Archeage

The Intel Core i7-14700F and NVIDIA GeForce RTX 5070 combination delivers a wide performance envelope in Archeage, with the measured data showing a substantial gap between the lowest and highest settings at every resolution. The CPU sits at the 91st percentile among all tested processors, while the GPU ranks at the 82nd percentile, but the in-game results show that the pairing behaves differently depending on the workload.

Similar Performance Alternatives

The nearest rivals for the Intel Core i7-14700F, based on average benchmark scores, include the Intel Xeon 6505P, which scores 53701 and trails by 0.2 percent, and the Intel Xeon Phi 7290, which scores 53469 and leads by 0.3 percent. The AMD Ryzen 9 7900X scores 53288, sitting 0.6 percent behind the i7-14700F, while the AMD EPYC 7313P scores 53206, trailing by 0.8 percent. These deltas are remarkably tight, meaning that a system built around any of these four processors would produce nearly identical CPU-bound performance in Archeage, provided the GPU remains the same.

For the NVIDIA GeForce RTX 5070, the nearest rivals are the AMD Radeon Pro 580, which scores 40318 and trails by 0.1 percent, and the AMD Radeon Pro WX 7100, which scores 40063 and trails by 0.8 percent. The AMD Radeon Pro 5300 scores 40870, leading by 1.2 percent, while the NVIDIA RTX A500 Mobile scores 39568, trailing by 2 percent. The spread here is slightly wider than the CPU’s, but still narrow enough that swapping the RTX 5070 for any of these cards would yield similar frame rates in most scenarios, though the desktop-oriented architecture of the RTX 5070 may handle sustained loads differently than the professional and mobile parts.

CPU and GPU Roles

The data shows that Archeage scales heavily with resolution, which indicates the GPU becomes the primary bottleneck at higher pixel counts. At 1920x1080, the Ultra preset delivers 94.5 FPS, and the Low preset reaches 226.1 FPS, a difference of 131.6 FPS that demonstrates how much headroom the CPU provides at lower resolutions. Moving to 2560x1440, the Ultra preset drops to 66 FPS, a 30.2 percent reduction from the 1080p figure, while the Low preset falls to 155.2 FPS, a 31.4 percent reduction. This consistent scaling across presets suggests the GPU is now the limiting factor, as the CPU’s workload does not change with resolution.

At 3840x2160, the pattern becomes more pronounced. The Ultra preset falls to 33.6 FPS, which is 64.4 percent lower than the 1080p Ultra result, while the Low preset drops to 88 FPS, a 61.1 percent reduction. The Medium preset at 4K reaches 75.4 FPS, which is higher than the Ultra preset at 1440p at 66 FPS, showing that the GPU has more influence over the frame rate than the settings preset alone. The CPU’s role is most visible at 1080p, where even the Ultra preset stays above 90 FPS, and the Low preset approaches 230 FPS, indicating that the i7-14700F can feed the RTX 5070 sufficiently at lower resolutions without becoming the limiting factor.

Measured FPS Breakdown

At 1920x1080, the Low preset produces an average of 226.1 FPS, the Medium preset reaches 203.1 FPS, and the High preset delivers 138.4 FPS. The Ultra preset at this resolution averages 94.5 FPS, which is the lowest result but still well above the 60 FPS playability threshold. The gap between Low and Medium is 23 FPS, while the gap between Medium and High is 64.7 FPS, and the gap between High and Ultra is 43.9 FPS, showing that the High preset represents a significant step down from the lower settings.

At 2560x1440, the Low preset averages 155.2 FPS, the Medium preset reaches 137.5 FPS, and the High preset delivers 94.7 FPS. The Ultra preset at this resolution averages 66 FPS, which is the only preset that comes close to the playability threshold. The differences between presets are 17.7 FPS from Low to Medium, 42.8 FPS from Medium to High, and 28.7 FPS from High to Ultra, indicating that the High preset is the point where the GPU starts to struggle relative to the lower settings.

At 3840x2160, the Low preset averages 88 FPS, the Medium preset reaches 75.4 FPS, and the High preset delivers 52.3 FPS. The Ultra preset at this resolution averages 33.6 FPS, which is below the playability threshold and represents a significant drop from the High preset. The differences are 12.6 FPS from Low to Medium, 23.1 FPS from Medium to High, and 18.7 FPS from High to Ultra, showing that the High preset at 4K is where the RTX 5070 begins to fall behind the demands of the game.

The Verdict

The data indicates that this combination can run Archeage at 60 FPS or higher in most configurations. At 1920x1080, all four presets clear the 60 FPS threshold, with the Ultra preset at 94.5 FPS being the most demanding setting that remains playable. At 2560x1440, all four presets also clear the threshold, with the Ultra preset at 66 FPS being the highest setting that stays above 60 FPS. At 3840x2160, the Low preset at 88 FPS and the Medium preset at 75.4 FPS are playable, but the High preset at 52.3 FPS and the Ultra preset at 33.6 FPS fall short of the 60 FPS threshold.

The verdict by resolution confirms that the best playable setting at 3840x2160 is Medium, which averages 75.4 FPS. At 2560x1440, the best playable setting is Ultra at 66 FPS, and at 1920x1080, the best playable setting is also Ultra at 94.5 FPS. The data shows that the system is capable of running the game at maximum settings for 1080p and 1440p, but at 4K, users must step down to Medium to maintain smooth performance.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which averages 75.4 FPS. The Low preset also clears the threshold at 88 FPS, but Medium offers a higher visual quality while still providing a comfortable margin above the playability threshold. The High preset at 52.3 FPS and Ultra at 33.6 FPS are not recommended for 4K play.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 66 FPS. This provides a 6 FPS margin above the threshold, which is sufficient for most gameplay but may dip in heavy combat scenarios. The High preset at 94.7 FPS offers more headroom, while the Medium preset at 137.5 FPS and Low at 155.2 FPS are well above the threshold.

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 94.5 FPS. This provides a 34.5 FPS margin above the threshold, making it a stable choice for the highest visual quality. The High preset at 138.4 FPS, Medium at 203.1 FPS, and Low at 226.1 FPS all provide even more headroom, but Ultra is the best balance of quality and performance.

FAQ

Q: Can this PC run Archeage at 4K resolution?

A: Yes, but only at Low or Medium settings. The Low preset averages 88 FPS, and the Medium preset averages 75.4 FPS. The High preset at 52.3 FPS and Ultra at 33.6 FPS do not meet the 60 FPS playability threshold.

Q: What is the best preset for 1440p gaming with this combination?

A: The Ultra preset at 2560x1440 averages 66 FPS, which is the most demanding setting that stays above the 60 FPS threshold. The High preset at 94.7 FPS provides more headroom if needed.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i7-14700F has an average benchmark score of 53620, which is within 0.8 percent of the AMD EPYC 7313P and within 0.6 percent of the AMD Ryzen 9 7900X. The Intel Xeon 6505P trails by 0.2 percent, and the Intel Xeon Phi 7290 leads by 0.3 percent.

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset averages 226.1 FPS, while the Ultra preset averages 94.5 FPS, a difference of 131.6 FPS. The Medium preset at 203.1 FPS and High at 138.4 FPS fall between these two extremes.

Q: Is the GPU or CPU more important for Archeage at 4K?

A: The data shows that the GPU becomes the limiting factor at 3840x2160. The Ultra preset drops to 33.6 FPS from 94.5 FPS at 1080p, while the Low preset drops to 88 FPS from 226.1 FPS, indicating that resolution scaling is primarily GPU-bound.

Q: How does this combination rank among other tested combos in Archeage?

A: This combination ranks 668 out of 3708 tested combinations, placing it in the top 18 percent of all combos tested for this game.

How This Combo Ranks

The Intel Core i7-14700F and NVIDIA GeForce RTX 5070 combination ranks 668 out of 3708 tested combos in Archeage, placing it in the 82nd percentile of all tested configurations. This ranking reflects the strong performance at 1080p and 1440p, where the system can run Ultra settings above 60 FPS, while the 4K results pull the overall standing down slightly due to the High and Ultra presets falling below the playability threshold.

The CPU’s 91st percentile ranking among all processors and the GPU’s 82nd percentile ranking among all GPUs suggest that the CPU has more headroom relative to its peers than the GPU, but the in-game data shows that the GPU is the limiting factor at higher resolutions. At 1080p, the system demonstrates excellent performance with the Low preset reaching 226.1 FPS, but at 4K, even the Medium preset at 75.4 FPS requires a significant compromise in visual quality. The rank of 668 indicates that while this combination is well above average, there are many other combos that handle 4K Ultra settings more effectively, likely due to more powerful GPUs.