 43 64 71

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 43
1920x1080 Low 71
1920x1080 Medium 64
1920x1080 Ultra 29
2560x1440 High 29
2560x1440 Low 48
2560x1440 Medium 43
2560x1440 Ultra 20
3840x2160 High 17
3840x2160 Low 28
3840x2160 Medium 25
3840x2160 Ultra 11

Performance Analysis: Archeage on Your System

The recorded data for Archeage on the Intel Core Ultra 7 265 and Intel Arc B390 combination shows a system that is heavily constrained by graphics performance. This MMORPG, originally released in 2014, demonstrates a stark contrast between the processor's high computing capacity and the integrated graphics solution. The measurements indicate that playable frame rates are only achievable at 1080p with reduced settings.

Measured FPS Breakdown

At 3840x2160, the resolution scaling is severe. At Low settings, the average frame rate is 28 FPS, which is the highest recorded at this resolution. Medium settings produce an average of 25 FPS, with a minimum of 21 FPS and a maximum of 28 FPS. High settings drop to an average of 17 FPS, while the Ultra preset bottoms out at an average of 11 FPS. None of these results approach the 60 FPS playable threshold; the Ultra preset at 4K is nearly a slideshow, and even the Low preset falls far short of acceptable performance.

At 2560x1440, the situation improves but remains below playable. The Low preset yields an average of 48 FPS. Medium settings deliver an average of 43 FPS, with a minimum of 36 FPS and a maximum of 49 FPS. High settings average 29 FPS, and Ultra settings average 20 FPS. The gap between Medium at 1440p and the playable threshold is significant, as even the best average recorded at 48 FPS leaves a 12 FPS gap to reach 60 FPS.

The 1920x1080 results are the only ones where playable frame rates are found. At Low settings, the average FPS is 71 FPS, which is the highest recorded in the entire dataset. Medium settings average 64 FPS, with a minimum of 54 FPS and a maximum of 73 FPS. High settings average 43 FPS, and Ultra settings average 29 FPS. At 1080p, the Medium preset is the most demanding setting that stays above the 60 FPS threshold, while the Low preset is the only setting with a larger margin of headroom.

The scaling between resolutions shows the GPU is the limiting factor. Moving from 1080p Low at 71 FPS down to 1080p Medium at 64 FPS, the drop is 7 FPS, while 1440p Low at 48 FPS is a further 16 FPS reduction. The 4K results are consistently below 30 FPS, confirming that higher pixel counts overwhelm the Arc B390 at all settings.

Best Settings per Resolution

At 3840x2160, no preset reaches the 60 FPS playable threshold. The best average FPS recorded at 4K is 28 FPS on Low settings, but this is not playable per the verdict data. The database classifies no settings as playable at this resolution, so the recommendation is to avoid 4K with this hardware.

At 2560x1440, the situation is identical in classification: no settings are playable. The Low preset achieves 48 FPS, which is the best average at this resolution, but it still falls short of the 60 FPS threshold by 12 FPS. Medium settings at 43 FPS and High at 29 FPS are progressively worse, and Ultra at 20 FPS is not viable.

At 1920x1080, the playable settings are Low and Medium. The best setting that stays at or above 60 FPS is Medium, with an average of 64 FPS. The Low preset is actually faster at 71 FPS, but since Medium still clears the threshold, it is the recommended preset for the highest quality that remains playable. The Ultra setting at 29 FPS and High at 43 FPS are below the threshold.

FAQ

Q: Can this system run Archeage at 4K resolution?

A: No. At 3840x2160, the best average FPS is 28 FPS on Low settings, and no settings are classified as playable. Medium averages 25 FPS, High averages 17 FPS, and Ultra averages 11 FPS.

Q: What is the highest playable preset at 2560x1440?

A: No preset is playable at 2560x1440. The best average FPS is 48 FPS on Low settings, which is below the 60 FPS playable threshold.

Q: What settings should be used at 1920x1080 for the best visual quality while staying playable?

A: Medium settings, which average 64 FPS, represent the most demanding preset that stays at or above 60 FPS. The minimum recorded at Medium is 54 FPS and the maximum is 73 FPS.

Q: How does the Ultra preset compare to Low at 1080p?

A: At 1920x1080, the Low preset averages 71 FPS, which is 42 FPS higher than the Ultra preset at 29 FPS. Ultra is not playable at any resolution.

Q: Is the Intel Arc B390 a discrete graphics card?

A: No, the Intel Arc B390 is an integrated graphics processor (IGP) with a slot width listed as IGP and no power connectors. It uses system shared memory and has a TDP of 80 W.

Q: What frame rate does the Medium preset have at 1440p?

A: At 2560x1440, Medium settings average 43 FPS, with a minimum of 36 FPS and a maximum of 49 FPS. This is below the playable threshold.

The Verdict

The question of whether this PC can run Archeage depends entirely on resolution. The verdict data is clear: at 3840x2160, there are no playable settings; the best average FPS is 28 FPS at Low, and all other presets are lower. At 2560x1440, the same classification applies, with no playable settings and a best average of 48 FPS at Low. Only at 1920x1080 does the system clear the 60 FPS threshold, with Low and Medium settings classified as playable. The best setting at 1080p is Medium, averaging 64 FPS.

At 1080p Medium, this system is playable for Archeage, but with a narrow margin. The minimum recorded FPS at Medium is 54 FPS, which dips below 60 FPS but the average holds at 64 FPS. The Low preset at 71 FPS provides more headroom, but Medium is the highest quality option that still meets the playable threshold. For users who prioritize smoothness, Low at 1080p is the safer choice. For higher resolutions, the data shows this hardware is not suitable, as all presets fall below the 60 FPS threshold.

CPU and GPU Roles

The CPU and GPU roles in Archeage are asymmetric. The Intel Core Ultra 7 265 is a 20-core, 20-thread processor with a 5.30 GHz boost clock and a Cinebench R23 multi-core score of 42216 points. The Intel Arc B390 is an integrated GPU with a 3DMark Steel Nomad DX12 score of 1482 points, placing it in the 9th percentile of all GPUs. The CPU is far more capable than the GPU, and the frame rate data reflects this.

The scaling between resolutions demonstrates the GPU bottleneck. At 1080p Low, the average FPS is 71 FPS. At 1440p Low, it drops to 48 FPS, a 32% reduction. At 4K Low, it falls to 28 FPS, another 42% reduction. This pattern is consistent across all presets: resolution scaling has a massive impact on FPS, which is a classic sign of a GPU-limited system. The CPU has enough headroom to feed the GPU at lower resolutions, but the GPU cannot maintain frame rates as pixel count increases.

The preset scaling also supports this. At 1080p, the difference between Low (71 FPS) and Ultra (29 FPS) is 42 FPS, showing that graphics settings heavily influence performance. At 4K, the difference between Low (28 FPS) and Ultra (11 FPS) is 17 FPS, a smaller absolute gap but still significant. The CPU's role is to provide the minimum frame rate floor, and its high multi-core score ensures that the processor is not the limiting factor in this game. At 1080p Medium, the minimum FPS of 54 FPS suggests occasional CPU-driven dips, but the overall bottleneck remains the GPU.

How This Combo Ranks

The Intel Core Ultra 7 265 and Intel Arc B390 combination ranks 3297 out of 3708 tested combos in Archeage. This places it in the bottom 11% of all tested systems. The rank reflects the integrated GPU's limited performance; the CPU is in the 93rd percentile of all CPUs, but the GPU is in the 9th percentile, and the combination's overall ranking is dragged down by the graphics bottleneck.

The rank is consistent with the measured FPS data. A combo in the 3297th position out of 3708 would be expected to struggle at higher resolutions, and the data confirms this. The system can handle 1080p at Low and Medium, but it falls behind the majority of tested configurations in this game. The high CPU percentile does not rescue the overall ranking, as Archeage's performance in these measurements is tied closely to the GPU's capabilities.

Similar Performance Alternatives

The nearest rivals for the Intel Core Ultra 7 265 are all server-class processors. The AMD EPYC 4464P has an average score of 64823, which is 0.3% higher than the Core Ultra 7 265's 64640 average. The Intel Core Ultra 7 265F scores 64438, a 0.3% difference. The AMD EPYC 7343 scores 64202, a 0.7% difference, and the AMD EPYC 9124 scores 65104, a 0.7% difference. These processors would behave similarly in CPU-bound scenarios, but none of them change the GPU-limited nature of this system.

For the GPU, the nearest rivals are older NVIDIA integrated and entry-level parts. The NVIDIA GeForce GT 520MX scores 1463, which is 1.3% lower than the Arc B390's 1482. The NVIDIA GeForce 800M scores 1460, a 1.5% difference. The NVIDIA GeForce GT 625 OEM scores 1446, a 2.5% difference, and the NVIDIA GeForce GT 710 scores 1443, a 2.7% difference. These GPUs would produce similar frame rates in Archeage, meaning that swapping the Arc B390 for any of these parts would not meaningfully change the playability picture. The results indicate that Archeage at playable settings requires either a lower resolution than 1080p or a significantly more powerful discrete GPU.