Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 17 | 26 | 38 | 42 |
| 1440p QHD | 31 | 45 | 66 | 74 |
| 1080p Full HD | 45 | 66 | 98 | 110 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
The Intel Core i9-14900K paired with the Intel Arc B570 presents a curious case for running Archeage. The CPU is a top-tier performer, sitting in the 95th percentile of all processors, while the GPU is a mid-range option in the 65th percentile. Benchmark results show that this combination’s performance is heavily dictated by the graphics card, particularly at higher resolutions. The data indicates a playable experience is achievable at 1080p and 1440p, but the system falls short of the 60 FPS threshold at 4K across all tested presets.
Measured FPS Breakdown
The measured frame rates reveal a clear performance hierarchy across resolutions and settings. At 1920x1080, the system delivers its strongest results. With Low settings, the average frame rate reaches 110 FPS. Moving to Medium settings, the average drops to 98 FPS, with a minimum of 83 FPS and a maximum of 112 FPS. High settings still clear the 60 FPS bar comfortably with an average of 66 FPS. The Ultra preset, however, sees a significant decline to an average of 45 FPS, which falls below the playable threshold.
At 2560x1440, the performance scaling is linear and consistent. The Low preset produces an average of 74 FPS. Medium settings average 66 FPS, with a minimum of 56 FPS and a maximum of 76 FPS, indicating some frame dips below 60 FPS but an overall playable experience. High settings drop to an average of 45 FPS, and the Ultra preset averages only 31 FPS. Neither High nor Ultra at this resolution meets the 60 FPS requirement.
The 3840x2160 results show the GPU struggling under load. At Low settings, the average is 42 FPS. Medium settings yield an average of 38 FPS, with a minimum of 32 FPS and a maximum of 43 FPS. High settings average 26 FPS, while Ultra drops to a mere 17 FPS. None of these presets come close to the 60 FPS target, making 4K unplayable with this hardware configuration. The frame time data shows a consistent pattern: the gap between Low and Ultra settings widens as resolution increases, pointing to a clear GPU bottleneck.
Similar Performance Alternatives
The benchmark data provides context by comparing the Intel Arc B570 to other GPUs with similar average scores. The NVIDIA GeForce RTX 3070 Mobile has an average score that is 0.1% higher than the Arc B570, indicating near-identical performance in synthetic benchmarks. The Intel Arc A750 is essentially a match, with a score 0.1% lower. The NVIDIA Quadro M4000M is 0.4% higher, and the AMD Radeon R9 M390X is 0.5% lower. These deltas are all within a fraction of a percent, meaning any of these GPUs would deliver nearly the same frame rates in Archeage at the same settings and resolutions.
On the CPU side, the Intel Core i9-14900K is closely matched by several rivals. The Intel Core i9-14900KF has an average score 0.3% lower, making it a direct equivalent. The Intel Core Ultra 9 290HX Plus is 0.6% lower, and the AMD EPYC 7413 is 1.2% lower. The AMD Ryzen AI Max+ 395 is 1.7% higher. These small percentage differences translate to negligible real-world performance gaps in gaming. For Archeage specifically, the CPU is unlikely to be the limiting factor at any resolution, so swapping the i9-14900K for any of these alternatives would produce nearly identical FPS numbers.
CPU and GPU Roles
The benchmark data clearly shows that the Intel Arc B570 is the performance bottleneck in this pairing. The CPU’s immense multithreaded capability, evidenced by a Cinebench R23 multicore score of 39399.5, is far beyond what Archeage requires. The game’s engine, released in 2014, is unlikely to leverage more than a few cores effectively. The GPU, however, shows a dramatic scaling drop as resolution increases.
Comparing the FPS at 1920x1080 and 3840x2160 at the same settings illustrates this point. At High settings, the average FPS drops from 66 at 1080p to 26 at 4K, a reduction of approximately 61%. At Low settings, the drop is from 110 to 42 FPS, a reduction of about 62%. This consistent halving of performance when pixel count quadruples indicates a GPU-bound scenario. The CPU’s role is static; it prepares frames well ahead of the GPU’s ability to render them.
The difference between presets also underscores the GPU’s dominance. At 1080p, moving from Low to Ultra costs 65 FPS (from 110 to 45). At 1440p, the same preset change costs 43 FPS (from 74 to 31). At 4K, the cost is 25 FPS (from 42 to 17). The absolute FPS loss shrinks at higher resolutions because the GPU is already saturated, but the relative performance hit remains similar. The CPU, with a Passmark single-thread score of 4697, never appears to be the constraint. The data suggests that at 1080p Medium, the system is near the edge of CPU and GPU balance, but at 1440p and 4K, the GPU is unequivocally the limiting factor.
The Verdict
This PC configuration can run Archeage, but only at specific resolutions and settings. According to the verdict data, the system clears the 60 FPS threshold at 1920x1080 with High, Medium, and Low presets. The best playable setting at 1080p is High, which averages 66 FPS. At 2560x1440, the playable settings are limited to Low and Medium, with Medium being the best option at an average of 66 FPS. The 1440p Medium preset does have a reported minimum of 56 FPS, so there will be occasional dips below 60 FPS, but the average remains above the threshold.
The system cannot achieve 60 FPS at 3840x2160 at any setting. The best result at 4K is 42 FPS on Low, which is well below the playable threshold. The verdict data confirms this, listing no playable settings for 4K. For a smooth experience, users should stick to 1080p or 1440p. The 1080p High preset offers a strong balance of visual quality and frame rate, while 1440p Medium is the highest quality option that maintains an average above 60 FPS.
Best Settings per Resolution
For each resolution, the most demanding preset that stays at or above 60 FPS is as follows. At 1920x1080, the best settings are High, which delivers an average of 66 FPS. This provides a significant visual upgrade over Medium (98 FPS) and Low (110 FPS) while still maintaining a comfortable margin above the 60 FPS target. At 2560x1440, the best settings are Medium, with an average of 66 FPS. The minimum of 56 FPS indicates some frame stuttering, but the overall experience is playable. Low settings at 1440p average 74 FPS, but Medium offers better visual fidelity at the cost of a slightly lower average.
At 3840x2160, there is no preset that meets the 60 FPS requirement. The highest average is 42 FPS on Low, which is not playable according to the benchmark standard. Users attempting 4K would need to accept a sub-60 FPS experience or lower the resolution. The data shows that the jump from 1440p to 4K is too demanding for the Arc B570, and no settings adjustment can bridge that gap.
How This Combo Ranks
In the database of tested hardware combinations for Archeage, this specific pairing of the Intel Core i9-14900K and Intel Arc B570 ranks 2983 out of 3708 total combos. This places it in the lower half of all tested systems, despite the high-end CPU. The rank is primarily dragged down by the GPU’s mid-range performance. The combination ranks in the 19.5th percentile of all tested combos, meaning roughly 80% of systems tested perform better in this game.
This ranking is consistent with the measured FPS data. The system is capable of 60 FPS at 1080p High and 1440p Medium, but many other GPU and CPU pairings would achieve higher frame rates or enable 4K playability. The i9-14900K’s strong synthetic benchmarks do not translate into a high game-specific rank because Archeage is not a CPU-intensive title. The GPU is the determining factor for the overall ranking, and the Arc B570’s 65th percentile standing among all GPUs limits this combo to a below-average position.
FAQ
Q: Can this PC run Archeage at 60 FPS on a 1080p monitor?
A: Yes. The benchmark data shows average frame rates of 66 FPS at High settings, 98 FPS at Medium, and 110 FPS at Low for 1920x1080 resolution.
Q: What is the best setting for 1440p gaming with this hardware?
A: Medium settings at 2560x1440 provide an average of 66 FPS, which is the most demanding preset that stays above the 60 FPS threshold. Low settings average 74 FPS but offer reduced visual quality.
Q: Is 4K gaming possible with the Intel Core i9-14900K and Intel Arc B570?
A: No. The highest average frame rate at 3840x2160 is 42 FPS on Low settings. High and Ultra presets average 26 and 17 FPS, respectively. No 4K preset reaches 60 FPS.
Q: How does the Intel Arc B570 compare to the Intel Arc A750 in this game?
A: The two GPUs have nearly identical average benchmark scores, with the Arc B570 being 0.1% lower than the Arc A750. This indicates comparable performance in Archeage at the same settings and resolution.
Q: Is the Intel Core i9-14900K the bottleneck in this system?
A: No. The data indicates the GPU is the limiting factor. The CPU has a Passmark multithread score of 58674 and a single-thread score of 4697, which far exceeds the demands of this 2014 MMORPG. The FPS scaling between resolutions points directly to GPU saturation.
Q: What is the playable frame rate threshold for this analysis?
A: The playable threshold is defined as 60 FPS. The verdict data uses this value to determine which resolutions and settings are considered playable.