Instant compatibility check with FPS benchmarks and optimization tips
Archeage
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 63 | 92 | 104 |
| 1440p QHD | 75 | 110 | 161 | 181 |
| 1080p Full HD | 111 | 163 | 240 | 269 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Archeage on Your System
Archeage, a 2014 MMORPG, runs exceptionally well on the Intel Core i7-14700KF and NVIDIA GeForce RTX 4080 combination. The measured data shows that this system provides a high-refresh-rate experience at 1080p and 1440p, while still maintaining playable frame rates at 4K on higher presets. This analysis breaks down the performance across all tested resolutions and settings, compares it to similar hardware, and clarifies the role each component plays.
Measured FPS Breakdown
The performance data for this CPU/GPU pair in Archeage is measured across three resolutions and four graphical presets. The results are consistent and show a clear scaling pattern as resolution and settings increase.
At 1920x1080, the system is overwhelmingly powerful for this title. With Low settings, the average frame rate hits 269 FPS. Moving to Medium settings, the average is 240 FPS, with a minimum of 204 FPS and a maximum of 276 FPS. At High settings, the average drops to 163 FPS. Even at the most demanding Ultra preset, the system maintains an average of 111 FPS. This indicates that at 1080p, the system is never strained, and the frame rates are limited more by the game's engine or CPU than the GPU.
At 2560x1440, performance remains very high. The Low preset averages 181 FPS. The Medium preset sees an average of 161 FPS, with a minimum of 137 FPS and a maximum of 186 FPS. The High preset delivers an average of 110 FPS. The Ultra preset, while more demanding, still yields a solid 75 FPS average. The scaling from 1080p to 1440p shows a predictable performance cost, but the frame rates remain well above the 60 FPS playability threshold.
At 3840x2160 (4K), the demands on the GPU become significant. The Low preset averages 104 FPS, showing the GPU's raw strength. The Medium preset averages 92 FPS, with a minimum of 79 FPS and a maximum of 106 FPS. The High preset is the most demanding playable option, with an average of 63 FPS. The Ultra preset, however, proves too demanding for a smooth experience, with the average falling to 43 FPS. This data shows a clear performance cliff at 4K when moving from High to Ultra settings.
Similar Performance Alternatives
The benchmark data places this specific hardware configuration in a distinct performance tier. The CPU and GPU each have close rivals that would produce similar frame rates in Archeage.
For the Intel Core i7-14700KF, the nearest rivals based on average benchmark scores are all within a very tight margin. The AMD Ryzen 7 9700F is a near-exact match, with a score 0.2% lower. The AMD Ryzen 9 7940HX is 0.4% slower, and the AMD Ryzen 9 7950X is 0.9% slower. The Intel Core Ultra 7 265K is actually 1% faster in these aggregate benchmarks. In a game like Archeage, which is not heavily multi-threaded, any of these CPUs would likely deliver nearly identical performance, meaning the choice between them would come down to platform features or price, not gaming frame rates.
For the NVIDIA GeForce RTX 4080, the closest competitor is the NVIDIA GeForce RTX 4080 SUPER, which has an average score only 0.1% higher. This suggests that in real-world gaming, the two cards would be functionally identical. The other listed rivals, such as the AMD Radeon Pro W5700X and AMD Radeon RX 6750 GRE 12 GB, show larger performance gaps. The Radeon Pro W5700X is 1.1% faster, and the RX 6750 GRE is 2.6% faster in these synthetic tests. However, these differences are small enough that the gaming experience in Archeage would be very similar, with any of these cards providing a smooth experience at high settings.
CPU and GPU Roles
The data reveals a clear shift in system bottleneck depending on the resolution. At 1920x1080, the CPU plays a more significant role. The frame rates at Low (269 FPS) and Medium (240 FPS) are extremely high, suggesting that the CPU is the limiting factor, as the GPU is not being fully utilized at these lower settings. The drop from Medium to High (163 FPS) and then to Ultra (111 FPS) shows the GPU beginning to take on more work as the graphical load increases.
At 2560x1440, the balance shifts towards the GPU. The frame rates are still high, but the scaling is more consistent with what you would expect from GPU-bound performance. The difference between Low (181 FPS) and Medium (161 FPS) is smaller than at 1080p, and the drop to High (110 FPS) and Ultra (75 FPS) is more pronounced. This indicates that the GPU is becoming the primary performance driver.
At 3840x2160, the GPU is clearly the dominant factor. The massive drop from Medium (92 FPS) to High (63 FPS) and then to Ultra (43 FPS) highlights the intense computational load at 4K. The CPU's role becomes less critical as the GPU struggles to keep up with the pixel count and shader complexity. The data shows that for this game, the RTX 4080's 16 GB of VRAM and 716.8 GB/s of bandwidth are sufficient for all but the most extreme 4K preset.
The Verdict
This system can absolutely run Archeage. The benchmark data confirms that it clears the 60 FPS playability threshold at all resolutions on multiple presets. The `verdictByResolution` data explicitly lists which settings are playable.
- 3840x2160: The system can run the game at High, Medium, and Low settings, all averaging above 60 FPS. The High preset is the best playable option, with an average of 63 FPS. The Ultra preset is not playable, averaging 43 FPS.
- 2560x1440: All four presets are playable, including the most demanding Ultra preset, which averages 75 FPS. This makes 1440p the sweet spot for this hardware, offering a great balance of visual fidelity and high frame rates.
- 1920x1080: All presets are playable, with even the Ultra preset achieving an average of 111 FPS. This resolution is ideal for high-refresh-rate monitors, as the system can push well beyond 144 FPS on most settings.
Best Settings per Resolution
The optimal settings for this hardware are determined by the most demanding preset that still maintains an average of at least 60 FPS.
- 1920x1080: The best settings are Ultra, delivering an average of 111 FPS. This provides the maximum visual quality while still offering a frame rate that is more than double the 60 FPS threshold.
- 2560x1440: The best settings are Ultra, with an average of 75 FPS. This allows for the highest fidelity at 1440p while keeping gameplay smooth and responsive.
- 3840x2160: The best settings are High, which achieves an average of 63 FPS. While the step up to Ultra is not possible without dropping below 60 FPS, High still provides a very good visual experience at 4K.
FAQ
Q: Can this PC run Archeage at 4K with maximum settings?
A: No. At 3840x2160 with Ultra settings, the system averages 43 FPS, which is below the 60 FPS playability threshold. The High preset is the best playable option at 4K.
Q: What is the best resolution to play this game for high refresh rates?
A: At 1920x1080, the system can achieve very high frame rates, with the Low preset averaging 269 FPS and Ultra averaging 111 FPS. This is ideal for monitors with refresh rates of 144Hz or higher.
Q: How does the RTX 4080 compare to the RTX 4080 SUPER in this setup?
A: The RTX 4080 SUPER has an average benchmark score only 0.1% higher than the RTX 4080. In practical terms, the gaming performance in Archeage would be indistinguishable between the two cards.
Q: Is the CPU a bottleneck at 1440p?
A: The data suggests the system is more GPU-bound at 2560x1440. The frame rates are very high, but the scaling from Medium to High to Ultra is more pronounced than at 1080p, indicating the GPU is the primary performance driver.
Q: What is the expected frame rate at 1080p with Medium settings?
A: The benchmark shows an average of 240 FPS with a minimum of 204 FPS and a maximum of 276 FPS. This is an excellent result for smooth, high-refresh-rate gameplay.
Q: Is the Ultra preset playable at 1440p?
A: Yes. At 2560x1440, the Ultra preset averages 75 FPS, which is comfortably above the 60 FPS playable threshold. This makes 1440p the best resolution for maximizing visual quality while maintaining a high frame rate.