Archeage

The Intel Core i7-14700KF paired with the Intel Arc B570 delivers a strictly limited experience in Archeage, with playability confined to lower resolutions and presets. Benchmark data shows this combination cannot maintain a stable 60 FPS at 4K under any setting, while 1440p and 1080p offer viable but constrained options. At 3840x2160, the average frame rates are 26 FPS on High, 42 FPS on Low, 38 FPS on Medium, and 17 FPS on Ultra, all well below the 60 FPS playability threshold. The picture improves at 2560x1440, where Low settings yield 74 FPS and Medium produces 66 FPS, but High drops to 45 FPS and Ultra to 31 FPS. At 1920x1080, the combo manages 110 FPS on Low, 98 FPS on Medium, and 66 FPS on High, while Ultra falls to 45 FPS.

Measured FPS Breakdown

The measured FPS data for this CPU-GPU combination reveals a clear pattern of performance degradation as resolution and settings increase. At 3840x2160, the best result is 42 FPS on Low settings, but this still misses the 60 FPS target. Medium settings at 4K deliver 38 FPS average with a minimum of 32 FPS and a maximum of 43 FPS, indicating noticeable frame dips during busy scenes. High settings drop to 26 FPS, and Ultra is effectively unplayable at 17 FPS. None of these 4K configurations come close to the playable threshold.

Moving to 2560x1440, the data shows a meaningful improvement. Low settings produce 74 FPS, comfortably above 60 FPS. Medium settings achieve 66 FPS average, with a 56 FPS minimum and 76 FPS maximum, meaning the frame rate occasionally dips below the threshold but generally holds up. High settings at 45 FPS and Ultra at 31 FPS are both below playable levels, confirming that 1440p is only viable for Low or Medium presets.

At 1920x1080, the combo performs best. Low settings reach 110 FPS, Medium hits 98 FPS with an 83 FPS minimum and 112 FPS maximum, and High manages 66 FPS. Ultra again falls short at 45 FPS. The 1080p Medium preset shows the largest headroom, with an average nearly 40 FPS above the 60 FPS threshold. The High preset at 1080p is the most demanding playable option, sitting at exactly 66 FPS average.

Similar Performance Alternatives

The nearest rivals for the Intel Core i7-14700KF indicate that its compute performance is closely matched by several other processors. The AMD Ryzen 7 9700F has an average benchmark score of 69996, which is 0.2 percent higher than the i7-14700KF’s 70163 average. The AMD Ryzen 9 7940HX scores 69875, a 0.4 percent difference, and the AMD Ryzen 9 7950X scores 69515, 0.9 percent lower. The Intel Core Ultra 7 265K scores 70879, which is 1 percent higher than the i7-14700KF. In gaming scenarios for Archeage, these CPUs would deliver nearly identical frame rates, meaning any of these alternatives would behave similarly in terms of CPU-bound performance.

For the GPU side, the Intel Arc B570’s average benchmark score of 20556 is closely bracketed by its nearest rivals. The NVIDIA GeForce RTX 3070 Mobile scores 20534, a 0.1 percent difference, while the Intel Arc A750 scores 20582, also 0.1 percent apart. The NVIDIA Quadro M4000M scores 20480, 0.4 percent lower, and the AMD Radeon R9 M390X scores 20662, 0.5 percent higher. These GPUs would produce nearly identical frame rates in Archeage at the same settings, so users with any of these cards paired with a comparable CPU should expect similar measured FPS numbers to those listed for the Arc B570.

Best Settings per Resolution

At 3840x2160, no setting achieves the 60 FPS playability threshold, so there is no recommended preset. The closest option is Low at 42 FPS, but this falls short of the target.

At 2560x1440, the best playable setting is Medium, which delivers 66 FPS average. This preset provides the highest quality that stays at or above 60 FPS, with a recorded minimum of 56 FPS and maximum of 76 FPS. Low settings also clear the threshold at 74 FPS but offer reduced visual fidelity.

At 1920x1080, the best playable setting is High, achieving 66 FPS average. This is the most demanding preset that meets the 60 FPS requirement, and it matches the 1440p Medium result in average frame rate. Low and Medium settings also exceed 60 FPS at 110 FPS and 98 FPS respectively, but High offers the best visual quality among playable options.

The Verdict

The data indicates that this PC can run Archeage, but only under specific conditions. At 3840x2160, the verdict is clear: no settings are playable, as every preset falls below 60 FPS, with the best being Low at 42 FPS. At 2560x1440, the system is playable on Low and Medium settings, with Medium being the highest quality option at 66 FPS average. At 1920x1080, the system is playable on High, Low, and Medium settings, with High being the best visual preset at 66 FPS average.

For users targeting 60 FPS, the practical ceiling is 1440p Medium or 1080p High, both delivering exactly 66 FPS average. The Ultra preset is not playable at any resolution, with frame rates ranging from 17 FPS at 4K to 45 FPS at 1080p. The 1080p Medium setting offers the most comfortable margin above the threshold, with an average of 98 FPS, while the 1440p Medium and 1080p High both sit narrowly above 60 FPS and may dip below during intense scenes.

CPU and GPU Roles

The scaling between resolutions and presets reveals how the CPU and GPU contribute differently across settings. At 3840x2160, the GPU is clearly the limiting factor. The Arc B570’s 10 GB of GDDR6 memory and 380.0 GB/s bandwidth are insufficient for the pixel workload at 4K, as evidenced by the steep drop from 42 FPS on Low to 26 FPS on High, a 38 percent reduction. The CPU’s strong multi-threaded performance, with a Cinebench R23 multi-core score of 44167, does not compensate for the GPU bottleneck at this resolution.

At 2560x1440, the balance shifts. The 45 FPS result on High versus 66 FPS on Medium shows that the GPU still dominates, but the CPU begins to matter more as the resolution drops. The 31 FPS on Ultra indicates that the combination of higher draw calls and increased shading work overwhelms the GPU. The i7-14700KF’s high single-thread performance, with a Geekbench single-core score of 2578, helps maintain frame rates in CPU-bound moments, but the Arc B570’s 11.52 TFLOPS FP32 throughput is the primary constraint.

At 1920x1080, the CPU’s role becomes more prominent. The 110 FPS on Low and 98 FPS on Medium suggest that the GPU can handle the geometry and shading at this resolution, and the CPU’s 20 cores and 28 threads provide enough headroom for the game’s MMO logic. The drop to 66 FPS on High indicates that the GPU is again the bottleneck, but the margin is smaller. The 45 FPS on Ultra shows that the Arc B570’s 144 texture mapping units and 80 ROPs are insufficient for the highest preset even at 1080p. Across all resolutions, the pattern is consistent: the GPU limits performance at high settings and high resolutions, while the CPU only becomes relevant at lower resolutions and lower presets where the GPU has spare capacity.

FAQ

Q: Can this PC run Archeage at 4K?

A: No. At 3840x2160, the best average frame rate is 42 FPS on Low settings, with Medium at 38 FPS and High at 26 FPS. All presets fall below the 60 FPS playability threshold.

Q: What is the highest playable setting at 1440p?

A: Medium is the highest playable setting at 2560x1440, delivering 66 FPS average with a 56 FPS minimum and 76 FPS maximum. Low also plays at 74 FPS, but High and Ultra are not playable.

Q: What frame rate does the 1080p High preset achieve?

A: The 1920x1080 High preset achieves 66 FPS average, matching the 1440p Medium result. This is the highest playable setting at 1080p, with Low at 110 FPS and Medium at 98 FPS.

Q: Is the Ultra preset ever playable?

A: No. Ultra settings produce 17 FPS at 4K, 31 FPS at 1440p, and 45 FPS at 1080p, all below the 60 FPS threshold.

Q: How does this combo rank among tested systems?

A: The combo ranks 2983 out of 3708 tested combinations for Archeage, placing it in the lower portion of the database.

Q: Does the CPU or GPU matter more at 1080p?

A: At 1920x1080, the GPU becomes the limiting factor at High and Ultra settings, while the CPU has more influence at Low and Medium. The 110 FPS on Low versus 66 FPS on High indicates the GPU’s shading and texture throughput is the primary constraint at higher presets.

How This Combo Ranks

The Intel Core i7-14700KF and Intel Arc B570 combination ranks 2983 out of 3708 tested combos in Archeage, placing it in the bottom 20 percent of systems in the database. This ranking reflects the GPU’s mid-range position, with the Arc B570 sitting at the 65th percentile of all GPUs, while the CPU is far stronger at the 94th percentile of all CPUs. The mismatch between the two components is evident in the benchmark data: the CPU is capable of far higher frame rates, but the GPU holds the system back, particularly at higher resolutions and settings. In practical terms, this combo behaves like a system with a high-end CPU and a mid-range GPU, which is consistent with the measured results showing playable performance only at 1440p Medium or 1080p High. Users seeking higher frame rates at 4K or Ultra settings would need a more powerful GPU to complement the i7-14700KF’s compute capabilities.